DAFTAR PUSTAKA
[1] Randall, Robert Bond.Vibration Based Condition Monitoring. West Sussex: John Willey & Sons Ltd. 2011.
[2] Andrew K.S. Jardine, Daming Lin, and Dragan Banjevic. A review on machinery diagnostics and prognostics implementing condition-based maintenance.Mechanical Systems and Signal Processing, 20(7):1483{1510, 2006.
[3] C. McLean and D. Wolfe, Intelligent wireless condition-based maintenance, In sensors, (2002)
[4] M. Ziani, M. Bennouna, M. Amamou and M. Barboucha, The Smart Sensor Design in Industrial Processes Apllications, In The 10th IEEE Meditterranean Electrotechnical Conference, (2000)
[5] Kirianaki,N. V., Yurish, S. Y., Shypak, N. O. and Deynega, V. P. (2002). Data acquisition and signal processing 1for smart sensors. John Wiley & Sons, Ltd. 1st edition
[6] A. Arsyad, Dr. –Ing. Naveed Ramzan, Smart Sensor : Industrial Instrumentation, Department of Chemical engineering, University of Engineering & Technology Lahore.
[7] B.F. Spencer Jr., M.E. Ruiz-Sandoval, N. Kurata. Smart Sensor Technology : Opportunities and Challenges.
[8] F.L.Lewis. Smart Environments : Technologies, Protocols, and Applications. New York: John Willey & Sons Ltd. 2005
[9] Moris,Alan S., Measurement and Instrumentation : Theory and Application, 525 B. Street, San Diego, California, USA, Elsevier, 2012.
[10] Analog Devices, Accelerometer 3 axis ADXL345, available on http://www.analog.com
[11] 8bit microcontroller with 128Kbytes In-System Programmable Flash, Datasheet ATmega128 Available on www.atmel.com
[13] USB to Serial Converter, FT232BL USB UART (USB – Serial) I.C. available on http://www.ftdichip.com
[14] Erwin Kreyzig. Advanced Engineering Mathematics 9th Edition. USA: John Willey & Sons Ltd. 2011.
[15] Daniel C.V. Condition Monitoring for Rotational Machinery.Open Access Dissertations and Theses.McMaster University,(2011)