Effects Of Carburizing On Mechanical Properties Of Low Alloy Steel.
Bebas
24
0
0
Teks penuh
Dokumen terkait
Heat treatment is a combination of heating and cooling that applied to a particular metal in order to produce a certain microstructure and obtain the desired
Quenching and tempering process are two common processes that are used in the industrial. Quenching is the process where the steel is rapidly cooled after carburizing by
To study and discuss the effects of carburizing time and temperature variation on fracture properties of carburized low carbon steel using statistical analysis.. 1.3 Scope
* Tesis dimaksudkan sebagai tesis bagi ljazah Doktor Falsafah dan Sarjana secara penyelidikan, atau disertasi bagi pengajian secara kerja kursus dan penyelidikan, atau Laporan
to pearlite cannot occur and the new phase obtained by quenching was called martensite. Martensite was a supersaturated metasta ble phase and has body centered
Pengaruh temperatur pada penelitian ini umumnya menunjukkan kenaikan nilai kekerasan pada setiap variasi waktu dan kadar energizer, namun pada proses dengan menggunakan
Heat treatment conditions increased the hardness and ultimate tensile strength compared with the as-sheet condition while %elongation gradually decreased.. For heat treatment
In the selected references, from the experiments that were conducted using optical microscopy OM, scanning electron microscopy coupled with electron dispersive spectroscopy, Tensile
