Multiplier Wheel Nut Wrench.
Bebas
24
0
0
Teks penuh
Gambar
+4
Garis besar
Dokumen terkait
Wheel rim is the outer circular design of the metal on which the inside edge of the tire is mounted on vehicles such as automobiles and types of rims include wire spoke, steel
Based on the title design of two seated three wheel vehicle, this design will be concentrated on body vehicle, interior vehicle such as seat, dashboard
The purpose of this project is to apply modern technologies such as Computer Aided Design (CAD), Reverse Engineering (RE), and Rapid Prototyping (RP) in the product development..
As computer-aided design has become more popular, reverse engineering becomes a viable method to create a 3D virtual model of an existing physical part for use in 3D
More specifically, AMT can be descri- bed as a group of computer-based technologies, in- cluding: Computer aided design (CAD), Computer aided manufacturing (CAM),
The results obtained from the study of this development as follows: 1 to generate a Computer- Aided Design CAD-based learning module, 2 the validity of the module was declared valid
