Tutorial Install Ubuntu Server 11.04
+ Webmin/Virtualmin
Tutorial Ver0 – 2011, oleh : Imam Suharjo
Berikut Turorial Instalasi Server web pada Ubuntu 11.04 dengan Webmin dan Virtualmin.
Tidak ada yang sempurna didunia ini termasuk tutorial ini. Tiutorial ini adalag GRATIS. Namun kami mohon jika rekan anda ingin medapatkan tutorial ini diminta dwoload langsung memalui web IMM.WEB.ID. Dukungan (support), Kritik, saran dan hal lain yang sekiranya anda atau kami butuhkan
bisa Kontak via Email. Imam [at] imm.web.id.
Pengantar
Langkah Umum :1. Instalasi Ubuntu Server 11.04 2. Instalasi Webmin
3. Instalasi Virtualmin
4. Install Virtualmin Framed Theme (opsional) 5. Menambahkan Domain baru
1. Instalasi Ubuntu Server
Instalasi Ubuntu Server seperti sudah jelas. Hanya sebagai catatan saya beberapa yang perlu diperhatikan antara lain :
1. Setting IP Publik yang anda miliki
2. Jangan lupa Setting DNS dan Gateway yang benar.
3. Jika setting IP sudah benar dan Instalasi Sudah selesai, Server bisa di tempatkan di Public Network /DMZ yang memungkinkan Server bisa diakses darimana saja.
2 | T u t o r i a l R e v 0 - 2 0 1 1 U b u n t u S e r v e r 1 1 . 0 4 + W e b m i n + V i r t u a l m i n 2. Instalasi Webmin
Langkah Instalasi webmin :
1. Lebih baik jika anda mengkases Server dengan cara “remote” misal dengan SSH /Putty Download putty : http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html 2. Login ke server dengan SSH
3. Download dengan wget , copy paste URL paket webmin yang sesuai bisa dilihat di webmin.com/download.html
4. Jika anda menggunakan Ubuntu/deban, cara install ada disini webmin.com/deb.html Berikut Cara Install webmin (versi 1.570 pada Ubuntu 11.04):
1. wget http://prdownloads.sourceforge.net/webadmin/webmin-1.570_all.deb 2. sudo dpkg --install webmin_1.570_all.deb
3. sudo apt-get install perl libnet-ssleay-perl openssl libauthen-pam-perl libpam-runtime libio-pty-perl apt-show-versions python
4. Jika masih error : sudo apt-get –f install
Jika sukses pada bagian akhir instalasi akan berbunyi : Setting up webmin (1.570) ...
apt-get -f instal
Webmin install complete. You can now login to https://mailserver:10000/ as root with your root password, or as any user who can use sudo to run commands as root.
Anda sudah bisa Login ke Server ketik IP:10000 di URL, misal 192.168.0.1:10000 Login dengan User di Ubuntu
3. Proses Instalasi Virtualmin
Virtualmin adalah salah satu web Control panel yang open Source dan Gratis. Virtualmin memiliki fungsi mirip dengan Cpanel. Virtualmin bisa diinstall secara terpisah atau tergabung dengan webmin. Selain versi free ada juga Virtaulmin Pro (tidak Gratis).
Tutorial ini saya asumsikan sudah ada webmin terpasang di Ubuntu Server anda. 1. Install Modul Virtualmin
Akses dari menu Webmin Webmin Configuratin webmin Module
Install Modul ada 2 yaitu : Virtualmin dan Virtualmin Theme : Bisa diambil disini : Buka : http://webmin.com/vdownload.html
http://download.webmin.com/download/virtualmin/virtual-server-3.88.gpl.wbm.gz http://download.webmin.com/download/virtualmin/virtual-server-theme-8.1.wbt.gz
4 | T u t o r i a l R e v 0 - 2 0 1 1 U b u n t u S e r v e r 1 1 . 0 4 + W e b m i n + V i r t u a l m i n Install masing-masing modul
2. Setting Theme Virtualmin :
3. Post Installatin Wizard
Digunakan untuk melakukan pengecekann apakah server kita sudah Siap sebagai Webserver menurut Virtualmin. Perlu kesabaran untuk proses ini, pastikan semua konfigurasi sukses.
JIKA ada Error coba RE-Check :
CEK STATUS 1 :
The status of your system is being checked to ensure that all enabled features are available, that the mail server is properly configured, and that quotas are active ..
Your system has 467.71 MB of memory, which is at or above the Virtualmin recommended limit of 256 MB.
Virtualmin is configured to setup DNS zones, but this system is not setup to use itself as a DNS server. Either add 127.0.0.1 to the list of DNS servers, or turn off the BIND feature on the module config page. It appears that DHCP is being used to dynamically configure your network interfaces, which can cause the DNS servers to be set based on settings provided by the DHCP server. Using a static IP address is strongly recommended with Virtualmin.
.. your system is not ready for use by Virtualmin.
8 | T u t o r i a l R e v 0 - 2 0 1 1 U b u n t u S e r v e r 1 1 . 0 4 + W e b m i n + V i r t u a l m i n
CEK STATUS 2 :
Pesan error :
The status of your system is being checked to ensure that all enabled features are available, that the mail server is properly configured, and that quotas are active ..
Your system has 467.71 MB of memory, which is at or above the Virtualmin recommended limit of 256 MB. BIND DNS server is installed, and the system is configured to use it.
Detected mail server Postfix.
A problem was found with your Postfix virtual maps : No map sources were found in the Postfix configuration
.. your system is not ready for use by Virtualmin.
CEK STATUS 3 :
The status of your system is being checked to ensure that all enabled features are available, that the mail server is properly configured, and that quotas are active ..
Your system has 467.71 MB of memory, which is at or above the Virtualmin recommended limit of 256 MB.
BIND DNS server is installed, and the system is configured to use it.
Your Postfix configuration is missing the system's mail hostname svr3.umbyogya.com from the mydestination line, which will cause mail to bounce.
.. your system is not ready for use by Virtualmin.
SOLUSI 3
CEK STATUS 4 :
The status of your system is being checked to ensure that all enabled features are available, that the mail server is properly configured, and that quotas are active ..
Your system has 467.71 MB of memory, which is at or above the Virtualmin recommended limit of 256 MB. BIND DNS server is installed, and the system is configured to use it.
Mail server Postfix is installed and configured.
Suexec is enabled in the default template, but the Apache module mod_suexec is not installed or not enabled.
your system is not ready for use by Virtualmin.
10 | T u t o r i a l R e v 0 - 2 0 1 1 U b u n t u S e r v e r 1 1 . 0 4 + W e b m i n + V i r t u a l m i n
CEK STATUS 5 :
The status of your system is being checked to ensure that all enabled features are available, that the mail server is properly configured, and that quotas are active ..
Your system has 467.71 MB of memory, which is at or above the Virtualmin recommended limit of 256 MB. BIND DNS server is installed, and the system is configured to use it.
Mail server Postfix is installed and configured.
The Apache module mod_actions is either not installed or not enabled. .. your system is not ready for use by Virtualmin.
SOLUSI 5 :
CEK STATUS 6 :
The status of your system is being checked to ensure that all enabled features are available, that the mail server is properly configured, and that quotas are active ..
Your system has 467.71 MB of memory, which is at or above the Virtualmin recommended limit of 256 MB. BIND DNS server is installed, and the system is configured to use it.
Mail server Postfix is installed and configured.
Apache configuration file /etc/apache2/mods-available/php5.conf contains SetHandler lines that PHP from running with domain owner permissions. These lines must be removed.
.. your system is not ready for use by Virtualmin.
