5.2 Messages from the minitoc package
5.2.3 Error messages
E0001
! Package minitoc Error: E0001
(minitoc) But \part is undefined.
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
\mtcfixglossary not usable
There are no adequate sectionning command available to use the\mtcfixglossarymacro;
even\partis undefined. Verify your document class.
E0002
! Package minitoc Error: E0002
(minitoc) But \part is undefined.
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
\mtcfixindex not usable
There are no adequate sectionning command available to use the \mtcfixindex macro;
even\partis undefined. Verify your document class.
E0003
! Package minitoc Error: E0003
(minitoc) Imbrication of mtchideinmainlof environments.
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
The hiding in main LoF could be incorrect
Some mtchideinmainlof environments are incorrectly imbricated (overlapping), so the hiding in the main list of figures will be strange.
E0004
! Package minitoc Error: E0004
(minitoc) Imbrication of mtchideinmainlot environments.
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
The hiding in main LoT could be incorrect
Some mtchideinmainlot environments are incorrectly imbricated (overlapping), so the hiding in the main list of tables will be strange.
E0005
! Package minitoc Error: E0005
(minitoc) Imbrication of mtchideinmaintoc environments.
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
The hiding in main ToC could be incorrect
Some mtchideinmaintoc environments are incorrectly imbricated (overlapping), so the hiding in the main table of contents will be strange.
E0006
! Package minitoc Error: E0006
(minitoc) LANGUAGE is not a known language, (minitoc) LANGUAGE.mld not found.
(minitoc) Command ignored.
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
See the minitoc documentation.
Correct the source using a valid language name.
Press RETURN
The \mtcselectlanguage macro has attempted to load the LANGUAGE.mld minitoc language definition file, but has not found it. First, verify the name of the language (likely to be misspelt), then check if your installation contains allthe many distributed.mld files of theminitocpackage, at the right place. If it is a local .mldfile, it should be installed in the right place (in a local hierarchy) or be in the working directory.
E0007
! Package minitoc Error: E0007
(minitoc) LANGUAGE is not a known minitoc (minitoc) language object file (.mlo), (minitoc) LANGUAGE.mlo not found.
(minitoc) Command ignored.
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
See the minitoc documentation.
Correct the source using a valid language name.
Press RETURN
The \mtcselectlanguage macro has attempted to load indirectly the LANGUAGE.mlo minitoc language object file, but has not found it. First, verify the name of the language (likely to be misspelt), then check if your installation containsallthe many distributed.mlo files of theminitocpackage, at the right place. If it is a local.mlofile, it should be installed in the right place (in a local hierarchy) or be in the working directory.
E0008
! Package minitoc Error: E0008
(minitoc) \mtcsetdepth attempts to use (minitoc) an undefined counter (ARG1depth).
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
Correct the source code.
Type <return> and rerun LaTeX
You are trying to set the depth for an inexistent or undefined type of mini-table. Verify the type given and the document class, and the loaded packages.
E0009
! Package minitoc Error: E0009
(minitoc) \mtcsetdepth has a wrong first argument
(minitoc) (ARG1).
(minitoc) It should be a mini-table type (minitoc) (parttoc...sectlot).
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
Correct the source code.
Type <return> and rerun LaTeX
The first argument of the \mtcsetdepth macro is incorrect. It should be a type of mini-table (parttoc, . . . ,sectlot).
E0010
! Package minitoc Error: E0010
(minitoc) \mtcsetdepth: Illegal type of table (ARG1).
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
Correct the source code.
Type <return> and rerun LaTeX
The first argument of the\mtcsetdepthmacro is incorrect. It should be a mini-table type (parttoc, . . . ,sectlot).
E0011
! Package minitoc Error: E0011
(minitoc) \mtcsetfeature has a wrong first argument
(minitoc) (ARG1).
(minitoc) It should be a mini-table type (minitoc) (parttoc...sectlot).
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
Correct the source code.
Type <return> and rerun LaTeX
The first argument of the \mtcsetfeature macro is incorrect. It should be a mini-table type (parttoc, . . . ,sectlot).
E0012
! Package minitoc Error: E0012
(minitoc) \mtcsetfeature has a wrong second argument
(minitoc) (ARG2).
(minitoc) It should be a feature param
(minitoc) (before, after, open, close, pagestyle).
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
Correct the source code.
Type <return> and rerun LaTeX
The second argument of the \mtcsetfeature macro is incorrect. It should be before, after,open,close, orthispagestyle.
E0013
! Package minitoc Error: E0013
(minitoc) \mtcsetfont has a wrong first argument
(minitoc) (arg1).
(minitoc) It should be a mini-table type (minitoc) (parttoc...sectlot).
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
Correct the source code.
Type <return> and rerun LaTeX
The first argument of \mtcsetfont is incorrect; it should be the type of a mini-table (parttoc. . . ,sectlot).
E0014
! Package minitoc Error: E0014
(minitoc) \mtcsetfont has a wrong second argument
(minitoc) (ARG2).
(minitoc) It should be a sectionning level (minitoc) (part...subparagraph) or * . See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
Correct the source code.
Type <return> and rerun LaTeX
The second argument of \mtcsetfontis incorrect; it should be a sectionning level (i.e., a sectionning command without its backslash), likepart. . . ,subparagraph.
E0015
! Package minitoc Error: E0015
(minitoc) \mtcsetformat has a wrong first argument
(minitoc) (ARG1).
(minitoc) It should be a mini-table type (minitoc) (parttoc...sectlot).
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
Correct the source code.
Type <return> and rerun LaTeX
The first argument of a\mtcsetformatmacro is incorrect. It should be a mini-table type (parttoc, . . . ,sectlot).
E0016
! Package minitoc Error: E0016
(minitoc) \mtcsetformat has a wrong second argument
(minitoc) (ARG2).
(minitoc) It should be a formatting param choosen from:
(minitoc) pagenumwidth, tocrightmargin, dotinterval.
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
Correct the source code.
Type <return> and rerun LaTeX
The second argument of the \mtcsetformat macro is wrong. It should be one of the following keywords: pagenumwidth,tocrightmargin, ordotinterval.
E0017
! Package minitoc Error: E0017
(minitoc) \mtcsetpagenumbers has a wrong first
(minitoc) argument (ARG1)..
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
It should be a mini-table type
(minitoc) (parttoc...sectlot) Correct the source code.
Type <return> and rerun LaTeX
The first argument of the \mtcsetpagenumbers macro must be a type of minitable (parttoc, . . . ,sectlot).
E0018
! Package minitoc Error: E0018
(minitoc) \mtcsetpagenumbers has a wrong second
(minitoc) argument (ARG2).
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
It should be a boolean value (0/1, yes/no, on/off, ...) Correct the source code.
Type <return> and rerun LaTeX
The second argument of the \mtcsetpagenumbers must be a keyword chosen in the following lists4 :
• on,ON,yes,YES,y,Y,true,TRUE,t,T,vrai,VRAI,v,V,oui,OUI,o,O,+, and1;
• off,OFF,no,NO,n,N,false,FALSE,faux,FAUX,f,F,non,NON,-, and0.
E0019
! Package minitoc Error: E0019
(minitoc) \mtcsetrules has a wrong first argument
(minitoc) (ARG1).
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
It should be a mini-table type
(minitoc) (parttoc...sectlot) Correct the source code.
Type <return> and rerun LaTeX
The first argument of the \mtcsetrules is incorrect. It should be a mini-table type (parttoc, . . . ,sectlot).
E0020
! Package minitoc Error: E0020
(minitoc) \mtcsetrules has a wrong second argument
(minitoc) (ARG2).
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
It should be a boolean value (0/1, yes/no, on/off, ...) Correct the source code.
Type <return> and rerun LaTeX
The second argument of the \mtcsetrules must be a keyword chosen in the following lists4 :
• on,ON,yes,YES,y,Y,true,TRUE,t,T,vrai,VRAI,v,V,oui,OUI,o,O,+, and1;
• off,OFF,no,NO,n,N,false,FALSE,faux,FAUX,f,F,non,NON,-, and0.
4 Oandoare the letterO,0is the zero digit.
E0021
! Package minitoc Error: E0021
(minitoc) \mtcsettitle has a wrong first argument
(minitoc) (ARG1).
(minitoc) It should be a mini-table type (minitoc) (parttoc...sectlot).
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
Correct the source code.
Type <return> and rerun LaTeX
The first argument of a \mtcsettitle macro is incorrect; it should be a mini-table type (parttoc, . . . ,sectlot).
E0022
! Package minitoc Error: E0022
(minitoc) \mtcsettitlefont has a wrong first argument
(minitoc) (ARG1).
(minitoc) It should be a mini-table type (minitoc) (parttoc...sectlot).
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
Correct the source code.
Type <return> and rerun LaTeX
The first argument of the \mtcsettitlefont must be a mini-table type. You likely misspelt it.
E0023
! Package minitoc Error: E0023
(minitoc) The macro \mtcsetfeature has incompatible (minitoc) first (ARG1) and second (ARG2) arguments.
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
Correct the source code.
Type <return> and rerun LaTeX
The first and second arguments of the \mtcsetfeature macro are incompatible. You should verify them.
E0024
! Package minitoc Error: E0024
(minitoc) The macro \mtcsetfont has incompatible (minitoc) first (ARG1) and second (ARG2) arguments.
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
Correct the source code.
Type <return> and rerun LaTeX
The \mtcsetfont macro takes a mini-table type as first argument, a sectionning level as second argument (or a star), and a sequence of font commands as third argument. The second argument must have a lower level than the first one (i.e., it is meaningless to specify the font for the chapter level entries for a minitoc or a secttoc).
E0025
! Package minitoc Error: E0025
(minitoc) The macro \mtcsetformat has incompatible (minitoc) first (ARG1) and second (ARG2) arguments.
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
Correct the source code.
Type <return> and rerun LaTeX
The first and second arguments of a\mtcsetformatmacro areincompatible. One is likely to be misspelt.
E0026
! Package minitoc Error: E0026
(minitoc) The optional argument of \mtcfixglossary
(minitoc) is wrong.
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
It must be omitted (chapter), or be part, chapter or section
The optional argument of the \mtcfixglossarymacro is incorrect: it should be omitted (then it defaults tochapter) or bepart,chapter, orsection.
E0027
! Package minitoc Error: E0027
(minitoc) The optional argument of \mtcfixindex
(minitoc) is wrong.
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
It must be omitted (chapter), or be part, chapter or section
The optional argument of the\mtcfixindexmacro is incorrect: it should be omitted (then it defaults tochapter) or bepart,chapter, orsection.
E0028
! Package minitoc Error: E0028
(minitoc) Unable to patch the memoir class.
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
So it remains incompatible. Sorry.
Your version of thememoirclass is reallyincompatiblewith theminitocpackage and cannot be automatically patched. Please update thememoirclass and/or theminitocpackage from
the CTAN archives or a recent distribution.
E0029
! Package minitoc Error: E0029
(minitoc) Unbalanced mtchideinmainlof environment.
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
The hiding in main LoF could be incorrect
Amtchideinmainlofenvironment is unbalanced, so the hiding in the main list of figures could be incorrect.
E0030
! Package minitoc Error: E0030
(minitoc) Unbalanced mtchideinmainlot environment.
See the minitoc package documentation for explanation.
Type H <return> for immediate help.
? h
The hiding in main LoT could be incorrect