DAFTAR PUSTAKA
[1] A. Mursyid, “THESIS INFLUENCE OF CUTTING THICKNESS ON CARBIDE TOOLS ON AISI STEEL TURNING 1045 USING CNC LATHE QTN 100 U DEPARTEMENT OF MECHANICAL ENGINEERING.”, eprints.akpird, 2020. https://eprints.akprind.ac.id/120 [2] H. Budiman, R. Laboratorium, P. Produksi, J. T. Mesin, and T. Industri,
“Analisis Umur dan Keausan Pahat Karbida untuk Membubut Baja Paduan (ASSAB 760) dengan Metoda Variable Speed Machining Test.” [Online].
Available:
http://www.petra.ac.id/~puslit/journals/dir.php?DepartmentID=MES [3] R. A. Pradana, M. Wawan, J. Usman, and A. Faoji, “PERBANDINGAN
MATA PAHAT HSS DENGAN MATA PAHAT KARBIDA UNTUK PEMAKANAN BENDA KERJA BAJA ST 41.”, Tegal : Politeknik Harapan Bersama Tegal., 2019
[4] J. A. Olortegui-Yume and P. Y. Kwon, “Tool wear mechanisms in machining,” International Journal of Machining and Machinability of Materials, vol. 2, no. 3–4, pp. 316–334, 2007, doi:
10.1504/ijmmm.2007.015469.
[5] “Variasi kecepatan Pemotongan Proses Pembubutan Baja AISI 4140 Terhadap Keausan Dan Umur Pahat karbida,” vol. 17, pp. 1–57, Dec. 2021.
[6] J. Teknik, M. Politeknik, N. Semarang, and J. H. Sudarto, “Zaenal Abidin,”
2010.
[7] F. A. Yessika, “PENGARUH VARIASI JENIS BAJA TERHADAP,” 2020.
[8] S. Lubis, S. Darmawan, R. dan Tommi Tanuwijaya, and P. Studi Teknik Mesin, “Analisa pertumbuhan keausan pahat karbida coated dan uncoated
pada alloy steel AISI 4340,” Jurnal Energi dan Manufaktur, vol. 9, no. 2, pp. 114–118, 2016, [Online]. Available: http://ojs.unud.ac.id/index.php/jem [9] J. Chendri, “THE WEAR CHARACTERISTIC OF CARBIDE INSERTS
CHISEL DUE TO DRY MACHINING OF STAINLESS STEEL.”
[10] “Cutting Tools Catalogue Turning Holemaking Milling Threading 2021 WINSTAR CUTTING TECHNOLOGIES CORP. Chasing the dream and passion in developing the high quality cutting tools, Winstar Cutting Technologies Corp. was established in 2008. Welcome Joining the Winstar Family!”
[11] “Manufacturing Engineering and Technology in SI Units, 8th Edition, Global Edition (Serope Kalpakjian, Steven Schmid).pdf,” Vk.com, 2023.
https://vk.com/doc26152157_638109218?hash=cnS9HZyYQcpgJQ2gZNH zYibwTzl4o7gF41hqUy1fxLg (accessed Jul. 06, 2023)
[12] “AISI 4140 Chrome-Molybdenum High Tensile Steel.”
https://www.azom.com/article.aspx?ArticleID=6116 (accessed Mar. 23, 2023).
[13] “View of VARIASI KECEPATAN PEMOTONGAN PROSES PEMBUBUTAN BAJA AISI 4140 TERHADAP KEAUSAN DAN UMUR MATA PAHAT KARBIDA”, Accessed: Mar. 23, 2023. [Online]. Available:
https://journal.untar.ac.id/index.php/poros/article/view/15394/9020 [14] Rochim Taufiq, Teori & Teknologi PROSES PERMESINAN. 1993.
[15] V. S. Pahade, P. S. Chavan, and V. Baisane, “A review paper on Vapour deposition coating,” International Journal of Engineering and Applied Sciences, 2016.https://www.semanticscholar.org/paper/A-review-paper-on- Vapour-deposition-coating-Pahade
Chavan/c62389a0e8da155b0f9ba740da7c751bcbb10955 (accessed Jul. 06, 2023).
[16] W. D. Callister and D. G. Rethwisch, Materials Science and Engineering.
Wiley Global Education, 2018. Accessed: Jul. 06, 2023. [Online].
Available: https://www.wiley.com/en-
sg/Materials+Science+and+Engineering:+An+Introduction,+10th+Edition- p-9781119405498
