LAMPIRAN I
1.
Router
Cisco 2620XM
Pemberian nama pada
router
:
Router>en
Router#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname R1 R1(config)#end
R1#
%SYS-5-CONFIG_I: Configured from console by console R1#
Langkah pemberian IP
address sub-interface
untuk masing-masing VLAN di
dalam
router
:
R1>en
R1#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#int f0/0
R1(config-if)#no shutdown
R1(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
R1(config-if)#int f0/0.1
%LINK-5-CHANGED: Interface FastEthernet0/0.1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0.1, changed state to up
R1(config-subif)#encapsulation dot1q 1
R1(config-subif)#ip add 192.168.1.1 255.255.255.0 R1(config-subif)#int f0/0.2
%LINK-5-CHANGED: Interface FastEthernet0/0.2, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0.2, changed state to up
R1(config-subif)#encapsulation dot1q 2
R1(config-subif)#ip address 192.168.2.1 255.255.255.0 R1(config-subif)#int f0/0.3
%LINK-5-CHANGED: Interface FastEthernet0/0.3, changed state to up
R1(config-subif)#encapsulation dot1q 3
R1(config-subif)#ip address 192.168.3.1 255.255.255.0 R1(config-subif)#int f0/0.4
%LINK-5-CHANGED: Interface FastEthernet0/0.4, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0.4, changed state to up
R1(config-subif)#encapsulation dot1q 4
R1(config-subif)#ip address 192.168.4.1 255.255.255.0 R1(config-subif)#int f0/0.5
%LINK-5-CHANGED: Interface FastEthernet0/0.5, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0.5, changed state to up
R1(config-subif)#encapsulation dot1q 5
R1(config-subif)#ip address 192.168.5.1 255.255.255.0 R1(config-subif)#exit
R1(config)#end R1#
%SYS-5-CONFIG_I: Configured from console by console
Langkah mengaktifkan konfigurasi
Dynamic Routing
RIP
version
2 di dalam
router
:
R1#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#router rip
R1(config-router)#network 192.168.1.0 R1(config-router)#network 192.168.2.0 R1(config-router)#network 192.168.3.0 R1(config-router)#network 192.168.4.0 R1(config-router)#network 192.168.5.0 R1(config-router)#version 2
R1(config-router)#no auto summary R1(config-router)#exit
R1(config)#end R1#
%SYS-5-CONFIG_I: Configured from console by console
Langkah untuk mengaktifkan konfigurasi DHCP untuk masing-masing VLAN :
R1>en
R1#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#int f0/0.2
R1(config-subif)#ip dhcp pool HRD
R1(dhcp-config)#network 192.168.2.0 255.255.255.0 R1(dhcp-config)#default-router 192.168.2.1
R1(dhcp-config)#dns-server 8.8.8.8
R1(config)#exit R1#
%SYS-5-CONFIG_I: Configured from console by console
R1#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#int f0/0.3
R1(config-subif)#ip dhcp pool Keuangan
R1(dhcp-config)#network 192.168.3.0 255.255.255.0 R1(dhcp-config)#default-router 192.168.3.1
R1(dhcp-config)#dns-server 8.8.8.8
R1(dhcp-config)#ip dhcp excluded-address 192.168.3.1 192.168.3.2
R1(config)#exit R1#
%SYS-5-CONFIG_I: Configured from console by console
R1#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#int f0/0.4
R1(config-subif)#ip dhcp pool IT
R1(dhcp-config)#network 192.168.4.0 255.255.255.0 R1(dhcp-config)#default-router 192.168.4.1
R1(dhcp-config)#dns-server 8.8.8.8
R1(config)#exit R1#
%SYS-5-CONFIG_I: Configured from console by console
R1#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#int f0/0.5
R1(config-subif)#ip dhcp pool Penjualan
R1(dhcp-config)#network 192.168.5.0 255.255.255.0 R1(dhcp-config)#default-router 192.168.5.1
R1(dhcp-config)#dns-server 8.8.8.8
R1(dhcp-config)#ip dhcp excluded-address 192.168.5.1 192.168.5.2
R1(config)#exit R1#
%SYS-5-CONFIG_I: Configured from console by console
2.
Switch
VLAN
Membuat VLAN
database
:
Switch>enable
Switch#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#hostname Switch-VLAN Switch-VLAN(config)#^Z
Switch-VLAN#
Switch-VLAN#vlan database
% Warning: It is recommended to configure VLAN from config mode,
as VLAN database mode is being deprecated. Please consult user
documentation for configuring VTP/VLAN in config mode.
Switch-VLAN(vlan)#vlan 2 name HRD VLAN 2 added:
Name: HRD
Switch-VLAN(vlan)#vlan 3 name Keuangan VLAN 3 added:
Name: Keuangan
Switch-VLAN(vlan)#vlan 4 name IT VLAN 4 added:
Name: IT
Switch-VLAN(vlan)#vlan 5 name Penjualan VLAN 5 added:
Name: Penjualan Switch-VLAN(vlan)#exit APPLY completed.
Exiting....
Mengaktifkan koneksi VLAN ke
router
/naik ke layer 3 inter-VLAN
routing
:
Switch-VLAN#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch-VLAN(config-if)#switchport mode trunk
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
Switch-VLAN(config-if)#end Switch-VLAN#
%SYS-5-CONFIG_I: Configured from console by console
Pemberian
membership
pada VLAN atau IP
subnet address based
:
Switch-VLAN#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch-VLAN(config)#int f0/2
Switch-VLAN(config-if)#switchport mode access Switch-VLAN(config-if)#switchport access vlan 2 Switch-VLAN(config-if)#int f0/3
Switch-VLAN(config-if)#switchport mode access Switch-VLAN(config-if)#switchport access vlan 3 Switch-VLAN(config-if)#int f0/4
Switch-VLAN(config-if)#switchport mode access Switch-VLAN(config-if)#switchport access vlan 4 Switch-VLAN(config-if)#int f0/5
Switch-VLAN(config-if)#switchport mode access Switch-VLAN(config-if)#switchport access vlan 5 Switch-VLAN(config-if)#end
Switch-VLAN#
Setting
Default-gateway
pada VLAN 1 :
Switch-VLAN#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch-VLAN(config)#int vlan 1
Switch-VLAN(config-if)#ip address 192.168.1.2 255.255.255.0 Switch-VLAN(config-if)#no shutdown
%LINK-5-CHANGED: Interface Vlan1, changed state to up Switch-VLAN(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up
Switch-VLAN(config-if)#exit
Switch-VLAN(config)#ip default-gateway 192.168.1.1 Switch-VLAN(config)#end
Switch-VLAN#
