7-1 Introduction
The type of costing method used to value inventory is the central inventory cost- ing topic, because the method used can have a significant impact on the level of reported income. According to Statement 4 in Chapter 4 of Accounting Research Bulletin43, one can derive the cost of inventory using a variety of cost flow as- sumptions, as long as the method chosen is the one most clearly reflecting periodic income. There are several costing methods from which to choose. In this chapter, we cover the reasons for using the first-in, first-out (FIFO), last-in, first-out (LIFO), dollar-value LIFO, link-chain, and weighted-average methods and also provide examples for how they are calculated. There is also a brief discussion of the spe- cific identification method, which is rarely used.
7-2 First-In, First-Out (FIFO) Inventory Valuation
A computer manufacturer knows that the component parts it purchases are subject to extremely rapid rates of obsolescence, sometimes rendering a part worthless in a month or two. Accordingly, it will be sure to use up the oldest items in stock first, rather than running the risk of scrapping them a short time into the future. For this type of environment, the first-in, first-out (FIFO) method is the ideal way to deal with the flow of costs. This method assumes that the oldest parts in stock are al- ways used first, which means that their associated old costs are used first, as well.
The concept is best illustrated with an example, which we show in Exhibit 7-1.
In the first row, we create a single layer of inventory that results in 50 units of in- ventory, at a per-unit cost of $10. So far, the extended cost of the inventory is the same as we saw under the LIFO, but that will change as we proceed to the second row of data. In this row, we have monthly inventory usage of 350 units, which FIFO
1This chapter is adapted with permission from pp. 45–51 of Bragg, GAAP Implementation Guide, John Wiley & Sons, 2004.
assumes will use the entire stock of 50 inventory units that were left over at the end of the preceding month, as well as 300 units that were purchased in the current month. This wipes out the first layer of inventory, leaving us with a single new layer that is composed of 700 units at a cost of $9.58 per unit. In the third row, there is 400 units of usage, which again comes from the first inventory layer, shrinking it down to just 300 units. However, because extra stock was purchased in the same period, we now have an extra inventory layer that consists of 250 units, at a cost of $10.65 per unit. The rest of the exhibit proceeds using the same FIFO layering assumptions.
There are several factors to consider before implementing a FIFO costing sys- tem. They are as follows:
Fewer inventory layers. The FIFO system generally results in fewer layers of inventory costs in the inventory database. For example, the LIFO model shown in Exhibit 7-2 contains four layers of costing data, whereas the FIFO model shown in Exhibit 7-1, which used exactly the same data, resulted in no more than two inventory layers. This conclusion generally holds true, because a LIFO system will leave some layers of costs completely untouched for long time pe- riods, if inventory levels do not drop, whereas a FIFO system will continually clear out old layers of costs, so that multiple costing layers do not have a chance to accumulate.
Reduces taxes payable in periods of declining costs. Although it is unusual to see declining inventory costs, it sometimes occurs in industries where there is either ferocious price competition among suppliers or extremely high rates of innovation that in turn lead to cost reductions. In such cases, using the earliest costs first will result in the immediate recognition of the highest possible ex- pense, which reduces the reported profit level, and therefore reduces taxes payable.
Shows higher profits in periods of rising costs. Because it charges off the ear- liest costs first, any recent increase in costs will be stored in inventory, rather than being immediately recognized. This will result in higher levels of reported profits, although the attendant income tax liability will also be higher.
Less risk of outdated costs in inventory. Because old costs are used first in a FIFO system, there is no way for old and outdated costs to accumulate in in- ventory. This prevents the management group from having to worry about the adverse impact of inventory reductions on reported levels of profit, either with excessively high or low charges to the cost of goods sold. This avoids the dilemma noted earlier for LIFO, where just-in-time systems may not be imple- mented if the result will be a dramatically different cost of goods sold.
In short, the FIFO cost layering system tends to result in the storage of the most recently incurred costs in inventory and higher levels of reported profits. It is most useful for those companies whose main concern is reporting high profits rather than reducing income taxes.
111
Exhibit 7-1FIFO Valuation Example FIFO Costing Part Number BK0043 Column 1Column 2Column 3Column 4Column 5Column 6Column 7Column 8Column 9 NetCost of Cost of Cost of Extended DateQuantityCost perMonthlyInventory1st Inventory2nd Inventory3rd InventoryInventory PurchasedPurchasedUnitUsageRemainingLayerLayerLayerCost 05/03/03500$10.0045050(50 ×$10.00)——$500 06/04/031,000$9.58350700(700 ×$9.58)——$6,706 07/11/03250$10.65400550(300 ×$9.58)(250 ×$10.65)—$5,537 08/01/03475$10.25350675(200 ×$10.65)(475 ×$10.25)—$6,999 08/30/03375$10.40400650(275 ×$10.40)(375 ×$10.40)—$6,760 09/09/03850$9.50700800(800 ×$9.50)——$7,600 12/12/03700$9.75900600(600 ×$9.75)——$5,850 02/08/04650$9.85800450(450 ×$9.85)——$4,433 05/07/04200$10.800650(450 ×$9.85)(200 ×$10.80)—$6,593 09/23/04600$9.85750500(500 ×$9.85)——$4,925
7-3 Last-In, First-Out (LIFO) Inventory Valuation
In a supermarket, the shelves are stocked several rows deep with products. A shop- per will walk by and pick products from the front row. If the stocking person is lazy, he or she will then add products to the front row locations from which products were just taken, rather than shifting the oldest products to the front row and putting new ones in the back. This concept of always taking the newest products first is called last-in, first-out (LIFO).
The following factors must be considered before implementing a LIFO system:
Many layers. The LIFO cost flow approach can result in a large number of in- ventory layers, as shown in Exhibit 7-2. Although this is not important when a computerized accounting system that will automatically track a large number of such layers is used, it can be burdensome if the cost layers are manually tracked.
Alters the inventory valuation. If there are significant changes in product costs over time, the earliest inventory layers may contain costs that are wildly differ- ent from market conditions in the current period, which could result in the recog- nition of unusually high or low costs if these cost layers are ever accessed. Also, LIFO costs can never be reduced to the lower of cost or market (see Chapter 8), thereby perpetuating any unusually high inventory values in the various inven- tory layers.
Interferes with the implementation of just-in-time systems. As noted in the pre- vious list item, clearing out the final cost layers of a LIFO system can result in unusual cost of goods sold figures. If these results will cause a significant skew- ing of reported profitability, company management may be put in the unusual position of opposing the implementation of advanced manufacturing concepts, such as just-in-time, that reduce or eliminate inventory levels.
Reduces taxes payable in periods of rising costs. In an inflationary environ- ment, costs that are charged off to the cost of goods sold as soon as they are in- curred will result in a higher cost of goods sold and a lower level of profitability, which in turn results in a lower tax liability. This is the principle reason why LIFO is used by most companies.
Requires consistent usage for all reporting. Under IRS rules (see Chapter 13), if a company uses LIFO to value its inventory for tax reporting purposes, then it must do the same for its external financial reports. The result of this rule is that a company cannot report lower earnings for tax purposes and higher earnings for all other purposes by using an alternative inventory valuation method. How- ever, it is still possible to mention what profits would have been if some other method have been used, but only in the form of a footnote appended to the fi- nancial statements. If financial reports are only generated for internal manage- ment consumption, then any valuation method may be used.
In short, LIFO is used primarily for reducing a company’s income tax liability.
This single focus can cause problems, such as too many cost layers, an excessively
113
Exhibit 7-2LIFO Valuation Example LIFO Costing Part Number BK0043 Column 1Column 2Column 3Column 4Column 5Column 6Column 7Column 8Column 9Column 10 NetCost ofCost ofCost ofCost ofExtended DateQuantityCost perMonthlyInventory1st Inventory2nd Inventory3rd Inventory4th InventoryInventory PurchasedPurchasedUnitUsageRemainingLayerLayerLayerLayerCost 05/03/03500$10.0045050(50 ×$10.00)———$500 06/04/031,000$9.58350700(50 ×$10.00)(650 ×$9.58)——$6,727 07/11/03250$10.65400550(50 ×$10.00)(500 ×$9.58)——$5,290 08/01/03475$10.25350675(50 ×$10.00)(500 ×$9.58)(125 ×$10.25)—$6,571 08/30/03375$10.40400650(50 ×$10.00)(500 ×$9.58)(100 ×$10.25)—$6,315 09/09/03850$9.50700800(50 ×$10.00)(500 ×$9.58)(100 ×$10.25)(150 ×$9.50)$7,740 12/12/03700$9.75900600(50 ×$10.00)(500 ×$9.58)(50 ×$9.58)—$5,769 02/08/04650$9.85800450(50 ×$10.00)(400 ×$9.58)——$4,332 05/07/04200$10.800650(50 ×$10.00)(400 ×$9.58)(200 ×$10.80)—$6,492 09/23/04600$9.85750500(50 ×$10.00)(400 ×$9.58)(50 ×$9.85)—$4,825
low inventory valuation, and a fear of inventory reductions because of the recog- nition of inventory cost layers that may contain very low per-unit costs, which will result in high levels of recognized profit and therefore a higher tax liability. Given these issues, one should carefully consider the utility of tax avoidance before im- plementing a LIFO cost layering system.
As an example, The Magic Pen Company has made 10 purchases, which are itemized in Exhibit 7-2. In the exhibit, the company has purchased 500 units of a product with part number BK0043 on May 3, 2003 (as noted in the first row of data), and used 450 units during that month, leaving the company with 50 units.
These 50 units were all purchased at a cost of $10 each, so they are itemized in Column 6 as the first layer of inventory costs for this product. In the next row of data, an additional 1,000 units were bought on June 4, 2003, of which only 350 units were used. This leaves an additional 650 units at a purchase price of $9.58, which are placed in the second inventory layer, as noted on Column 7. In the third row, there is a net decrease in the amount of inventory, so this reduction comes out of the second (or last) inventory layer in Column 7; the earliest layer, as described in Column 6, remains untouched, because it was the first layer of costs added and will not be used until all other inventory has been eliminated. The exhibit contin- ues through seven more transactions, at one point increasing to four layers of in- ventory costs.
7-4 Dollar-Value LIFO Inventory Valuation
This method computes a conversion price index for the year-end inventory in comparison to the base year cost. This index is computed separately for each com- pany business unit. The conversion price index can be computed with the double- extension method. Under this approach, the total extended cost of the inventory at both base year prices and the most recent prices are calculated. Then the total in- ventory cost at the most recent prices is divided by the total inventory cost at base year prices, resulting in a conversion price percentage, or index. The index repre- sents the change in overall prices between the current year and the base year. This index must be computed and retained for each year in which the LIFO method is used.
There are two problems with the double-extension method. First, it requires a massive volume of calculations if there are many items in inventory. Second, tax regulations require that any new item added to inventory, no matter how many years after the establishment of the base year, have a base year cost included in the LIFO database for purposes of calculating the index. This base year cost is sup- posed to be the one in existence at the time of the base year, which may require considerable research to determine or estimate. Only if it is impossible to deter- mine a base year cost can the current cost of a new inventory item be used as the base year cost. For these reasons, the double-extension inventory valuation method is not recommended in most cases.
As an example, a company carries a single item of inventory in stock. It has re- tained the following year-end information about the item for the past four years:
Year Ending Unit Ending Current Extended at
Quantity Price Current Year-end Price
1 3,500 $32.00 $112,000
2 7,000 34.50 241,500
3 5,500 36.00 198,000
4 7,250 37.50 271,875
The first year is the base year on which the double-extension index will be based in later years. In the second year, we extend the total year-end inventory by both the base year price and the current year price, as follows:
Year-End Base Year Extended at Ending Current Extended at Quantity Cost Base Year Cost Price Ending Current Price
7,000 $32.00 $224,000 $34.50 $241,500
To arrive at the index between year two and the base year, we divide the extended ending current price of $241,500 by the extended base year cost of $224,000, yield- ing an index of 107.8%.
The next step is to calculate the incremental amount of inventory added in year two, determine its cost using base year prices, and then multiply this extended amount by our index of 107.8% to arrive at the cost of the incremental year two LIFO layer. The incremental amount of inventory added is the year-end quantity of 7,000 units, less the beginning balance of 3,500 units, which is 3,500 units. When multiplied by the base year cost of $32, we arrive at an incremental increase in inventory of $112,000. Finally, we multiply the $112,000 by the price index of 107.8% to determine that the cost of the year two LIFO layer is $120,736.
Thus, at the end of year two, the total double-extension LIFO inventory valua- tion is the base year valuation of $112,000 plus the year two layer’s valuation of
$120,736, totaling $232,736.
In year three, the amount of ending inventory has declined from the previous year, so no new layering calculation is required. Instead, we assume that the entire reduction of 1,500 units during that year were taken from the year two inventory layer. To calculate the amount of this reduction, we multiply the remaining amount of the year two layer (5,500 units less the base year amount of 3,500 units, or 2,000 units) times the ending base year price of $32 and the year two index of 107.8%.
This calculation results in a new year two layer of $68,992.
Thus, at the end of year three, the total double-extension LIFO inventory valu- ation is the base layer of $112,000 plus the reduced year two layer of $68,992, to- taling $180,992.
In year four, there is an increase in inventory, so we can calculate the presence of a new layer using the following table:
Year-End Base Year Extended at Ending Current Extended at Quantity Cost Base Year Cost Price Ending Current Price
7,250 $32.00 $232,000 $37.50 $271,875
Again, we divide the extended ending current price of $271,875 by the extended base year cost of $232,000, yielding an index of 117.2%.To complete the calcula- tion, we then multiply the incremental increase in inventory over year three of 1,750 units, multiply it by the base year cost of $32 per unit, and then multiply the result by our new index of 117.2% to arrive at a year four LIFO layer of $65,632.
Thus, after four years of inventory layering calculations, the double-extension LIFO valuation consists of the following three layers:
Layer Type Layer Valuation Layer Index
Base layer $112,000 0.0%
Year 2 layer 68,992 107.8%
Year 4 layer 65,632 117.2%
———––
Total $246,624 —
———––
———––
7-5 Link-Chain Inventory Valuation
Another way to calculate the dollar-value LIFO inventory is to use the link-chain method. This approach is designed to avoid the problem encountered during double- extension calculations, where one must determine the base year cost of each new item added to inventory. However, tax regulations require that the link-chain method only be used for tax reporting purposes if it can be clearly demonstrated that all other dollar-value LIFO calculation methods are not applicable because of high rates of churn in the types of items included in inventory.
The link-chain method creates inventory layers by comparing year-end prices to prices at the beginning of each year, thereby avoiding the problems associated with comparisons to a base year that may be many years in the past. This results in a rolling cumulative index that is linked (hence the name) to the index derived in the preceding year. Tax regulations allow one to create the index using a represen- tative sample of the total inventory valuation that must comprise at least one-half of the total inventory valuation. In brief, a link-chain calculation is derived by ex- tending the cost of inventory at both beginning-of-year and end-of-year prices to arrive at a pricing index within the current year; this index is then multiplied by the ongoing cumulative index from the previous year to arrive at a new cumulative index that is used to price out the new inventory layer for the most recent year.
The following example of the link-chain method assumes the same inventory information just used for the double-extension example. However, we have also noted the beginning inventory cost for each year and included the extended begin- ning inventory cost for each year, which facilitates calculations under the link-chain method.
Extended at Extended at
Ending Unit Beginning-of-Year End-of-Year Beginning-of-Year End-of-Year
Year Quantity Cost/each Cost/Each Price Price
1 3,500 $— $32.00 $— $112,000
2 7,000 32.00 34.50 224,000 241,500
3 5,500 34.50 36.00 189,750 198,000
4 7,250 36.00 37.50 261,000 271,875
As was the case for the double-extension method, there is no index for year one, which is the base year. In year two, the index will be the extended year-end price of
$241,500 divided by the extended beginning-of-year price of $224,000, or 107.8%.
This is the same percentage calculated for year two under the double-extension method, because the beginning-of-year price is the same as the base price used under the double-extension method.
We then determine the value of the year two inventory layer by first dividing the extended year-end price of $241,500 by the cumulative index of 107.8% to ar- rive at an inventory valuation restated to the base year cost of $224,026. We then subtract the year one base layer of $112,000 from the $224,026 to arrive at a new layer at the base year cost of $112,026, which we then multiply by the cumulative index of 107.8% to bring it back to current year prices. This results in a year two inventory layer of $120,764. At this point, the inventory layers are as follows:
Layer Type Base Year Valuation LIFO Layer Valuation Cumulative Index
Base layer $112,000 $112,000 0.0%
Year 2 layer 112,026 120,764 107.8%
Total $224,026 $232,764 —
———–– ———––
———–– ———––
In year three, the index will be the extended year-end price of $198,000 divided by the extended beginning-of-year price of $189,750, or 104.3%. Because this is the first year in which the base year was not used to compile beginning-of-year costs, we must first derive the cumulative index, which is calculated by multiply- ing the preceding year’s cumulative index of 107.8% by the new year three index of 104.3%, resulting in a new cumulative index of 112.4%. By dividing year three’s extended year-end inventory of $198,000 by this cumulative index, we arrive at in- ventory priced at base year costs of $176,157.
This is less than the amount recorded in year two, so there will be no inventory layer. Instead, we must reduce the inventory layer recorded for year two. To do so,