Screen Color Settings

(1)

ENGLISH

Screen Color Settings

From step 4 above, pressing number ‘0’ [ ] will change the value to ‘0’ and automatically make minor channel adjustments.

If minor channel adjustment is on manual, then changing to the current channel will not perform automatic channel adjustment.

1

2 Undoing a channel adjustment

Press [MENU]. -The menu will appear.

Press [] to move to <Channel>, then press [OK].

-The <Channel> Menu will appear.

Press [] to move to <Fine Tune>, then press [OK].

-The <Fine Tune> Menu will be selected.

Press [] to adjust.

Press [EXIT] to exit the menu.

1 2

3 4 5

Unstable Screen

If a dashed line or no color appears, the screen is unstable, therefore try channel adjustments.

(This is only available for analog broadcasting.) Press [MENU]. -The menu will appear.

Press [] to move to <Picture>, then press [OK].

-The <Picture> Menu will appear.

Press [] to move to <Color Temperature>, then press [OK].

-The <Color Temperature> Menu will appear.

Press [] to move to a menu.

-Press [] to move to <Normal>, <Cool> or <Warm>.

1 2

3

4

5

Useful Tips

☛ TThhee PPCC aanndd HHDDMMII iinnppuuttss ssuuppppoorrtt nnoott oonnllyy ssccrreeeenn ccoolloorr mmooddee bbuutt aallssoo RR,,GG,,BB ccuussttoomm mmooddee ffuunnccttiioonnss..

☛ TThhee ssccrreeeenn ccoolloorr mmooddee aanndd ccuussttoomm aaddjjuussttmmeenntt vvaalluuee ((PPCC,,HHDDMMII)) aarree ssaavveedd iinnddiivviidduuaallllyy ((TTVV,,AAVV11,,22,, SS--VVIIDDEEOO eettcc))..

(2)

Set your selection to <ON> to watch your movies titles at the best quality. You will be able to watch with a more realistic movie screen.

Film Mode Settings

Press [] to move to <Film Mode>, then press [OK].

-The <Film Mode> Menu will appear.

Press [] to move to <On>.

-Press [] to toggle <Film Mode> between <Off> and <On>.

1 2

3

4

5

Useful Tips

☛ EEvveenn iiff ffiillmm mmooddee iiss aaccttiivvaatteedd,, tthhee ssiiggnnaall ssttaattuuss mmaayy ttaakk pprreecceeddeennccee..

Useful Tips

☛ Depending on the input signal, the screen size may not be selected.

☛ The screen size may be saved individually according to the input signal (digital TV, analog TV, external input1,2, S-video etc).

You can select the size of the screen depending on the type of program.

Adjusting the Screen Size

Press [] to move to <Screen Format>, then press [OK].

-The <Screen Format> Menu will appear.

Press [] to select a <Screen Format>. -The screen size will be selected.

1 2

3 4 5

■16 : 9 : The screen size for DVDs or wide broadcast programs.

■Panorama : A 16:9 screen shown as naturally as a 4:3 screen.

■Expansion : Expands the 4:3 screen sideways and shows only the center area.

■Caption Expansion : A 16:9 screen shown as naturally as a 4:3 screen.

■4 : 3 : For video and the current broadcast screen ratio.

Screen Size Menu

Press [ASPECT]

Each press switches between

<16: 9>, <Panorma>,<Zoom1>,

<Zoom2> and <4: 3>.

If you force a still picture or use the basic (4:3) screen over a long time, then the LCD TV can show some residual images. These problems are not covered by the warranty. If possible try to utilise full screen mode.

Useful Tips

☛ Some screen modes might not be selectable depending on the input signal.

☛ While watching digital broadcasting or if the input mode is HDMI or via PC, only the 4:3 or 16:9 screens can be selected.

☛ For HDMI input, the screen size selection can be either PC mode or TV mode. The difference is the ratio of the amount cut left, right, at the top and below.

(3)

ENGLISH

Capturing a Still screen

You can pause a scene on the screen.

Dolby Digital

This product is under licence of Dolby Laboratories.

The “Dolby” or D symbol is a trademark of Dolby Laboratories.

Digital Audio Output Settings

You can select your digital audio output as <Dolby Digital> or <PCM>.

Press [] to move to <Sound>, then press [OK].

-The <Sound> Menu will appear.

Press [] to move to <Digital Output>, then press [OK].

-The <Digital Output> Menu will appear.

Press [] to move to <Dolby digital> or <PCM>, then press [OK].

-With Digital sound, <Dolby digital> or <PCM> will be output.

1 2

3

4

5

Useful Tips

☛ <<DDoollbbyy ddiiggiittaall>> ccaann bbee sseelleecctteedd wwhhiillee aa ddiiggiittaall broadcast is on or HDMI is connected.

☛ HHDDMMII ccaann oonnllyy bbee uusseedd wwhheenn ddoollbbyy ddiiggiittaall aauuddiioo iiss aalllloowweedd.. IIff nnoott,, PPCCMM wwiillll bbee oouuttppuutt nnoo mmaatttteerr wwhhaatt mmooddee hhaass bbeeeenn sseett..

☛ PCM (Pulse Coded Modulation): A digital signal without compression; with optical output your sound output will be used for the AV Amp that cannot support Dolby Digital 5.1 channel.

Press [STILL].

Each press of the button will capture a still image.

Useful Tips

☛ AAuuddiioo wwiillll ccoonnttiinnuuee ttoo ooppeerraattee wwhhiillee tthhee ssccrreeeenn iiss ppaauusseedd..

☛ PPrreessssiinngg aa cchhaannnneell nnuummbbeerr oorr iinnppuutt ssiiggnnaall wwiillll aauuttoommaattiiccaallllyy ccaanncceell tthhee ffuunnccttiioonn..

(4)

You can adjust the mode to Music, Movie, Sports, or News depending on the type of program you are watching.

Sound Mode Settings

Press [] to move to <Mode>, then press [OK].

-The <Mode> Menu will appear.

Press [] to select a sound mode.

-Pressing [] will change the settings to <Standard>, <Music>,

<Movie>, <News>, <Sports> or <Manual>.

1 2

3

4

5

You can adjust low/high sound as required.

Custom Sound Mode Settings

Sound mode

■Standard : Basic sound mode.

■Music : Experience live and natural sound.

■Movie : Experience the marvels of surround sound as in a movie theater.

■Sports : Experience the passion of the real playground.

■News : You can hear the sound of the newsanchor clearly.

■Manual : You can create your own sound mode.

Press [] to move to <Mode>, then press [OK].

-The <Mode> Menu will appear.

Press [] to select <Manual> mode.

-The <Manual> menu will appear.

Press [] to select either low or high sound as required, then press [¥] to change the volume.

-Adjust to low or high sound.

1 2

3

4

5

6

Useful Tips

☛ You can use the equalizer to adjust <Standard>, <Music>, <Movie>,

<Sports>, <News> mode to change the <Mode> to <Manual>.

(5)

ENGLISH

Press [] to move to <Balance>, then press [OK].

-The <Balance> Menu will appear.

Press [¥] to change the sound to the left/right.

-You can adjust the volume of the left/right speaker.

1 2

3

4

5

Sound Balance Settings

You can balance your speakers for better sound quality.

Press [] to move to <Auto Volume>, then press [OK].

-The <Auto Volume> Menu will appear.

Press [] to move to <On> or <Off>, <then press [OK].

1 2

3 4 5

Automatic Volume Control Settings

You can automatically adjust the sound level of different channels to the proper volume level which make it out differently from each channel.

(6)

Press [] to move to <Multi-Track>, then press [OK].

-The <Multi-Track> Menu will appear.

Press [] to select <English>, <Spanish>, or <French>, then press [OK].

-The sound settings primarily set up the language. But in the menu, you can select your favorite language settings no matter what the broadcasting status.

1 2

3

4

5

Press [] to move to <Multi-Track>, then press [OK].

-The <Multi-Track> Menu will appear.

Press [] to move to <Mono>, <Stereo> or <SAP>, then press [OK].

-The selected sound will be set.

1 2

3

4

5

Sound (Digital Broadcasting) Settings

Press [MTS] to listen to other languages.

■When English is set as the primary language, pressing [MTS] will change between <English>, <Spanish>, and <French> in this order.

(Languages are only available when provided by a broadcasting station.)

■When changing the channel, the set language will be selected.

Sound (Analog Broadcasting) Settings

Press [MTS].

■You can select your favorite settings <Mono>, <Stereo> or <SAP>.

Useful Tips

☛ TThhee ssoouunndd sseettttiinnggss aarree oonnllyy ssuuppppoorrtteedd iinn TTVV ((aannaalloogg bbrrooaaddccaasstt)) mmooddee..

☛ <<SStteerreeoo>>,, <<SSAAPP>> wwiillll oonnllyy ooppeerraattee wwhheenn aa nneettwwoorrkk ssiiggnnaall iiss aavvaaiillaabbllee..

While Mono is on air

■All modes will have mono sound.

While Stereo is on air

■Mono : Mono sound is selected.

■Stereo : Stereo sound is selected.

■SAP : Mono sound is selected.

While SAP is on air

■Mono : Mono sound is selected.

■Stereo : Mono sound is selected.

■SAP : SAP sound is selected.

(7)

ENGLISH

Automatic Time Settings

If you set your auto time setting, your time will be shown through digital broadcast received information.

Press [] to move to <Setup>, then press [OK].

-The <Setup> Menu will appear.

Press [] to move to <Time>, then press [OK].

-The <Time> Menu will appear.

Press [] to move to <Clock>, then press [OK].

-The <Clock> Menu will appear.

Press [] to select <Auto>.

1 2

3

4 5 6

Manual Time Settings

Setting the year, month, day, hours and minutes can be done by pressing the numeric buttons.

Press [] to move to <Clock>, then press [OK].

-The <Clock> Menu will appear.

Press [] to move to <Manual>, then press [OK].

-The <Manual Clock> item can be selected.

Press [] to move to <Manual Clock>, then press [OK].

Press [], [¥] to change the year, month, day, am/pm, hours and minutes.

1 2

3

4

5 6 7

8

Useful Tips

☛ TThhee ttiimmee wwiillll bbee sseett aauuttoommaattiiccaallllyy bbyy tthhee ddiiggiittaall bbrrooaaddccaassttiinngg iinnffoorrmmaattiioonn..

☛ TThheerree mmaayy bbee aa sslliigghhtt eerrrroorr iinn tthhee ttiimmee ddeeppeennddiinngg oonn tthhee bbrrooaaddccaasstt ssttaattiioonn..

☛ PPrreessssiinngg [[IINNFFOO]] wwiillll sshhooww tthhee ccuurrrreenntt ttiimmee..

(8)

Users can select Daylight Saving.

Time and Date Settings

Press [] to move to <Daylight Saving>, then press [OK].

-The <Daylight Saving> Menu will appear.

Press [] to move to <Yes>, then press [OK].

-Select <Yes> for Daylight Saving, and <NO> to cancel Daylight Saving.

1 2

3

4

5

6

Users can select the time zones.

Time Zone Settings

Press [] to move to <Time Zone>, then select [OK].

-The <Time Zone> Menu will appear.

Press [] to move to your local area, then press [OK].

1 2

3

4

5

6

(9)

ENGLISH

TV Activation Time Settings

You can set a time for the TV to automatically turn-on.

Press [] to move to <On Time>, then press [OK].

-The <On Time> Menu will appear.

Press [], [¥] to set the <AM/PM>, <hours>, <minutes>,

<channel>, <volume> and <time period to turn-on>.

1 2 3 4

5

6

Useful Tips

☛ TThhee ttuurrnn oonn ppeerriioodd ccaann bbee sseett ttoo <<CCaanncceell>>,, <<EEvveerryyddaayy>> oorr <<OOnnccee>>..

■<<CCaanncceell>> :: AAuuttoommaattiicc ttuurrnn--oonn wwiillll bbee ddeeaaccttiivvaatteedd..

■<<OOnnccee>> :: TThhee TTVV aauuttoommaattiiccaallllyy ttuurrnnss oonn OONNCCEE aatt tthhee sseett ttiimmee..

■<<EEvveerryyddaayy>> :: TThhee TTVV wwiillll ttuurrnn oonn eevveerryyddaayy aatt tthhee sseett ttiimmee..

TV Deactivation Time Settings

You can select the time to turn off the TV.

Press [] to move to <Off Time>, then press [OK].

-The <Off Time> Menu will appear.

Press [], [¥] to set the <AM/PM>, <hours>,

<minutes> and <turn-off period>.

4

5

6

Useful Tips

☛ TThhee ttuurrnn--ooffff ppeerriioodd ccaann bbee sseett ttoo <<CCaanncceell>>,, <<EEvveerryyddaayy>> oorr <<OOnnccee>>..

■<<CCaanncceell>> :: TThhee TTVV ttuurrnn--ooffff ttiimmee iiss ddeeaaccttiivvaatteedd..

■<<OOnnccee>> :: TThhee TTVV wwiillll ttuurrnn ooffff OOnnccee aatt tthhee sseett ttiimmee..

■<<EEvveerryyddaayy>> :: TThhee TTVV wwiillll ttuurrnn ooffff eevveerryyddaayy aatt tthhee sseett ttiimmee..

TV Auto Deactivation Time Settings

If there is no signal on the TV for 15 minutes or more, or if no button is pressed for more than 3 hours, this function turns off the TV automatically.

Press [] to move to <Auto Off>, then press [OK].

-The <Auto Off> Menu will appear.

Press [] to select <On>.

4 5 6

Useful Tips

☛ IIff <<aauuttoommaattiicc ttuurrnn--ooffff>> iiss aaccttiivvee,, tthheenn tthhee TTVV wwiillll ttuurrnn ooffff wwhheenn tthheerree iiss nnoo ssiiggnnaall oonn tthhee TTVV oorr tthheerree iiss nnoo eexxtteerrnnaall iinnppuutt ssiiggnnaall ffoorr 1155 mmiinnuutteess oorr mmoorree..

☛ IIff <<aauuttoommaattiicc ttuurrnn--ooffff>> iiss aaccttiivvee aanndd tthhee TTVV iiss ttuurrnneedd oonn bbyy tthhee <<ttuurrnn--oonn>> ooppttiioonn aanndd nnoo bbuuttttoonn iiss pprreesssseedd ffoorr 33 hhoouurrss,, tthhee TTVV wwiillll aauuttoommaattiiccaallllyy ttuurrnn ooffff..

(10)

This option sets up or changes the password for blocking specific channels.

Entering a PIN

Press [MENU].

-The menu will appear.

Press [] to move to <V-Chip>, then press [OK].

-The <Password Dialog Box> Menu will appear.

When first accessing the V-Chip menu, no password is set up.

When no password is set up, channels cannot be blocked.

You need to set the password of the <V-chip> then go to

<Changing PIN> and set it to <ON>. If a User loses the password, the Master Password needs to be used.

Enter the 4-digit password (0~9) using the remote control.

-The <V-Chip> Menu will appear.

Press [] to move to <Changing PIN>, then press [OK].

-The <Changing PIN> Menu will appear.

Use the keypad to set up the new password.

Please confirm your password by entering your 4-digit password again using the remote control.

-The password is set or changed.

Press [] to move to <On/Off>, then press [OK].

-The <On/Off> Menu will appear.

Press [] to move to <On>, then press [OK].

-You will block certain channels, and you can also select

<TVPG Rating>, <MPAA Rating>, <Can.English Rating>,

<Can.French Rating>.

Pressing <Off> will unblock the channels.

1

2

3

4

5 6 7

8

9

10

(11)

ENGLISH

TVPG Rating

You can block programs based on the TV program rating.

Press [MENU].

-The menu will appear.

Enter your 4-digit password using the keypad (0~9).

-The <V-Chip> Menu will appear.

Press [] to move to <TVPG Rating>, then press [OK].

-The <TVPG Rating> Menu will appear.

Press [], [¥] to move to a rating, then press [OK].

-The lock symbol will be marked, and the rating will be set.

Pressing [OK] will display the Unlock symbol and cancel the setting.

1

2

3

4

5

6

7

Useful Tips

☛ Description of the TV (FCC) Rating Codes:

TV (FCC) Age Categories

■TV-MA : Mature audiences only. This program may contain mature themes, profane language, graphic violence and explicit sexual content.

■TV-14 : Parents strongly cautioned. This program may contain sophisticated themes, sexual content, strong language and more intense violence.

■TV-PG : Parental guidance suggested. The program may contain infrequent coarse language, limited violence, some suggestive sexual dialog and situations.

■TV-G : General audience. This contains little or no violence, no strong language, and little or no sexual dialog or situations.

■TV-Y7 : Directed for older children. Themes and elements in this program may include mild physical or comedic violence, or may frighten children under the age of seven.

■TV-Y : All children. The themes and elements in this program are specifically designed for a very young audience, including children from ages two - six.

TV (FCC) Content Sub-Categories:

V : Violence.

S : Sexual content.

L : Offensive language.

D : Dialog...sexual innuendo.

FV : Fantasy or cartoon violence.

TV (FCC) Guidelines:

Suppose, for example, the TV-PG rating and all of its V, S, L and D sub-categories are locked. In that case, all of the “more restrictive” ratings (TV-14 and TV-MA) and all of their V, S, L and D sub-categories are automatically locked out as well. The two groups (TV-Y/TV-Y7 and TV-G/TV-PG/TV-14/TV-MA) are controlled independently.

(12)

Restricting movies by their rating.

MPAA Ratings

Enter your 4-digit password (0~9) using the remote control.

The <V-Chip> Menu will appear.

Press [] to move to <MPAA Rating>, then press [OK].

-The <MPAA Rating> Menu will appear.

Press [], [¥] to move to a rating, then press [OK].

Pressing [OK] once more will display the Unlock symbol, and will cancel the rating.

1 2 3 4 5

6

7

Canadian English Ratings

Press [] to move to <Can.English Rating>, then press [OK].

-The <Can.English Rating> Menu will appear.

Press [], [¥] to move to a rating limit, then press [OK].

Pressing [OK] will display the Unlock symbols, and limit the view.

5

6

7

Canadian French Ratings

Press [] to move to <Can.French Rating>, then press [OK].

-The <Can.French Rating> Menu will appear.

Press [], [¥] to select a rating, then press [OK].

-The lock symbol will be appear, and the rating will be set.

Pressing [OK] again will display the Unlock symbol and cancel the rating.

5

6

7

Useful Tips

☛ DDeessccrriippttiioonn ooff tthhee MMPPAAAA aanndd TTVV ((FFCCCC)) RRaattiinngg CCooddeess::

The MPAA Rating System (Movies)

■G : General Audience. No restrictions.

■PG : Children under 13 should be accompanied by an adult.

■PG-13 : Parental guidance suggested. Children under 13 should be accompanied by an adult.

■R : Restricted. Viewers should be 17 or older.

■NC-17 : Not classified. Viewers should be 17 or older.

■X : Adults only.

(13)

ENGLISH

Captions Settings

Press [] to move to <Caption>, then press [OK].

-The <Caption> Menu will appear.

Press [] to move to <On/Off>, then press [OK].

-The <On/Off> Menu will appear.

Press [] to move to <On>, then press [OK].

-Captions will be activated.

-Selecting <Off> will cancel the captions.

1 2

3

4

5

Analog Mode

The Analog Caption function operates in either analog RF channel mode or external input mode (Depending on the broadcasting signal, the Analog Caption function may operate for digital channels.).

Press [] to move to <Analog Mode>, then press [OK].

-The <Analog Mode> Menu will appear.

Press [] to move to <CC1~TEXT4>, then press [OK].

-Analog Caption may be selected.

-Selecting <Off> will cancel the Captions.

1 2

3

4

5

Useful Tips

☛ When captions are <Off>, in case you can't set up <Analog Mode>, <Digital Mode>,

<Digital Font Option> to set up the Caption, setting as <On> may be done.

Useful Tips

☛ IIff aa ccaappttiioonn ssoouurrccee iiss nnoott pprroovviiddeedd bbyy tthhee bbrrooaaddccaassttiinngg ssttaattiioonn oorr bbyy tthhee vviiddeeoottaappee,, ssuubbttiittlleess wwiillll nnoott bbee ddiissppllaayyeedd..

(14)

The Digital Caption function operates for digital channels.

Digital Mode

Press [] to move to <Digital Mode>, then press [OK].

-The <Digital Mode> Menu will appear.

Press [] to move to <Service1~Service6>, then press [OK].

-Digital Caption may be set.

-Selecting <Off> will cancel Digital Captions.

1 2

3

4

5

Useful Tips

☛ If the broadcasting station or videotape does not provide subtitles, there are no viewing captions.

☛ Alternate method to the above method: Simply press the <CAPTION> button on the remote control.

☛ The availability of captions depends on the particular program being broadcast.

Digital Font Options

Press [] to move to <Digital Font Option>, then press [OK].

-The <Digital Font Option> Menu will appear.

Press [] to select <Size~Edge Style>, select the font type mode, then press [OK].

■Size: Adjust the digital caption font size to default, small, standard or large.

■Style: Either default or style0 through style7 can be selected.

■Background/Foreground Color: Either default or from white to cyan can be selected.

■Background/Foreground Opacity: Either default or Solid to Flashing can be selected.

■Edge Style: Either default or none to Right Drop Shadow.

1 2

3

4

5

(15)

ENGLISH

Checking Items before Connecting to a PC

Useful Tips

☛ TThhiiss mmaayy ddiiffffeerr ddeeppeennddiinngg oonn tthhee PPCC aanndd WWiinnddoowwss vveerrssiioonn..

☛ AA TTVV ccaann ssuuppppoorrtt uupp ttoo 3322BBiitt ccoolloorr wwhhiillee bbeeiinngg uusseedd aass aa TTVV mmoonniittoorr..

☛ TThhee ddiissppllaayy mmaayy ddiiffffeerr ddeeppeennddiinngg oonn tthhee mmaannuuffaaccttuurreerr aanndd tthhee WWiinnddoowwss vveerrssiioonn..

☛ You have to select a display resolution which is support by the TV when connecting to a PC, (nclude DVI) otherwise the “Display Mode not supported” message will be displayed.

640 X 350

720 X 400

640 X 480

800 X 600

800 ^X 600

1024 X 768

1366 X 768

Resolution (dot ^Xline)

85 70 60 75 60 75 60 75 85 60

Vertical Frequency [Hz]

37.9 37.9 31.5 37.5 37.9 46.9 48.4 60.0 68.7 47.7

Horizontal Frequency [KHz]

31.500 35.500 25.175 31.500 40.000 49.500 65.000 78.750 94.500 84.250 Clock Frequency [MHz]

Check the list below before connecting a PC to the TV.

PC Settings

■Set your resolution and frequency to a resolution supported by the TV.

■Refer to the instructions when connecting a PC (graphics and sound cards).

■Do not connect the power unless all connections are connected.

Severe damage can be caused if the power is connected while the connections are still being connected.

■Check the terminal of the PC Graphics Card.

Precautions

If the signal from the computer is the same as one of the following standards, then your monitor can be set up automatically. But if it is different, only the power light will be on or there is no screen at all. So please refer to your instruction manual and adjust the frequency accordingly.

Standard Display Settings

First, click on Settings on the Windows Start menu and click on “Control Panel”.

Double click on the Display icon.

Click the “Settings” tab, and select the correct TV-supported screen resolution. You do not need to adjust the color quality.

Click the “Advanced” button. A new window will appear.

Select the “Monitor” tab, and select the correct screen frequency.

You can select the vertical & horizontal frequency if you cannot use the screen frequency.

Press “OK”, close the window, and press “OK” in the Display Properties window.

Turn off the PC and connect to the TV.

1 2 3

4 5

6

7

(16)

If there are any problems using the product, please first consult the list below.

If the list below does not solve the problem, call our Customer Service Center immediately.

Identifying Problems

The TV won't turn on. ^■Check your power cable connection.

I can't view the Basic channels. ^■Check the connection of the antenna cable.

I want to view cable channels. ^■Register with your local cable company then connect their receiver to your TV.

I want to view satellite channels. ^■Setup your Satellite parabola antenna then connect your satellite receiver to the TV.

Digital broadcasting is not functioning.

■Check your antenna cable connection.

■Check if the digital channel selection is correctly connected to your antenna cable.

Problems Solve

Setup and Connection

The Remote Control isn't functioning well.

■Press [input selection] to select the device to play.

■Change the batteries.

■Check the polarity of the batteries.

■Check the angle of the remote control from the product or if there are any obstacles between the remote control and the product.

■Check if you have pressed the correct key for the correct option.

■Try to a bright light position near TV's which transmit a strong light source on TV <remote receiver> window.

I cannot change channels with the remote control.

■Press [input selection] and select <TV>.

■Try to use the remote control for the cable or satellite receiver to change the channel.

External input channels cannot

be selected. ^■Check your external input connection cable.

A Menu cannot be selected. ^■Check if the menu is grayed out, and if it is, that menu cannot be selected.

Menu and Remote Control

Poor quality sound

■Check if the program is in stereo.

■Stereo may not work well in areas with bad reception.

Try using Mono for these areas.

Sound is malfunctioning while using a cable.

■Check your sound connecting cable.

■Check if other channels also have no sound.

■I can see images, but there is no sound.

■Press the volume buttons to increase the sound.

■Try watching a video (if the video has sound, check your cable company).

If there is no problem with the cable receiver, then call our customer service.

■Check if the internal speakers are <OFF>.

There is a malfunction after the volume is increased

■Try to adjust the external devices connected to the TV

(Digital channel receiver, DTV, DVD, Cable channel receiver, video)

■If you can adjust your sound, try to balance the volume of the TV and the external device.

Sound

(17)

ENGLISH

Identifying Problems

Poor picture ^■Is the power cord unplugged? Make sure the power cable is plugged in correctly, then press the power of the remote control.

Black picture ^■Check if external input mode is selected

■Press [external input selection] and select TV Lined and flickering picture.

■Try to finely adjust the channel.

■Are there any TV waves flowing or cordless radio transmitting stations?

Avoid using cordless phones, hair dryers or electrical drills.

Disfunctioning channels. ^■Check if the channel has been selected correctly.

■Try changing the position of the antenna.

Picture with white and black dots.

■Check if your antenna is damaged or any connections are broken.

■Replace your antenna.

Only certain channels are in black and white

■Check if the program is being broadcast in “black and white”.

■Try to check the hue or contrast.

The Sub-Screen is black. ^■Check the power of the external device connected to the TV.

■If the power cord is disconnected, the screen will be black.

Automatic turn-on is inactive.

■When turning off your TV, you need to use the remote control or press the power button on the TV. (If you pull the plug on the TV, the settings will be deleted.)

Screen

The channels are not functioning.

■Connect the antenna connectors again.

■Set to memorize channels in the automatic channel setting again.

■Query the particular broadcasting station.

A limited number of channels are not functioning.

■Change the location or direction of the antenna.

■Try to select a few channels using numbers and memorize them using the add/delete button.

■Query the broadcasting station.

Only UHF (14 ~ 69) Channels

are unavailable. ^■Check if the antenna is able to receive UHF.

Channel

The PC Screen continually appears and disappears.

■Check the connection between the TV and the computer and see if the connector is locked.

A “There is no signal”

message appears.

■This happens if the signal from the video card is too much for the maximum resolution or frequency of the TV.

Try to set the maximum resolution or frequency for the TV.

■See if power save mode of the PC functions properly.

(This is deactivates when any key is pressed or the mouse is moved) The screen is unclear

and blurry.

■Change the frequency and phase adjustment.

■Change the Resolution and frequency to the standard limit.

(1024x768 @ 60Hz)

Monitor

(18)

Specifications

☛

☛ Design and specifications are subject to change without notice.

26” Diagonal

580.8 mm (H) x 328.8 mm (V) 0.1405 mm (H) x 0.4215 mm (V)

1366 x 768 (WXGA) a-Si TFT active matrix

500 cd / m 600 : 1 176 (H) / 176 (V)

2 ch ~ 69 ch 1 ch ~ 139 ch

NTSC-M (Analog), ATSC (Digital) MTS

NTSC-M CVBS, S-VHS 480i, 480p, 720p, 1080i

500mVrms 30 ~ 60kHz

60 ~ 75Hz 16,7 million 1280 x 1024, 60 Hz

1366 x 768, 60 Hz H/V Separate, TTL, P or N VHF, UHF : 75 ohm unbalanced 7W + 7W (2Way 4Speaker, 8Ω) Internal Type AC 110 ~ 240V, 50 / 60Hz

Max. 115W

< 3W

44.1 lbs 27” x 21.5” x 4.1”

(Stand 8.5”)

Remote Control, Battery (AAA type), Operating Instructions Power Cord

Size Display Size

Pixel Pitch Pixel Number

Type Brightness Contrast Ratio Viewing Angle

Air Cable Video System Sound System Color System Video System Video Input Audio Input

Horizontal Vertical Frequency

Resolution Maximum Optimum Sync.

Video Signal Display Colors LCD

RF

TV

VIDEO

Component

Input Signal PC

Weights Audio Output Power Supply Power Consumption

Stand-by Mode Dimension ( W x H x D )

Accessories

Model name TF-TV2609

2

(19)

ENGLISH

☛

32” Diagonal

697.69 mm (H) x 392.25 mm (V) 0.170 mm (H) x 0.510 mm (V)

500 cd / m 600 : 1 176 (H) / 176 (V)

2 ch ~ 69 ch 1 ch ~ 139 ch

500mVrms 30 ~ 60kHz 60 ~ 75Hz 16,7 million 1280 x 1024, 60 Hz

1366 x 768, 60 Hz H/V Separate, TTL, P or N VHF, UHF : 75 ohm unbalanced 7W + 7W (2Way 4Speaker, 8Ω) Internal Type AC 110 ~ 240V, 50 / 60Hz

Max. 145W

< 3W

55.1 lbs 31.9” x 25” x 4.1”

(Stand 9.7”)

Size Display Size

RF

TV

VIDEO

Component

Input Signal PC

Accessories

2

Specifications

(20)

Specifications

☛

37” Diagonal

819.6 mm (H) x 460.8 mm (V) 0.20 mm (H) x 0.60 mm (V)

500 cd / m 600 : 1 176 (H) / 176 (V)

2 ch ~ 69 ch 1 ch ~ 139 ch

500mVrms 30 ~ 60kHz

60 ~ 75Hz 16,7 million 1280 x 1024, 60 Hz

1366 x 768, 60 Hz H/V Separate, TTL, P or N VHF, UHF : 75 ohm unbalanced

15W + 15W (2Way 4Speaker) Internal Type AC 110 ~ 240V, 50 / 60Hz

Max. 190W

< 3W

70.6 lbs 37.1” x 28.5” x 5”

(Stand 11.1”)

Size Display Size

RF

TV

VIDEO

Component

Input Signal PC

Accessories

2

(21)

ENGLISH

☛

42” Diagonal

930.25 mm (H) x 523.01 mm (V) 0.227 mm (H) x 0.681 mm (V)

500 cd / m 500 : 1 176 (H) / 176 (V)

2 ch ~ 69 ch 1 ch ~ 139 ch

500mVrms 30 ~ 60kHz 60 ~ 75Hz 16,7 million 1280 x 1024, 60 Hz

1366 x 768, 60 Hz H/V Separate, TTL, P or N VHF, UHF : 75 ohm unbalanced

15W + 15W (2Way 4Speaker) Internal Type AC 110 ~ 240V, 50 / 60Hz

Max. 210W

< 3W

83.8 lbs 43” x 31.9” x 5.5”

(Stand 11.1”)

Size Display Size

RF

TV

VIDEO

Component

Input Signal PC

Accessories

2

Specifications

(22)

P/N : 941262P11901