SFA-5.02/SFA-5.02M
4. Bare Solid and Tubular Electrodes and Rods 1 Standard Sizes and Shapes
4.6 Marking of Packages
4.6.1 The following product information (as a mini- mum) shall be legibly marked so as to be visible from the outside of each unit package:
(a) AWS specification and classification designations along with applicable optional designators (year of issue may be excluded).
(b) Supplier’s name and trade designation,
(c) Size and net weight or other suitable measure of quantity,
TABLE 4 STANDARD PACKAGESa
Outside Diameter,
Width Inside Diameter Max.
Type of Package in. mmb in. mmb in. mmb
3 max. 75 max. 63⁄4±1⁄8 170 ±3
Coils with support 21⁄2max. 90, +0,−15 12 ±1⁄8 300, +15,−0 17 435
45⁄8max. 100, +10,−5 12 ±1⁄8 300, +15,−5 18 450
5 max. 120, +10,−5 24 600, +20,−0 32 800
Coils without support As agreed upon between purchaser and supplier
4 100
8 200
12 300
Spools See Figs. 1A, 1B, and 1C 13.5 340
14 350
22 560
24 610
30 760
151⁄2 400
Drums Not applicable 20 500
23 600
Straight lengthsc Not applicable
NOTES:
a. Dimensions, tolerances, and package forms other than those shown shall be as agreed upon between purchaser and supplier.
b. Italicized values in the metric columns are as specified in ISO 544 for coils both with and without supports.
c. Standard lengths shall be 36, +0, −1⁄2in. [900, +15, −0 mm].
TABLE 3
STANDARD SIZES OF STRIP ELECTRODES
Width Thickness
in. mm in. mm
1.18 30 0.020 0.5
2.36 60 0.020 0.5
3.54 90 0.020 0.5
4.72 120 0.020 0.5
GENERAL NOTES:
(a) Other sizes shall be as agreed upon between purchaser and supplier.
(b) Strip electrodes shall not vary more than ±0.008 in. [±0.2 mm]
in width and more than ±0.002 in. [±0.05 mm] in thickness.
(d) Lot, control, or heat number.
4.6.2 The appropriate precautionary information4, as given in ANSI Z49.1, latest edition, (as a minimum) or its equivalent, shall be prominently displayed in legible print on all packages of electrodes, including individual unit packages enclosed within a larger package.
4Typical examples of “warning labels” are shown in figures in ANSI Z49.1 for some common or specific consumables used with certain pro- cesses.
Copyright ASME International (BPVC)
Provided by IHS under license with ASME Licensee=Khalda Petroleum/5986215001, User=Amer, Mohamed
Not for Resale, 07/02/2019 13:43:48 MDT No reproduction or networking permitted without license from IHS
--`,```,,,,,````,`,``,,`,,`,`-`-`,,`,,`,`,,`---
ASME BPVC.II.C-2019 SFA-5.02/SFA-5.02M
27
FIG. 1A DIMENSIONS OF 4 IN., 8 IN., 12 IN., AND 14 IN. [100 MM, 200 MM, 300 MM, AND 350 MM] SPOOLS
DRIVING HOLE
D E A
C
B
F
DIMENSIONS
4 in. [100 mm] Spools 8 in. [200 mm] Spools 12 in. [300 mm] Spools 14 in. [350 mm] Spools
ISO 544 Denomination S 100 S 200 S 300 S 350
in. mm in. mm in. mm in. mm
A Diameter, max. (Note 1) 4.0 102 8.0 203 12 305 14 355
B Width 1.75 45 2.16 55 4.0 103 4.0 103
Tolerance ±0.03 +0, −2 ±0.03 +0, −3 ±0.06 +0, −3 ±0.06 +0, −3
C Diameter 0.63 16.5 2.03 50.5 2.03 50.5 2.03 50.5
Tolerance +0.01, −0 +1, −0 +0.06, −0 +2.5, −0 +0.06, −0 +2.5, −0 +0.06, −0 +2.5, −0
D Distance Between Axes — — 1.75 44.5 1.75 44.5 1.75 44.5
Tolerance — — ±0.02 ±0.5 ±0.02 ±0.5 ±0.02 ±0.5
E Diameter (Note 2) — — 0.44 10 0.44 10 0.44 10
Tolerance — — +0, −0.06 +1, −0 +0, −0.06 +1, −0 +0, −0.06 +1, −0
GENERAL NOTES:
(a) Outside diameter of barrel, dimension F, shall be such as to permit proper feeding of the electrode.
(b) Inside diameter of the barrel shall be such that swelling of the barrel or misalignment of the barrel and flanges will not result in the inside of the diameter of the barrel being less than the inside diameter of the flanges.
NOTES:
1. Metric dimensions and tolerances conform to ISO 544, except that “A” specifies ± tolerances on the nominal diameter, rather than a plus tolerance only, which is shown here as a maximum.
2. Holes are provided on each flange, but they need not be aligned. No driving holes required for 4 in. [100 mm] spools.
Copyright ASME International (BPVC)
Provided by IHS under license with ASME Licensee=Khalda Petroleum/5986215001, User=Amer, Mohamed
Not for Resale, 07/02/2019 13:43:48 MDT No reproduction or networking permitted without license from IHS
--`,```,,,,,````,`,``,,`,,`,`-`-`,,`,,`,`,,`---
ASME BPVC.II.C-2019 SFA-5.02/SFA-5.02M
28
FIG. 1B DIMENSIONS OF 22 IN., 24 IN., AND 30 IN. [560 MM, 610 MM, AND 760 MM] SPOOLS (REELS)
SECTION A–A
E
A
D A C
F
B
A
DIMENSIONS
22 in. [560 mm] Spools 24 in. [610 mm] Spools 30 in. [760 mm] Spools
ISO 544 Denomination S 560 S 610 S 760
in. mm in. mm in. mm
A Diameter, max. (Note 1) 22 560 24 610 30 760
B Width, max. 12 305 13.5 345 13.5 345
C Diameter 1.31 35.0 1.31 35.0 1.31 35.0
Tolerance +0.13, −0 ±1.5 +0.13, −0 ±1.5 +0.13, −0 ±1.5
D Distance, Center-to-Center 2.5 63.5 2.5 63.5 2.5 63.5
Tolerance ±0.1 ±1.5 ±0.1 ±1.5 ±0.1 ±1.5
E Diameter (Note 2) 0.69 16.7 0.69 16.7 0.69 16.7
Tolerance +0, −0.06 ±0.7 +0, −0.06 ±0.7 +0, −0.06 ±0.7
GENERAL NOTES:
(a) Outside diameter of barrel, dimension F, shall be such as to permit proper feeding of the electrode.
(b) Inside diameter of barrel shall be such that swelling of the barrel or misalignment of the barrel and flanges will not result in the inside diameter of the barrel being less than the inside diameter of the flanges.
NOTES:
1. Metric dimensions and tolerances conform to ISO 544, except that “A” specifies ± tolerances on the nominal diameter, rather than a plus tolerance only, which is shown here as a maximum.
2. Two holes are provided on each flange and shall be aligned on both flanges with the center hole.
Copyright ASME International (BPVC)
Provided by IHS under license with ASME Licensee=Khalda Petroleum/5986215001, User=Amer, Mohamed
Not for Resale, 07/02/2019 13:43:48 MDT No reproduction or networking permitted without license from IHS
--`,```,,,,,````,`,``,,`,,`,`-`-`,,`,,`,`,,`---
ASME BPVC.II.C-2019 SFA-5.02/SFA-5.02M
29
FIG. 1C DIMENSIONS OF STANDARD 131⁄2IN. [340 MM] STANDARD SPOOLS (FOR Al AND Mg ALLOYS ONLY)
SECTION A–A A
E B
H
D A
F G C
A
DIMENSIONS
in. mm
A Diameter 13.50 342
Tolerance +0, −0.06 ±2
B Width 5.13 130
Tolerance ±0.06 ±2
C Diameter 2.03 50.5
Tolerance +0.06, −0 +2.5, −0
D Distance Between Axes 1.75 44.5
Tolerance ±0.02 ±0.5
E Diameter 0.44 10
Tolerance +0, −0.06 +1, −0
F Diameter 7.0 177.5
Tolerance ±0.03 ±1.0
G Diameter 5.0 127
Tolerance ±0.03 ±0.8
H Recess 1.13 31
Tolerance +0.12, −0 ±2
GENERAL NOTE: Holes are provided on each flange, but they need not be aligned.
Copyright ASME International (BPVC)
Provided by IHS under license with ASME Licensee=Khalda Petroleum/5986215001, User=Amer, Mohamed
Not for Resale, 07/02/2019 13:43:48 MDT No reproduction or networking permitted without license from IHS
--`,```,,,,,````,`,``,,`,,`,`-`-`,,`,,`,`,,`---
ASME BPVC.II.C-2019 SFA-5.02/SFA-5.02M
30
FIG. 1D DIMENSIONS OF BASKET RIMS AND BASKET SPOOLS
A
B
C A
B D C
BASKET SPOOL (BS) BASKET RIM (B)
DIMENSIONS
Basket Rim B300 Basket Rim B 450 Basket Spool BS 300 ISO 544 Denomination
in. mm in. mm in. mm
A Diameter 11.7 300 17.7 max. 450 max. 12.0 300
Tolerance ±0.1 +0, −5 +0, −0.4 ±5
B Width 4.0 103 4 100 4.0 103
Tolerance ±0.06 +0, −3 +0.06, −0.18 ±3 ±0.06 +0, −3
C Diameter 7.0 180 12.0 300 7.44 189
Tolerance +0.2, −0 ±2 +0, −0.4 ±5 ±0.02 ±0.5
D Bore — — — — 2.03 50.5
Diameter +0.06, −0 +2.5, −0
Copyright ASME International (BPVC)
Provided by IHS under license with ASME Licensee=Khalda Petroleum/5986215001, User=Amer, Mohamed
Not for Resale, 07/02/2019 13:43:48 MDT No reproduction or networking permitted without license from IHS
--`,```,,,,,````,`,``,,`,,`,`-`-`,,`,,`,`,,`---
ASME BPVC.II.C-2019 SFA-5.02/SFA-5.02M
31