Distinguish participants and guests, welcome to Bali, welcome to Indonesia and welcome to the International Conference on High Voltage Engineering and Power System 2019 (ICHVEPS 2019). The ICHVEPS 2019 is a biennial conference organized by the School of Electrical Engineering and Informatics, Institut Teknologi Bandung (ITB), Indonesia and sponsored by IEEE Indonesia Section, IEEE Power and Energy Society Indonesia Chapter, IEEE Indonesia Student Branch and PT. The conference is intended as an international forum for the exchange of ideas, discussion and dissemination of research results and recent technologies in the field of high-voltage engineering and energy systems from energy companies, universities, research institutes and industries.
Methods for predicting the remaining life of a power cable based on partial discharge according to load factor calculation. Time passage of partial discharge characteristics in a model XLPE cable joint considering long-term operation and deterioration. The Effect of the Presence of Holes on a Metal Enclosed Electrical Device on the Partial Discharge Detected by an External Sensor Umar Khayam and Mukhlisah Yunus 287 .
Pengaruh penuaan busur listrik terhadap sifat dielektrik dan pola pelepasan sebagian ester minyak sawit alami Yulia Erina Sari, Tjokorda Istri Diah Karisma Dewi dan Suwarno 380 Institut Teknologi Bandung, Indonesia.
LIST OF PAPERS
Risk cost analysis and impact of dip voltage, case study of the food and beverage industry in East Java. Modeling of synchronous generator for transient stability in power system Yurika, Suwarno, Gibson HM Sianipar and Janson Naiborhu. Design of IoT-Based Monitoring System for Miniature Smart Grid Waluyo, Febrian Hadiatna, Andre Widura, and Rangga Maulana Institut Teknologi Nasional, Indonesia.
Effect of the presence of hole on metal-encased current device on partial discharge detected by external sensor. Investigation of synchronous generator stability in high-penetration solar power system under varying solar irradiance. Investigation and Design of Off-Grid PV Power System in Pirien, Asmat Regency, Papua Province Using MATLAB/SIMULINK.
Classification of Faults in a Test Power System Using Artificial Neural Network Dhruba Kumar and Partha Sarathee Bhowmik. The impact of the auto-reclose using leader-follower control scheme on transmission power system stability improvement. Chih-Chiang Hua, Li-Kai Chou, Chih-Wei Chuang, and Ching-Chun Chuang National Yunlin University of Science and Technology, Taiwan, R.O.C.
Non-dominated sorting genetic algorithm III for multi-objective optimal reactive power dispatch problem in electric power system. Sabhan Kanata, Suwarno, Gibson Hilman Sianipar and Nur Ulfa Maulidevi Bandung Institute of Technology, Indonesia. Qiuye Li, Zhousheng Zhang, Ya Wang, Peng Liu and Shuaichuan Shang Shanghai University of Electric Power, China.
Proceedings of the 2nd International Conference on High Voltage Engineering and Power Systems: Towards Sustainable and Reliable Power Delivery, ICHVEPS 2019
Proceedings of the 2nd International Conference on High Voltage Engineering and Power Systems: Towards Sustainable and Reliable Power Delivery, ICHVEPS 2019. The graph shows the evolution of the average number of times documents were published in a journal in the last two, three and four years was quoted in the current year. Journal Self-citation is defined as the number of citations from a journal citing article to articles published by the same journal.
Evolution of the number of total citations per document and external citations per document (i.e. self-citations removed from journals) received by a journal's published documents during the three previous years. External citations are calculated by subtracting the number of self-citations from the total number of citations received by the journal's papers. International Collaboration takes care of the articles produced by researchers from different countries.
The chart shows the ratio of a journal's papers signed by researchers from more than one country; that includes more than one country address. Not every article in a journal is considered primary research and therefore "citable", this graph shows the ratio of a journal's articles including substantial research (research articles, conference papers, and reviews) in three-year windows versus the ratio of articles of a journals, grouped in three-year windows, that have been cited at least once against.
SCImago GraphicaSCimago GraphicaSCimago Graphica Discover, visuallyExplore, visuallyExplore, visually communicate and createcommunicate and createcommunicate and give meaning to data with our sense of data with our sense of data with our new data visualizationnew data visualizationnew data visualization tooltooltool. The users of Scimago Journal & Country Rank have the option to communicate through comments associated with a specific journal. The aim is to have a forum in which general doubts about the processes of publication in the journal, experiences and other issues arising from the publication of articles are resolved.
For topics for special articles, maintain dialogue through the usual channels with your editor. Research on a Kind of Ubiquitous Power Internet of Things System for Strong Smart Energy Grid 2019 IEEE Innovative Smart Grid Technologies - Asia (ISGT Asia) Published: 2019.
Design of IoT Based Monitoring System for Miniature Smart Grid
- X-XXX/XX/$XX.00 ©20XX IEEE
- D ESIGN M ETHOD
- R ESULTS AND D ISCUSSION
- C ONCLUSIONS
Abstract – This article presents a preliminary design of an IoT-based monitoring system for miniature smart grids. The aim of the research is currently to design a monitoring system based on IoT for miniature smart grids. A necessary component for an IoT-based monitoring system. Figure 2 shows the schematic diagram of the overall system design.
The relay 1 served as a determiner of whether the system would operate on-grid or off-grid by observing two parameters, namely the supply from the grid, and also the condition of the battery. If there was input from the grid and the battery was fully charged, the solar panel input would be sent directly to the grid. Otherwise, if the battery is not charged or empty, the relay 1 will prioritize the supply of the solar power 2019 International Conference on High Voltage Engineering and Power System.
The relay 2 functioned to disconnect and connect the supply from the solar panel while providing a signal to the relay 1. If no current is detected from the grid, the relay will cut off the supply from the solar panel to the grid. If the current is detected from the grid, the feed will be sent from the inverter to the grid.
The relay 3 operated to disconnect or connect the supply from the battery to the load. If relay 2 detected that there was no supply from the grid, relay 3 would be told to connect the batteries to the load. While relay 2 detected that there was some supply from the grid, relay 3 would get a signal to disconnect the batteries from the connected load.
These devices acted as a regulator of the supply of solar panels, which would be sent to the grid or to the battery depending on the parameter set. This device worked to connect and disconnect the supply of the batteries to the load. Nevertheless, at the second of 407, the lamp load was interrupted, so the current would be zero.
LIST OF AUTHORS
ICHVEPS 2019 LIST OF AUTHORS
We invite you to present your paper at the 2nd International Conference on High Voltage Engineering and Power Systems 2019, October at Grand Bali Beach Hotel, Denpasar, Bali, Indonesia.
Dr. Umar Khayam
