Makalah dalam jurnal terindeks
BIL TAJUK ARTIKEL NAMA PENGARANG
UTAMA
TAHUN
DITERBITKAN NAMA JURNAL
JENIS INDEKS (ISI/SCOPUS)
1
Effect of Copper Addition on Grain Refinement of Austenite in Fe-8wt.%Ni-(0.3)wt.%Cu Alloy.
J. Syarif and Z. Sajuri. 2010
Sains Malaysiana
39(6): 999-1006. ISI/Scopus
2
Effect of Solution Treatment on Fatigue Crack
Propagation Behavior of Magnesium Alloy.
M.A.M. Daud, Z. Sajuri,
J. Syarif and M.Z. Omar. 2010
International Review of Mechanical Engineering 4(3): 238-243
Scopus
3
Effect of Different Factors on the Acoustic Absorption of Coir Fiber
Mohd Jailani Mohd Nor, Md. Ayub, Rozli Zulkifli, Nowshad Amin and Mohammad Hosseini Fouladi
2010
Journal of
Applied Sciences, Vol.10(22):2887-2892
Scopus
4
Noise Absorption Properties of Coir Fiber with Porous Layer Facing
Rozli Zulkifli, Zulkarnain,
Mohd Jailani Mohd Nor 2010
International Review of Mechanical Engineering, 4(4):405-409
5
Interfacial Treatment of Multi-Layer Woven Silk/Epoxy Composites.
Rozli Zulkifli & Che
Husna Azhari. 2010
International Review of Mechanical Engineering, Vol. 4(1), pp. 1-6.
Scopus
6
Noise Control Using Coconut Coir Fiber Sound Absorber with Porous Layer Backing and Perforated Panel
Rozli Zulkifli, Zulkarnain and Mohd Jailani Mohd Nor
2010
American Journal of Applied
Sciences,
Vol. 7(2), pp. 260-264
Scopus
7
Fabrication of Dense Composite Ceramic
Electrolyte SDC-(Li/Na)2CO3”,
Jarot Raharjo,
Andanastuti Muchtar, Wan Ramli Wan Daud, Norhamidi Muhamad and Edy Heryanto Majlan.
2010
Key Engineering Materials, 447-448:666-670.
Scopus
8
Pencirian Titanium Berbusa yang Dihasilkan pada Suhu Pensinteran yang Berbeza Menggunakan Kaedah Buburan (Characterisation of Titanium Foams Sintered at Different Temperatures Prepared by the Slurry Method)
S. Ahmad, N.
Muhamad, A. Muchtar, J. Sahari, K. R.
Jamaludin, M. H. I. Ibrahim, N. H. Mohamad Nor, & Murtadhahadi
2010
Sains Malaysiana 39(1)(2010): 77– 82.
9
Epoxidized Natural Rubber– Alumina Nanoparticle Composites: Optimization of Mixer Parameters via
Response Surface Methodology.
Noraiham Mohamad, Andanastuti Muchtar, Mariyam Jameelah Ghazali, Dahlan HJ. Mohd, Che Husna Azhari
2010
Journal of
Applied Polymer Science, Vol. 115, 183–189 (2010).
ISI & Scopus
10
Correlation of filler loading and silane coupling agent on the physical characteristics of epoxidized natural rubber-alumina nanoparticles composites.
Noraiham Mohamad, Andanastuti Muchtar, Mariyam Jameelah Ghazali, Dahlan Hj. Mohd and Che Husna Azhari.
2010
Journal of Elastomers and Plastics,
Vol. 42(4):331-346
ISI & Scopus
11
Dry sliding wear behaviour of Al-12Si-4Mg alloy with cerium addition
S. Anasyida, A.R. Daud,
M.J. Ghazali 2010
Materials and Design (31): 365– 374
ISI
12
Effects of calcium
supplements on fracture healing in a rat osteoporotic model
Ahmad Nazrun Shuid, Sharlina Mohamad, Norazlina Mohamed, Fazalina Mohd
Fadzilah, Sabarul Afian Mokhtar, Shahrum Abdullah, Faizah Othman, Farihah Suhaimi, Norliza
2010
Journal of Orthopaedic Research,
28(12):1651-1656.
Mohamed, Ima Nirwana Soelaiman.
13
Modelling of Corelation Between Heat Treatment and Mechanical Properties of Ti-6Al-4V Alloy Using Feed Forward Back Propagation Neural Network
J. Syarif, D.Y. Pratama
and R. Ramli 2010
ISIJ International, 50(11), pp 1689 - 1694
ISI
14
Direct Partial Remelting of XW-42 Steel in Semi Solid Zone,
A. Alfian, M.Z. Omar, J.
Syarif and Z. Sajuri. 2010
J. Applied Sciences, 10(13, pp. 1255-1262.
Scopus
15
Fatigue crack growth
simulation of aluminium alloy under spectrum loadings
S. M. Beden, S.
Abdullah, A. K. Ariffin, N. A. Al-Asady.
2010
Materials and Design. 31(2010) 3449-3456.
ISI
16
Disassembly for Reuse: Implementation in the Malaysian Automotive Industry
Go, T.F., Wahab, D.A., Ab. Rahman, M.N., Ramli, R. and Azhari, C.H.
2010
Australian Journal of Basic and Applied Sciences, 4(10): 4569-4575, 2010
17
Effect of Aged AIN
Reinforced Al-Si Alloys on Dry Sliding Wear Behaviour
Mariyam Jameelah Ghazali, Mahamad Noor Wahab,
Abdul Razak Daud and Jaharah Ab. Ghani,
2010
Advanced Materials Research, 126-128:905-910
CISI
18
Online Cutting Tool Wear Monitoring using I-kaz Method and New Regression Model
Jaharah A. Ghani, Muhammad Rizal, Mohd Zaki Nuawi, Che Hassan Che Haron, Mariyam Jameelah Ghazali, and Mohd Nizam Ab Rahman
2010
Advanced Materials Research, 126-128:738-743
CISI
19
Analysis of pulse air jet flow profiles
Rozli Zulkifli,
Kamaruzzaman Sopian, Shahrir Abdullah & Mohd Sobri Takriff
2010
International Review of Mechanical Engineering, Vol. 4(5), pp. 495-501.
Scopus
20
Effect of filler loading concentration, curing temperature and molding pressure on the electrical conductivity of
CNTs/Graphite/ Epoxy nanocomposites at high
Hendra Suherman, Abu Bakar Sulong, Jaafar Sahari.
2010
International Journal of
Mechanical and Materials
Engineering, 5(1)74-79
loading of conductive fillers.
21
Effects of insert nose redius and machining parameters on the surface roughness of stainless steel 316L
Mohd Fazuri Abdullah, Abu Bakar Sulong, Ilman Hakimi Chua, Che Hassan Che Haron, Jaharah A. Ghani.
2010
Key Engineering Materials, 447-448:51-54
CISI
22
Effects of molding parameters and addition of fillers on gate chip.
Abu Bakar Sulong, Gan Tek Keong, Jaafar Sahari.
2010
Key Engineering Materials, 447-448:790-794.
CISI
23
Electrical conductivity and flexural strength of
graphite/carbon”.
Hendra Suherman, Jaafar Sahari, Abu Bakar Sulong
and Nishata Royan,
2010
Key Engineering Materials, 447-448:643-647
CISI
24
Electrical conductivity and micro hardness of synthetic and natural graphite epoxy composite.
Hendra Suherman, Jaafar Sahari, Abu Bakar Sulong.
2010
Key Engineering Materials, 447-448:614-618.
25
Electrophoretic Deposition of La0.6Sr0.4Co0.2Fe0.8O3-δ Cathode
Film on Stainless Steel Substrates.
Hamimah Abd.Rahman,
Andanastuti Muchtar, Norhamidi Muhamad,
Huda Abdullah, “
2010
Advanced Materials Research, 139-141:145-148.
CISI
26
Optical and structural properties of ZnS thin films grown by CBD technique.
Huda Abdullah, Nor Habibi Saadah, Sahbudin Shaari, Andanastuti Muchtar
2010
Advanced Materials Research, 139-141: pp 149-152.
CISI
27
Optimisation of Processing Parameters of Titanium Foams Using Taguchi Method for Compressive Strength.
Sufizar Ahmad,
Norhamidi Muhamad, Andanastuti Muchtar, Jaafar Sahari, K. R. Jamaludin, M. H. I. Ibrahim and N.H. Mohamad Nor.
2010
Key Engineering Materials, 447-448:671-675.
CISI
28
Sintering Effects on LSCF Cathodes for Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFCs)
Andanastuti Muchtar, Noorashrina A. Hamid, Norhamidi Muhamad, Wan Ramli Wan Daud,
2010
Advanced Materials Research, 139-141:141-144
CISI
29
Prediction of Mechanical Properties of Ti-6Al-4V using Neural Network,
D.Y. Pratama, Syarif
Junaidi and Ramli R. 2010
Advanced Materials
Research, 89-91, pp. 443-448.
30
The Impact damage response of plain woven natural
silk/epoxy laminated composite plates
A. U. Ude, A. K. Ariffin, K. Sopian, A. Arifin and C. H. Azhari
2010
International Journal of Engineering, Science and Technology, Vol 2, No 5, pp. 128-140.
Scopus
Makalah dalam jurnal tidak terindeks
BIL TAJUK ARTIKEL NAMA PENGARANG UTAMA TAHUN
DITERBITKAN NAMA JURNAL
1
Effect of EDM Wire Cutting on the Fatigue Life of the AZ61 Magnesium
Alloy. M.A.M. Daud, Z. Sajuri, J. Syarif and M.Z. Omar. 2010 Jurnal Mekanikal. 30: 68-76
2
Preliminary Study of Condition-Based Monitoring (CBM) on Automotive Gearbox using Ultrasonic Signals.
M.Z. Nuawi, Taib I. Mohamad, M. F. H. Hussin, S. Abdullah, R. Zulkifli, M.K. Zakaria,
2010
3
Effect of Compression on the Acoustic Absorption of Coir Fiber
Mohd Jailani Mohd Nor, Md. Ayub, Rozli Zulkifli, Nowshad Amin and Mohammad Hosseini Fouladi
2010
American Journal of Applied Sciences, Vol. 7(9), pp. 1285-1290.
4
Energy Attentuation Capability of Woven Natural Silk/Epoxy Composite Plates Subjected to Drop-Weight Impacts
Albert Uchenna Ude, Ahmad Kamal Ariffin, Kamauzzaman Sopian and Che Husna Azhari.
2010
ARP Journal of Engineering and Applied
