DAFTAR PUSTAKA
Antonucci, P. L., Arico, A. S., Creti, P., Ramunni, E., Antonucci, V. 1999. Investigation of a Direct Methanol Fuel Cell Based on a Composite Nafion-Silika Electrolyte for High Temperature Operation. Solid State Ionics. 125, 431–439.
Alberti, G. Casciola, M., Massinelli, L., Bauer, B. 2001. Polymeric proton conducting membranes for medium temperature fuel cells (110-160oC). Journal of Membrane Science, 185: 73-81.
Almeida, S.H., Kawano, Y. 1999. Thermal Behaviour of Nafion Membrane. Journal Thermal Anal. Calorimetry, (58), 3: 589-577
Arico, A.S., Baglio, V., Di Blasi, A., Creti, P., Antonucci, P.L. Antonucci, V. 2003. Influence of the Acid-Base Characteristics of Inorganic Fillers on the High Temperature Performance of Composite Membranes in Direct Methanol Fuel Cells. Solid State Ionics, (161): 251-265.
Arimura, T., Ostrovskii, D., Okada, T., Xie, G. 1999. The Effect of additives on the Ionic Conductivity Performances of Perfluoroalkyl Sulfonated Ionomer Membranes. Solid State Ionics, (118): 1-10.
Baird, D.G. et al. 2004. Polymer Electrolyte Membrane Fuel Cell : Opportunities for Polymers and Composites. Plastic Engineering.
Bossel, U. 2000. The birth of the Fuel Cell. Oberrohrdorf: European Fuel Cell Forum.
Brydson, J.A. 1995. Plastic Materials. 6th ed. Butterworth Heinemann Ltd.
Buchari. 1990. Studi Perbandingan Berbagai Teknik Analisis Penetapan Silikon dalam Senyawa Aluminosilikat. Tesis. Institut Teknologi Bandung. Bandung.
Cacciola, G., Antonucci, V., Freni, S. (2001) Technology up date and new strategies on fuel cells. J. Power Source, 100: 67-79
Carbone, A., Pedicini, R. Portale, G., Longo, A. D’Ilario, L.D., Passalacqua, E. (2006) Sulphonated poly(ether ether ketone) membranes for fuel cell application: Thermal and structural characterisation. J. Power Source, 163: 18-26.
Carrette, L., Friedrich, K.A., Stimming, U. 2001. Fuel Cells – Fundamentals and Applications. Fuel Cells, (1): 5-39.
Cussler, E.L. 1985. Diffusion Mass Transfer in Fluid Systems, Cambridge Univ. Press.
Demuth, TH., Benco, L., Hafner, J., Toulhoat, H. 2001. Adsorption of Water in Mordenite-An ab initio Study. International Journal of QuantumChemistry, (84): 110-116.
Dohle, H., Divisek, J., Jung, R. 2000. Process Engineering of the Direct Methanol Fuel Cell. Journal of Power Sources, (86): 69-477.
Domitrova, P., Friedriech, K.A., Stimming, U., Vogt, B. 2002. Modified Nafion-based membranes for use in direct methanol fuel cells. Solid state ionics, (150): 115-122.
Dupont. 1996. Product Information.
EG&G Services Parsons, Inc. Science Applications International Corporation. Fuel Cell Handbook. U.S. Department of Energy: Morgantown, West Virginia. –
Eniya, L. D. 2005. The Effect of Moisture Absorbing Particle on Methanol Permeability of Modified Nafion Membrane in Fuel Cells. The 3rd Regional Symposium on
membrane Technology for Industry and Enviromental Protection, ITB-Bandung.
Fenton, J.M. Direct Methanol Fuel Cell. ME 295/320 Fuel Cell Engg.
Genova, D.P., Baradie, B. 2001. Ionomeric Membrane for Proton Exchange Membrane Fuel Cell (PEMFC) : Sulfonated Polysulfone Associated with Phosphatoantimonic Acid. Journal of Membrane Science, (185): 59-71.
Gill, M., Xiangling Ji, Xianfeng Li, Hui Na, J. Eric Hampsey, Yunfeng Lu. 2004. Direct synthesis of sulfonated aromatic poly(ether ether ketone) proton exchange membranes for fuel cell applications. Journal of Membrane Science, (234): 75-81.
Handayani S., Eniya L.D. , Widodo W. P., Roekmijati W. S. 2007a. Sintesis dan Karakterisasi Membran Elektrolit Polieter-eter Keton Tersulfonasi. Indoneisa Journal of Material Science, (Vol. 8), No. 2: 129-133.
Handayani S., Eniya L.D. , Widodo W. P., Roekmijati W. S. 2007b. Preparasi Membran Elektrolit berbasis Poliaromatik untuk Aplikasi Sel Bahan Bakar Metanol Langsung Suhu Tinggi. Indoneisa Journal of Material Science, (Vol. 8) No. 3: 192-197.
Handayani S., Eniya L. D., Widodo W. P., Roekmijati W. S. 2007c. Blending Polisulfon dengan Polieter-eter Keton Tersulfonasi untuk Sel Bahan Bakar Metanol Langsung. Jurnal Teknologi, (XXI) No.2: 158-164.
Handayani S., Eniya L.D. , Widodo W. P., Roekmijati W. S. 2007d. Membran Komposit Polieter-eter Keton Tersulfonasi/Zeolit untuk aplikasi Sel Bahan Bakar Metanol Langsung. Indoneisa Journal of Material Science, (8) No. 4:52-56.
aplikasi sel bahan bakar metanol langsung. Jurnal Teknik Kimia Indonesia,(Vol. 6) No.1: 563–570.
Handayani S., Eniya L. D., Hartanto S., Widodo W. P., Roekmijati W. S. 2007f. Increasing Ionic Conductivity by Moisture Absorbing Nanoparticle on Modifed Sulfonated Polyether-ether Ketone Membrane for Direct Methanol Fuel Cells.
Journal Institute for Science and Technology Studies (ISTECS), (X): 79-89.
Handayani S., Eniya L. D., Widodo W. P., Roekmijati W. S. 2008. Proton Transport Properties at High Temperature of Modified Sulfonated Polyether-ether Ketone Membrane for Direct Methanol Fuel Cells Application. Journal of Chemical Engineering of Japan, (Submitted).
Hasiotis, C., Deimede, V. and Kontoyannis, C. 2001. New Polymer Electrolytes based on Blends Sulfonated Polysulfone with Polybenzimidazole. Electrochimica Acta, (46): 2410-2406.
Heinzel, A., Barragan, A.M. 1999. A Review of the State-of-the Art of the Methanol Crossover in Direct Methanol Fuel Cells. Journal of Power Sources, (84): 70-74.
Jiabin H.G., Ge. 2005. Experiment Studies of a Direct Methanol Fuel Cell. Journal of Power Sources, (142): 56-69.
Jones, D.J. and Roziere, J. 2001. Recent Advances in the Functionalisation of Polybenzimidazole and Polyetherketone for Fuel Cell Applications. Journal of
Membrane Science, (185): 41-58.
Jung, B., Kim, B., Yang, J.M. 2004. Transport of Methanol and Protons Through partially sulfonated Polymer blend Membranes for Direct Methanol Fuel Cell.
Journal of Membrane Science, (245): 61-69.
Kerres, J.A., 2001. Development of Ionomer Membranes for Fuel Cells. Journal of
Membrane Science, (185): 3-27.
Kim, Y.S., Wang,F., Hickner, M., Zawodzinski, T.A., McGrath, J.E. 2003. Fabrication and Characterization of Heteropolyacid (H3PW12O40)/Directly Polymerized Sulfonated Poly(Arylene Ether Sulfone) Copolymer Composite Membranes for Higher Temperature Fuel Cell Applications.Journal of Membrane Science, (212): 263-282.
Kopitzke, R.W., Linkous, C.A., Anderson, H.R., Nelson, G.L. 2000. Journal Electrochem. Soc., (147): 1677.
Kreuer, K.D. 2001. On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells. Journal of Membrane Science, (85): 29-39.
Li L., Jun Zhang, Yuxin Wang. 2003. Sulfonated Poly(Ether Ether Ketone) Membranes for Direct Methanol Fuel Cells. , Journal Membrane Science, 226, hal. 159-167.
Lufrano, F., Squadrito, G., Patti A., Passalacqua, E. (2000). Sulfonated Polysulfone as Promising Membranes for Polymer Electrolyte Fuel Cells. J. Appl. Polym. Sci., 77: 1250-1257.
Manea, C. and Mulder, M. 2002. New Polymeric Electrolyte Membranes Based on Proton Donor-Proton Acceptor Properties for Direct Methanol Fuel Cells. Desalination, (147): 179-182.
Manea, C. and Mulder, M. 2002. Characterization of Polymer Blends of Polyethersulfone/sulfonated Polysulfone and Polyethersulfone/Sulfonated Polyetheretherketone for Direct Methanol Fuel Cell Aplications. Journal of
Membrane Science, (206): 443-453.
Mikhailenko, S.D., Zaidi, S.M.J., Kaliaguine, S. (2001). Sulfonated polyether ether ketone based composite polymer electrolyte membranes. Catalysis Today, 67: 225-236.
Mulder M. 1997. Basic Principles of Membrane Technology. (2nd ed.). Boston-London. Kluwer Academic Publisher.
Neburchilov, V., Martin, J., Wang, H., Zhang, J. 2007. Review of Polymer Electrolyte Membranes for Direct Methanol Fuel Cells. J. Power Sources, 169: 221-238.
Nolte,R., Ledjeff,K. 1993. Partially Sulfonated poly(arylene ether sulfone) a Versatile Proton Conducting Membrane Material for Modern Energy Conversation Technologies. Journal of Membrane Science, (83): 211-220.
Nunes, S.P., Ruffmann, B., Riwokowski, E., Vetter, S., Richau, K. 2002. Inorganic Modification of Proton Conductive Polymer Membranes for Direct Methanol Fuel Cells. Journal of Membrane Science (203): 215-225.
Othman, M.H.D., Mustafa, S.L., Ismail, A.F. 2005. Organic/Inorganic Hybrid Membrane for Direct Methanol Fuel Cell Aplication.The 3rd Regional Symposium
on membrane Technology for Industry and Enviromental Protection,
ITB-Bandung.
Poltarzewski Z., Wieczorek W., Przyluski J., Antonnucci V. 1999. Novel Proton Conducting Composite Electrolyte For Application in Methanol Fuel Cells”,
Solid State Ionics, 119: 301-304.
Ramani, V., Kunz, H.R., Fenton, J.M. 2004. Investigation of Nafion/HPA Composite Membranes for High Temperature/Low Relative Humidity PEMFC operation.
Journal of Membrane Science (232): 31-44.
Rikukawa, M. and Sanui, K. 2000. Proton-Conducting Polymer Electrolyte Membrane Based on Hydrocarbon Polymers. Prog.Polym.Sci., (25): 1463-1502.
Robertson, G.P., Mikhaelenko, S.D., Wang, K., Xing, P., Gueiver, M.D. 2003. Casting Solvent Interactions With Sulfonated Poly(ether ether ketone) During Proton Exchange Membrane Fabrication.Journal of Membrane Science (219): 113-121.
Roelofs, M. 2001. Membrane Issues for PEM Fuel Cells. DuPont Fuel Cell, NSF Workshop. Virginia.
Savadogo, O. 2004. Emerging Membranes for Electrochemical Systems Part II. High Temperature Composite Membranes for Polymer Electrolyte Fuel Cell (PEFC) Aplications. Journal of Power Source, (127): 135-161.
Scott, K., Taama, W.M., Argyropolous, P., Sundmacher. 1999. The Impact of Mass Transport and Methanol Crossover on the Direct Methanol Fuel Cell. Journal of
Power Sources, (83): 204-216.
Sancho, T., Soler, J., Pina M.P. (2007). Conductivity in zeolite-polymer composite membranes for PEMFCs. J. Power Sources,169: 92-97.
Solomons, T. W. G. 2004. Organic Chemistry. Eight Edition. John Wiley & Sons Inc.
Xing , P., Robertson, G.P., Guiver, M.D., Mikhaelenko, S.D., Wang, K., Kaliaguine, S. 2004. Synthesis and Charaterization of sulfonated Poly(Ether Ether Ketone) for Proton Exchange Membranes.Journal of Membrane Science, (229), 95-106.
Yamada and Kouichi. Energy Resouce Issue and Direct Methanol Type Fuel Cell Battery. SCEJ 33rd Fall Meeting, Sep/12-14. Hanamatsu. Japan
Weiss, R.A. and Shaw, M.T. 2004. Polymer Blend Proton Exchange Membranes. DOE Hydrogen Program, 357-361.
Woo, Y., Young Oh, Kang, Y.S., Jung, B. 2003. Synthesis and Characterization of Sulfonated Polyimide Membranes for Direct Methanol Fuel Cell. Journal of
Membrane Science (220): 31-45.
Zaidi, S.M.J., Mikhailenko, S.D., Robertson, G.P., Kaliaguine, S. 2000. Proton conducting composite membranes from polyether ether ketone and heteropolyacids for fuel cell applications. J. Membr. Sci. 173: 17-34.
Zhou, W. J. et al. 2003. Performance Comparison of Low-Temperature Direct Alcohol Fuel Cells with Different Anode Catalysts. (Article in Press) Journal of Power
