Home (http://www.elsevi… ˃ Books & Journals (htt…
˃ Composites Part B: Engineering (http://www.journals.elsevier.com/composites-part-b-engineering/)
ISSN: 1359-8368
CompositesfiPartfiB:fiEngineering
An International Journal
Editor-in-ChieffiandfiEditorfiforfiNorthfiAmericafiandfiAsia:fiDavidfiHui
(http://www.journals.elsevier.com/composites-part-b-engineering/editorial-board/david-hui/#contact)
View full editorial board (http://www.journals.elsevier.com/composites-part-b-engineering/editorial-board/)
Supports Open Access
Guide for Authors
Submit Your Paper
MENU
(http://www.elsevier.co m/)
JournalfiMetrics
Source Normalized Impact per Paper (SNIP): 2.301ℹ
SCImago Journal Rank (SJR): 1.888ℹ
Impact Factor: 2.983ℹ
5-Year Impact Factor: 3.242ℹ
Stayfiup-to-date
Registerfiyourfiinterestsfiandfireceivefiemailfialertsfitailoredfitofiyourfineedsfi Clickfiherefitofisignfiupfi(http://www.elsevier.com/PreferenceCentre)
RelatedfiPublications
CementfiandfiConcretefiCompositesfi(http://www.elsevier.com/locate/inca/405892) fi CompositefiStructuresfi(http://www.elsevier.com/locate/inca/405928) fi
CompositesfiPartfiA:fiAppliedfiSciencefiandfiManufacturingfi(http://www.elsevier.com/locate/inca/30399) fi CompositesfiSciencefiandfiTechnologyfi(http://www.elsevier.com/locate/inca/405929) fi
Track Your Paper
Order Journal
Home
Journal Rankings
Journal Search Country Rankings
Country Search
Compare
Map Generator
Help
About Us
Display journal title
J o u r n a l S e a r c h
in Journal Title Search Exact phrase
C o m p o s i t e s P a r t B : E n g i n e e r i n g
Country: United Kingdom
Subject Area: Engineering | Materials Science
Subject Category:
Category Quartile (Q1 means highest values and Q4 lowest values)
1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014
Ceramics and Composites Industrial and Manufacturing Engineering Mechanical Engineering
Mechanics of Materials
Publisher: Elsevier Limited. Publication type: Journals. ISSN: 13598368
Coverage: 1996‐2015
H Index: 67
Scope:
The aim of Composites Part B: Engineering is to provide a balance between mechanics and materials science aspects, basic and [...]
I.D.G Ary Subagia
Authors Publication date Journal Volume Pages Publisher Description
Total citations
Scholar articles
Mechanical performance of multiscale basalt fiber–epoxy laminates containing tourmaline micro/nano particles
IDG Ary Subagia, Leonard D Tijing, Yonjig Kim, Cheol Sang Kim, Felipe P Vista IV, Ho Kyong Shon 2014/3/31
Composites Part B: Engineering 58
611617 Elsevier
Abstract In this study, the effect of different tourmaline (TM) micro/nano particle loading (ie, 0.5–2 wt%) on the tensile and flexural properties of a basalt fiberreinforced epoxy
composite laminate (BFRP) was investigated. The TM/basalt/epoxy laminates were
fabricated by impregnating woven basalt fibers into epoxy resin mixed with TM particles via vacuum assisted resin transfer molding. Tensile and flexural tests were performed according to ASTM standards. Fracture surfaces were characterized by scanning electron ...
Cited by 8
Mechanical performance of multiscale basalt fiber–epoxy laminates containing tourmaline micro/nano particles
IDGA Subagia, LD Tijing, Y Kim, CS Kim, FP Vista IV… Composites Part B: Engineering, 2014
Cited by 8 Related articles All 2 versions
Dates and citation counts are estimated and are determined automatically by a computer program.
2014 2015 2016
Scholar Edit Export
Submission author: Assignment title: Submission title: File name: File size: Page count: Word count: Character count: Submission date: Submission ID:
Digital Receipt
This receipt acknowledges that Turnitin received your paper. Below you will f ind the receipt inf ormation regarding your submission.
The f irst page of your submissions is displayed below.
I.d.g Ary Subagia Internasional
Mechanical perf ormance of multisc… r-epoxy_laminates_containing_tou… 1.89M
7 5,242 27,952
02-Feb-2016 04:03AM 626534199
Mechanical performance of
multiscale basalt fiber–epoxy
laminates containing tourmaline
micro/nano particles
by I.d.g Ary Subagia
FILE
TIME SUBMITTED 02-FEB-2016 04:03AM
SUBMISSION ID 626534199
WORD COUNT 5242
CHARACTER COUNT 27952
17
%SIMILARITY INDEX
7
%
INTERNET SOURCES
17
%
PUBLICATIONS
3
%
STUDENT PAPERS
1
1
%2
<
1
%3
<
1
%4
<
1
%5
<
1
%Mechanical performance of multiscale basalt fiber–epoxy laminates containing tourmaline micro/nano particles
ORIGINALITY REPORT
PRIMARY SOURCES
Submitted to Kyungsung University Student Paper
cdn.intechopen.com
Internet Source
Hossain, M., M. Chowdhury, M. Salam, N. Jahan, J. Malone, M. Hosur, S. Jeelani, and N. Bolden. "Enhanced mechanical properties of carbon fiber/epoxy composites by
incorporating XD-grade carbon nanotube", Journal of Composite Materials, 2014.
Publication
Bozkurt, Ömer Yavuz. "Hybridization effects on tensile and bending behavior of
aramid/basalt fiber reinforced epoxy
composites", Polymer Composites, 2015.
Publication
Hosur, Mahesh, Farhan Chowdhury, and Shaik Jeelani. "EFFECTS OF FABRICATION PROCESSES AND NANOCLAY INCLUSION ON THE PERFORMANCE OF WOVEN
6
<
1
%7
<
1
%8
<
1
%9
<
1
%10
<
1
%11
<
1
%12
<
1
%COMPUTATIONAL AND EXPERIMENTAL METHODS IN STRUCTURES, 2015.
Publication
www.researchgate.net
Internet Source
Submitted to Korea Institute of Science & Technology
Student Paper
repositorium.sdum.uminho.pt Internet Source
Dong Ruan. "Structure and properties of
regenerated cellulose/tourmaline nanocrystal composite films", Journal of Polymer Science Part B Polymer Physics, 02/01/2004
Publication
www.science.gov
Internet Source
Handbook of Polymer Nanocomposites Processing Performance and Application, 2015.
Publication
Amarjargal, Altangerel, Leonard D. Tijing, Ho Kyong Shon, Chan-Hee Park, and Cheol
Sang Kim. "Facile in-situ growth of highly monodispersed Ag nanoparticles on
13
<
1
%14
<
1
%15
<
1
%16
<
1
%17
<
1
%18
<
1
%Applied Surface Science, 2014.
Publication
TAE-HYUNG KIM; BO-SANG HWANG; HEE-YONG KANG; JI-HOON KIM; TIJING,
LEONARD D.; CHEOL SANG KIM and JAE KYOO LIM. "ENHANCED WETTING AND ADHESION OF POLYCARBONATE BY ULTRAVIOLET LIGHT SURFACE
TREATMENT", Digest Journal of
Nanomaterials & Biostructures (DJNB), 2013. Publication
McCrary-Dennis, M. C., and O. I. Okoli. "A review of multiscale composite
manufacturing and challenges", Journal of Reinforced Plastics and Composites, 2012.
Publication
central.oak.go.kr
Internet Source
Kazemi, Yasamin Kakroodi, Adel Ramezani . "Compatibilization efficiency in
post-consumer recycled
polyethylene/polypropylene blends: effect of ", Polymer Engineering and Science, Oct 2015 Issue
Publication
agogbio.org.au Internet Source
19
<
1
%20
<
1
%21
<
1
%22
<
1
%23
<
1
%Nanocomposites", Journal of Reinforced Plastics and Composites, 06/27/2008
Publication
Tijing, Leonard D., Chan-Hee Park, Seung-Ji Kang, Altangerel Amarjargal, Tae-Hyung Kim, Hem Raj Pant, Han Joo Kim, Dong Hwan Lee, and Cheol Sang Kim. "Improved mechanical properties of solution-cast
silicone film reinforced with electrospun polyurethane nanofiber containing carbon nanotubes", Applied Surface Science, 2013.
Publication
Jun Young Kim. "Influence of modified
carbon nanotube on physical properties and crystallization behavior of poly(ethylene
terephthalate) nanocomposite", Polymer Composites, 2009
Publication
Submitted to University of Arizona
Student Paper
Abdal-hay, Abdalla, Leonard D. Tijing, and Jae Kyoo Lim. "Characterization of the surface biocompatibility of an electrospun nylon 6/CaP nanofiber scaffold using
osteoblasts", Chemical Engineering Journal, 2013.
Publication
24
<
1
%25
<
1
%26
<
1
%27
<
1
%28
<
1
%fiber/epoxy composites", Composites Science and Technology, 200511
Publication
Advanced Structured Materials, 2016.
Publication
Lee, S.B.. "Processing and characterization of multi-scale hybrid composites reinforced with nanoscale carbon reinforcements and carbon fibers", Composites Part A, 201104
Publication
Abdal-hay, Abdalla, Faheem A. Sheikh, and Jae Kyoo Lim. "Air jet spinning of
hydroxyapatite/poly(lactic acid) hybrid nanocomposite membrane mats for bone tissue engineering", Colloids and Surfaces B Biointerfaces, 2013.
Publication
Ikegawa, Naoto Hamada, Hiroyuki Maekawa,. "Effect of compression process on void
behavior in structural resin transfer
molding.", Polymer Engineering and Science, April 15 1996 Issue
Publication
Monti, Marco, Maurizio Natali, Roberto Petrucci, Debora Puglia, Andrea Terenzi, Luca Valentini, and José Maria Kenny. "Composites Based on Nanocomposite
29
<
1
%30
<
1
%31
<
1
%32
<
1
%33
<
1
%34
<
1
%Publication
Jung, Hana, and Yonjig Kim. "Mode I fracture toughness of carbon-glass/epoxy interply
hybrid composites", Journal of Mechanical Science and Technology, 2015.
Publication
Handbook of Polymernanocomposites Processing Performance and Application, 2014.
Publication
www.thefreelibrary.com
Internet Source
Shen, Xiaohong, Xiangji Wu, Hailing Wei, and Weiping Du. "Study on Natural Minerals
Applying in Developing New Health Textiles", Journal of Minerals and Materials
Characterization and Engineering, 2015. Publication
Wei, B.. "Tensile behavior contrast of basalt and glass fibers after chemical treatment", Materials and Design, 201010
Publication
Xie, Jianfei, Lan Yao, Fujun Xu, Yishuang Li, Zhongde Shan, David Hui, and Yiping Qiu. "Fabrication and characterization of three-dimensional PMR polyimide composites reinforced with woven basalt fabric", Composites Part B Engineering, 2014.
35
<
1
%36
<
1
%37
<
1
%38
<
1
%39
<
1
%40
<
1
%www.ncbi.nlm.nih.gov
Internet Source
Zhou, Yuanxin, Mahesh Hosur, Zainuddin Shaik, and Shaik Jeelani. "Effect of Clay on Tensile, Flex and Fatigue Behavior of Carbon Fiber Reinforced Epoxy", Volume 8
Mechanics of Solids Structures and Fluids Vibration Acoustics and Wave Propagation, 2011.
Publication
W. C. Chang. "Magnetic properties
enhancement of nanocomposite Nd[sub 9.5]Fe[sub 81.5]B[sub 9] melt–spun ribbons by La and Cr substitutions", Journal of
Applied Physics, 1997 Publication
Lyashenko, T., N. Lerman, A. Wolf, H. Harel, and G. Marom. "Improved Mode II
delamination fracture toughness of
composite materials by selective placement of protein-surface treated CNT", Composites Science and Technology, 2013.
Publication
Righetti, Luca, Marco Corradi, and Antonio Borri. "Basalt FRP Spike Repairing of Wood Beams", Fibers, 2015.
Publication
eprints.whiterose.ac.uk
41
<
1
%42
<
1
%43
<
1
%44
<
1
%45
<
1
%toxsci.oxfordjournals.org Internet Source
Amarjargal, Altangerel, Leonard D. Tijing, Michael Tom G. Ruelo, Chan-Hee Park, Hem Raj Pant, Felipe P. Vista IV, Dong Hwan Lee, and Cheol Sang Kim. "Inactivation of bacteria in batch suspension by fluidized ceramic
tourmaline nanoparticles under oscillating radio frequency electric fields", Ceramics International, 2013.
Publication
Domun, N., H. Hadavinia, T. Zhang, T. Sainsbury, G. H. Liaghat, and S. Vahid. "Improving the fracture toughness and the strength of epoxy using nanomaterials – a review of the current status", Nanoscale, 2015.
Publication
Kim, M.T.. "Effects of silane-modified carbon nanotubes on flexural and fracture behaviors of carbon nanotube-modified epoxy/basalt composites", Composites Part B, 201207 Publication
Carbonell-Verdú, A., D. García-García, A. Jordá, M.D. Samper, and R. Balart.
46
<
1
%47
<
1
%48
<
1
%49
<
1
%50
<
1
%Publication
Tijing, L.D.. "Mitigation of scaling in heat exchangers by physical water treatment
using zinc and tourmaline", Applied Thermal Engineering, 201108
Publication
Lee, S.M.. "Novel silk/poly(butylene
succinate) biocomposites: the effect of short fibre content on their mechanical and thermal properties", Composites Science and
Technology, 200503
Publication
Li, Jingwen, Zhixiong Wu, Chuanjun Huang, and Laifeng Li. "Multiscale carbon nanotube-woven glass fiber reinforced cyanate
ester/epoxy composites for enhanced mechanical and thermal properties",
Composites Science and Technology, 2014.
Publication
Diez-Pascual, A.M.. "High-performance
nanocomposites based on polyetherketones", Progress in Materials Science, 201209
Publication
Díez-Pascual, Ana M., Mohammed Naffakh, Carlos Marco, Marián A. Gómez-Fatou, and Gary J. Ellis. "Multiscale fiber-reinforced thermoplastic composites incorporating carbon nanotubes: A review", Current
51
<
1
%52
<
1
%53
<
1
%54
<
1
%55
<
1
%2014.
Publication
Dong, Chensong, and Ian J. Davies. "Flexural strength of bidirectional hybrid epoxy
composites reinforced by E glass and T700S carbon fibres", Composites Part B
Engineering, 2015.
Publication
Hong Hu, , and Qing He. "Knitting of basalt filament yarn", Textile Research Journal, 2011.
Publication
Chowdhury, F.H.. "Studies on the flexural and thermomechanical properties of woven
carbon/nanoclay-epoxy laminates", Materials Science & Engineering A, 20060415
Publication
Yang, J.P.. "Cryogenic mechanical behaviors of MMT/epoxy nanocomposites", Composites Science and Technology, 200711
Publication
Hu, Jianbao, Shaoming Dong, Xiangyu Zhang, Haijun Zhou, Bin Wu, Zhen Wang, Ping He, and Le Gao. "Process and
mechanical properties of carbon/carbon– silicon carbide composite reinforced with
56
<
1
%57
<
1
%58
<
1
%59
<
1
%60
<
1
%61
<
1
%62
<
1
%Publication
Cui, X.. "Effects of zonal perturbations of sea surface temperature on tropical equilibrium states: A cloud-resolving modeling study", Progress in Natural Science, 20080410 Publication
Sue, H.J.. "Effect of rubber particle clustering in composite toughening-model systems
study", Composites, 199309
Publication
archive.org
Internet Source
www.avs-ased.org
Internet Source
Gao, Yang, Gaind P Pandey, James Turner, Charles R Westgate, and Bahgat Sammakia. "Chemical vapor-deposited carbon nanofibers on carbon fabric for supercapacitor electrode applications", Nanoscale Research Letters, 2012.
Publication
Colombo, C.. "Static and fatigue characterisation of new basalt fibre reinforced composites", Composite Structures, 201202
Publication
63
<
1
%64
<
1
%65
<
1
%66
<
1
%67
<
1
%68
<
1
%69
<
1
%repair", Biomedical Materials, 08/2010
Publication
www.mdpi.com
Internet Source
Wei, B.. "Surface modification and
characterization of basalt fibers with hybrid sizings", Composites Part A, 201101
Publication
Yuan, L.. "Fibre reinforced organic
rectorite/unsaturated polyester composites", Composites Science and Technology, 200709 Publication
Smita Mohanty. "Mechanical, Thermal and Viscoelastic Behavior of Nylon 6/Clay
Nanocomposites with Cotreated Montmorillonites", Polymer-Plastics Technology and Engineering, 2007
Publication
Conference Proceedings of the Society for Experimental Mechanics Series, 2014.
Publication
Kim, Man Tae, Kyong Yop Rhee, Hyun Ju Kim, and Dong Ho Jung. "A study on the fracture toughness of seawater-absorbed carbon nanotube/epoxy/basalt composites", Carbon letters, 2013.
Publication
70
<
1
%71
<
1
%72
<
1
%and Cheol Sang Kim. "Composite electrospun fly ash/polyurethane fibers for absorption of volatile organic compounds from air",
Chemical Engineering Journal, 2013.
Publication
Sarasini, Fabrizio, Jacopo Tirillò, Marco Valente, Teodoro Valente, Salvatore Cioffi, Salvatore Iannace, and Luigi Sorrentino. "Effect of basalt fiber hybridization on the impact behavior under low impact velocity of glass/basalt woven fabric/epoxy resin
composites", Composites Part A Applied Science and Manufacturing, 2013.
Publication
Phong, Nguyen Tien, Mohamed H. Gabr, Kazuya Okubo, Bui Chuong, and Toru Fujii. "Improvement in the mechanical
performances of carbon fiber/epoxy
composite with addition of nano-(Polyvinyl alcohol) fibers", Composite Structures, 2013.
Publication
Zulfli, N. H. M., A. A. Bakar, and W. S. Chow. "Mechanical and thermal properties
improvement of nano calcium carbonate-filled epoxy/glass fiber composite laminates", High Performance Polymers, 2014.
EXCLUDE QUOTES OFF
EXCLUDE
BIBLIOGRAPHY ON