72
DAFTAR PUSTAKA
Amin, Ahmadil. (2015). Analisis Struktur Mikro dan Fraktografi Hasil Pengelasan GMAW Metode Temper Bead Welding dengan Variasi Temperatur Interpass pada Baja Karbon Sedang. SNTTM XIV, Banjarmasin.
ASM International. (1981). Metals Handbook: Heat Treating, Vol. 4, 9th Edition.
ASM International, Materials Park, OH.
ASM International. (1990). Binary Alloy Phase Diagrams, 2nd Edition, Vol. 1.
ASM International, Materials Park, OH.
ASM International. (1993). Metals Handbook: Welding, Brazing, and Soldering, Vol. 6, 9th Edition. ASM International, Materials Park, OH.
ASME. (2010). Sec. IX: Qualification Standard for Welding and Brazing Procedures, Welders, Brazers, and Welding and Brazing Operators.
ASME, New York, USA.
ASTM. (2010). ASTM Intenational E112: Standard Test Method for Determining Average Grain Size. United States, ASTM Internasional.
ASTM E8/E8M. (2013). Standard Test Methods for Tension Testing of Metallic Materials. ASTM International, USA.
Avner, S. H. (1974). Introduction to physical metallurgy Vol. 2. McGrawhill, New York.
AWS A5.15/5.15M. (2004). Specification for Carbon Steel Electrodes for Shield Metal Arc Welding. AWS, Miami, USA.
AWS A5.20/5.20M. (2005). Specification for Carbon Steel Electrodes for Flux- Cored Arc Welding. AWS, Miami, USA.
AWS D1.1 (2010). Structural Welding Code – Steel. AWS, Miami, USA.
Callister, Willian D., dan Rethwisch, David G. (2014). Material Science and Engineering: An Introduction 9th Edition. John Wiley and Sons Inc.
Hoboken, New Jersey.
FHWA. (2019). Bridge Welding Reference Manual. FHWA Report No. FHWA- HIF-19-088, Federal Highways Administration Office of Bridge Technology, Washington, DC.
73 Groover, Mikell P. (2010). Fundamentals of Modern Manufacturing: Materials, Processes, and Systems 4th Edition. John Wiley and Sons, inc. Hoboken, New Jersey.
Hamid, Abdul. (2016). Analisa Pengaruh Arus Pengelasan SMAW Pada Material Baja Karbon Rendah Terhadap Kekuatan Material Hasil Sambungan.
Jurnal Tenik Elektro Vol. 7 No.1, Universitas Mercu Buana.
Harrison, P. L., dan Farrar, R. A. (1981). Influence Oxigen-Rich Inclusion on y-a Phase Transformation in High Strength Low Alloy (HSLA) Steel Weld Metal. Journal of Material Science, 16, pp.349-3.
Jeffus, Larry. (2016). Welding: Principles and Applications 8th Edition. Cengage Learning, Boston, USA.
Kobelco. (2015). Weld Imperfection and Preventive Measures. Kobe Steel LTD, Tokyo, Jepang.
Kou, Sindo. (2003). Welding Metallurgy 2nd Edition. John Wiley and Sons, Inc.
Hoboken, New Jersey.
Nugroho, Adi, dan Setiawan, Eko. (2018). Pengaruh Variasi Kuat Arus Pengelasan Terhadap Kekuatan Tarik dan Kekerasan Sambungan Plate Carbon Steel ASTM A36. Jurnal Rekayasa Sistem Industri Vol. 3 No. 5.
Riadi, Fajar, dan Setyawan, Dony. (2013). Analisa Mechanical dan Metallurgical Pengelasan Baja Karbon Rendah A36 dengan Metode SMAW. ITS, Surabaya.
Ridway, Balaka, Kadir, Abdur, dan Tolantomo, D. S. (2006). Analisis Pengaruh Arus pada Sudut Elektroda 70° Terhadap Sifat Kekerasan dan Struktur Mikro Baja Karbon Rendah Menggunakan JIG Welding. Jurnal Ilmiah Teknik Mesin Universitas Halu Oleo, Kendari.
Rudarmel, Michael. (1994). Radiographic Film Interpretation of Weldments.
Quality Consulting, Inc., USA.
Saiful, Askar, Sinarep, dan Sari, Nasmi Herlina. (2013). Pengaruh Preheat dan Tempering Terhadap Kekerasan dan Struktur Mikro Hasil Pengelasan Baja JIS SS400. Universitas Mataram, NTB.
74 Sebayang, Rihat. (2016). Perubahan Sifat Mekanis dan Bentuk Struktur Mikro Baja AISI 1040 Akibat Polarisasi Arus Pada Pengelasan SMAW. Politeknik Negeri Medan, Medan.
Weman, Klass. (2003). Welding Processes Handbook. Woodhead Publishing Limited, Cambridge, England.
Wiryosumarto, Harsono dan Okumura, Toshie. (2000). Teknologi Pengelasan Logam. Pradnya Paramita, jakarta.
