Morphological analyses and crystalline structures of anodic TiO2 thin film on Ti6Al4V alloy using phosphate and calcium containing electrolyte under different voltage and calcium molarity.
Bebas
10
0
0
Teks penuh
Dokumen terkait
Interaction between cells and bone implants were showed by the adhesion that covered almost all structure of HA or BCP after 1 day of immersion as shown on Figure 17a and
Hydroxyapatite (HA) and Biphasic Calcium Phosphate (BCP) are widely used as bone implant materials because of its biocompatibility.. The minimum requirement of
Berdasarkan latar belakang di atas, maka tujuan dari penelitian ini adalah mensintesa HAp dari kerabang telur ayam kampung dan kerabang telur ayam broiler, dan
For the second group, the 20% CaO excess paste, as aforementioned weight, was brought to extrusion after different waiting times.. The mixing process of the first group
CONCLUSION For study TGA, If we compared between PVP and all films that containing on KPF6 and TiO2 for different weight ratio we see that the weight loss was decreases with increase
2.2 Effect of laser power Figure 3 shows the optical micrographs of typical microstructures obtained for Ti6Al4V ELI samples fabricated on the LENS™ system at laser power of 360 W,
In addition, quantitative traits differed between populations and the performed ANOVA test for these characters showed significant difference p = 0.05 for all the studied traits with
