2015 PENGARUH WAKTU POSTSINTERING HEAT TREATMENT (PHT) PAD A KOND UKTIVITAS IONIKELEKTROLIT PAD AT CALCIA STABILIZED ZIRCONIA (CSZ) YANG MENGAND UNG

(1)

Herdyka Sulistiardi , 2015

PENGARUH WAKTU POSTSINTERING HEAT TREATMENT (PHT) PAD A KOND UKTIVITAS

IONIKELEKTROLIT PAD AT CALCIA STABILIZED ZIRCONIA (CSZ) YANG MENGAND UNG SILICA(SiO2) D AN MAGNESIA (MgO)

Universitas Pendidikan Indonesia | repository.upi.edu | perpustakaan.upi.edu DAFTAR PUSTAKA

Azad, A.M., Larose, S., Akbar, A.A. (1994). Review bismuth oxide-based solid electrolytes for fuel cells. Journal of Materials Science, 29, hlm. 4135-4151.

Bazant. (2011). Equivalent circuit models. Lecture 6: Impedance of Electrodes. MIT Student (and MZB).

Bhattacharjee, S., Syamaprasad, U., Galgali, R.K., Mohanty, B.C. (1991). Preparation of calcia stabilised zirconia using a DC plasma. Materials Letters, 11 (2).

Bhatti, A.S., Dollimore, D., Dyer, A. (1984). Magnesia from seawater: a review. Clay

Mineral, 19, hlm. 865-875.

Callister Jr, W.D. (2007). Materials science and engineering: an introduction (7th

Edition). New York: John Wiley & Sons, Inc.

Carter, C.B. dan Norton, M.G. (2013). Ceramic Materials: Science and Engineering

(2th Edition). New York: Springer Science Business Media.

Chaouchi, A. dan Kennour, S. (2012). Impedance spectroscopy studies on lead free

(Ba0.85Ca0.15)(Ti0.9Zr0.1)O3 ceramics. Processing and Application of Ceramics, 6 (4),

hlm. 201-207.

Cho, Y.H., Cho, P.S., Auchterlonie, G., Kim, D.K., Lee, J.H., Kim, D.Y., Park, H.M., Drennan, J. (2007). Enhancement of grain-boundary conduction in gadolinia-doped ceria by the scavenging of highly resistive siliceous phase. Acta Materialia, 55, hlm. 4807–4815.

Colin, S., Dupre, B., Gleitzer, C. (1992). Decalcification of stabilized by silica and some other oxides zirconia by silica. Journal of the European Ceramic Society, 9, hlm. 389-395.

Drozdz, E. (2014). The Influence of the method of addition of Al2O3 to 3YSZ material

on its thermal and electrical properties. J. Therm. Anal. Calorim., 118, hlm. 1345– 1353.

(2)

Universitas Pendidikan Indonesia | repository.upi.edu | perpustakaan.upi.edu

Esparza-Ponce, H.E., Reyes-Rojas, A., Yoshida M.M. (2001). Spherical calcia stabilized zironia powders obtained by spaypyrolysis. Revista Latinoamericana de

Metalurgia y Materiales, 21 (2), hlm. 3-8.

Fahrenholtz, W.G. (2004). Ceramic Engineering 11: Sintering. Lab Report. Rolla: University of Missouri.

Gomadam, P.M. dan Weidner, J.W. (2005). Analysis of electrochemical impedance spectroscopy in proton exchange membrane fuel cells. International Journal of

Energy Research, 29, hlm. 1133-1151.

Haile, S.M. (2003). Fuel cell material and components. Acta Materialia, 51, hlm. 5981-6000.

Hirschenhofer, J.H., Stauffer, D.B., Engleman, R.R., Klett, M.G. (1998). Fuel cell

handbook (4th Edition). Reading: Parson Corporation.

Indrayaningsih, N., Muljadi., Febrianto, E.Y. (2008). Studi awal penggabungan antar komponen sel bahan bakar berbasis keramik. Jurnal Fisika Himpunan Fisika

Indonesia, 8 (1), hlm. 12-23.

International Energy Agency. (2007). Energy technology Essentials - Fuel Cell. www.iea.org.

Jin, F. dan Al-Tabbaa, A. (2013). Thermogravimetric study on the hydration of reactive magnesia and silica mixture at room temperature. Thermochimica Acta, 566, hlm. 162-168.

Jung, Y.S., Lee, J.H., Lee, J.H., Kim, D.Y. (2003). Improvement of Grain-Boundary Conduction in 15 mol % Calcia-Stabilized Zirconia by Postsintering Heat-Treatment. Journal of Electrochemical Society, 150 (10), hlm. 49-53.

Kanamura, K., Yoshioka, S., Takehara, Z. (1991). Temperature distribution in tubular solid oxide fuel cell. The Chemical Society of Japan, 64 (6), hlm. 828- 1834.

Kim, N., Hsieh, C., Huang, H., Prinz, F.B., Stebbins, J.F. (2007). High temperature 17O

MAS NMR study of calcia, magnesia, scandia and yttria stabilized zirconia. Solid

(3)

Krauz, M., Radecka, M., Rekas, M. (2011). Impedance spectroscopy study of electrode-electrolyte system in solid oxide fuel cells. Ceramic Materials, 63 (1), hlm. 157-163.

Kumar, P.P. dan Yashonath, S. (2006). Ionic conduction in the solid state. Journal of

Chemistry Sciences, 118 (1), hlm. 135-154.

Kurapova, O.Y. dan Konakov, V.G. (2014). Phase evolution in zirconia based systems.

Review of Advance Materials Sciences, 36, hlm. 177-190.

Lai, W. dan Haile, S.M. (2005). Impedance spectroscopy as a tool for chemical and electrochemical analysis of mixed conductors: A case study of ceria. Journal of the

American Ceramic Society, 88 (11), hlm. 2979-2997.

Laosiripojanaa, N., Wiyaratnb, W., Kiatkittipongc, W., Arpornwichanopd, A., Soottitantawatd, A., Assabumrungratd, S. (2009). Review on solid oxide fuel cell technology. Engineering Journal, 13 (1) 65-83.

Lasia, A. (1999). Electrochemical impedance spectroscopy and its applications. New York: Kluwer Academic/Plenum Publishers.

Lee, J.H., Mori, T., Li, J.G., Ikegami, T., Takenouchi, S. (2001). The influence of alumina addition and its distribution upon grain-boundary conduction in 15 mol.% calcia-stabilized zirconia. Ceramic International, 27, hlm. 269-276.

Music, S., Filipovic-Vincekovic, N., Sekovanic, L. (2011). Precipitation of amorphous

SiO2 particles and their properties. Brazilian Journal of Chemical Engineering, 28

(1), hlm. 89-94.

Muslim, P., Syarif, D.G., Setiawan, A. (2013). Pengaruh penambahan La2O3 terhadap

konduktivitas ionik CSZ sebagai elektrolit padat. Jurnal Sains Materi Indonesia. 15 (1), hlm. 7-11.

Namavar, F., Wang, G., Cheung, C.L., Sabirianov, R.F., Zeng, X.C., Mei, W.N., Bai, J.,

Brewer, J.R., Haideri, H., Garvini, K.L. (2007). Thermal stability of

nanostructurally stabilized zirconium oxide. Nanotechnology, 18,hlm. 1-6.

Novosel, B., Avsec, M., Macek, J. (2008). The interaction of SOFC anode materials with carbon monoxide. Materials and Technology, 42 (2), hlm. 51-57.

(4)

Nuryono. (2010). Peranan kimia dalam pengembangan teknologi material berbasis

silika. Pidato Pengukuhan Jabatan Guru Besar. Yogyakarta: Universitas Gajah

Mada.

Oh, M.H., Kim, K.W., Choi, S., Singh, R.K. (2010). Preparation of monodispersed magnesia coated silica particles through a surface-induced precipitation method.

Powder Technology, 204, hlm. 154-158.

Pena-Martinez, J., Marrero-Lopez, D., Perez-Coll, D., Ruiz-Morales, J.C., Nunez, P. (2007). Performance of XSCoF (X=Ba, La and Sm) and LSCrX’ (X’=Mn, Fe and

Al) perovskite-structure materials on LSGM electrolyte for IT-SOFC.

Electrochimica Acta, 52, hlm. 2950–2958.

Raharjo, J., Dedikarni, Ramli, W.D.W. (2008). Perkembangan teknologi material pada sel bahan bakar padat suhu operasi menengah. Jurnal Sains Materi Indonesia, 10 (1), hlm. 28-34.

Rahmawati, F., Prijamboedi, B., Soepriyanto, S., Ismunandar. (2011). Doping calcia and yttria into zirconia obtained from by product of tin concentrator to improve its ionic conductivity. Institut Teknologi Bandung Journal Sciences, 43 (1), hlm. 9-18. Septawendar. E., Purwasasmita, B.S., Sutardi, S. (2013). Effect of the hydrolysis

catalyst NH4OH on the preparation of calcia stabilized zirconia with sugar as a

masking agent at low temperatures. Journal of the Australian Ceramic Society, 49 (1), hlm. 101-108.

Shen, Q., Chen, C., Fei, C., Li, J., Zhang ,L. (2009). Change of phase compositions in calcia stabilized zirconia using boric acid additive. Journal of the Ceramic Society

of Japan, 117 (4), hlm. 449-451.

Stambouli, A.B. dan Traversa, E. (2002). Solid oxide fuel cells (SOFCs): A review of an environmentally clean and efficient source of energy. Renewable and

Sustainable Energy Review, 6, hlm. 433-455.

Straumal, B., Mazilkin, A., Straumal, P., Myatiev, A. (2008). Distribution of impurities and minor components in nanostructured conducting oxides. International Journal

(5)

Syarif, D.G., Soepriyanto, S., Ismunandar., Korda, A.A. (2013). Effect of LSGM addition on electrical characteristics of 8YSZ ceramics for solid electrolyte. Journal

of the Australian Ceramic Society, 4 (2), hlm. 52-59.

Tipler, P.A. (1998). Fisika Untuk Sains dan Teknik (Edisi ke-3, Jilid 1). Alih bahasa: Prasetio L. dan Adi, R.W. Jakarta: Erlangga.

Xin, G. dan Runzhang, Y. (1996). Design of zirconia grain boundary - An exploration of the design of oxide ceramic grain boundary. Science in China, 39 (3), hlm. 235-243.