153
DAFTAR PUSTAKA
Alkhathami, Hamzi (2005), “Causes Delay in Building Construction Projects”, Journal of Management in Engineering Vol. 11 No. 2 hal. 45-50.
Alsharif, Samer dan Aslihan Karatas. (2016), “A Framework for Identifying Casual Factors of Delay in Nuclear Power Plant Project”, Procedia Engineering, International Conference of Sustainable Design, Engineering and Construction, No. 145, hal. 1486-1492.
Anityasari, M. dan Wesiani, N.A. (2011). Analisis Kelayakan Usaha, Skripsi, Universitas Guna Widya. Surabaya.
Ardi, Afrinur Winursito., Widi Hartanto dan Sugiyarto. (2017), “Analisis Risiko Manajemen Material dan Berpengaruh Tindakan Koreksi pada Proyek Gedung Bertingkat”, e-Jurnal Matriks Teknik Sipil Juni, hal. 377-385.
Arikunto, Suharsimi. (2010), Prosedur Penelitian Suatu Pendekatan Praktek, Rineka Cipta, Jakarta.
Asmarantaka, Nadya Safira. (2014), “Analisis Resiko Yang Berpengaruh Terhadap Kinerja Proyek Pada Pembangunan Hotel Batiqa Palembang”, Jurnal Teknik Sipil dan Lingkungan ISSN: 2355-374X, Vol. 2, No. 3, hal. 483-491.
Assaf, Al-Khalil and Al-Heiji M.A. (2006), “Important Causes of Delay in Public Utility Projects in Saudi Arabia”, Journal of Construction Management and Economics Vol. 17 No. 5 hal. 647-655.
Aritonang, Ainal Hamdah., Crecencia M. Limbong, Jati Utomo D.H. dan Frida Kistiani. (2016), “Simulasi Pengaruh Risiko Supply Chain Terhadap Keterlambatan Pengadaan Material Baja Tulangan dengan Metode Monte Carlo, Jurnal Karya Teknik Sipil Vol. 5, No. 2, hal. 18-28.
Aurelia, Audina., Nuh, Safaruddin Muhammad dan Mulyani, Endang. (2016).
“Penerapan Metode Monte Carlo Pada Penjadwalan Pekerjaan Proyek Konstruksi (Studi Kasus Proyek Pembangunan Gedung Ditreskrimsus Polda KALBAR), e-Jurnal Matriks Teknik Sipil, hal. 1-9.
154 Australian/New Zealand Standar. 2009. ISO 31000:2009. Risk Management
Principles and Guidelines. Australia.
Badan Pengembangan dan Pembinaan Bahasa (2008), Kamus Besar Bahasa Indonesia, Balai Pustaka, Jakarta.
Bahrin, M. A. K., Othman, M. F., Azli, N. H. N., dan Talib, M. F. (2016), “Industry 4.0: A review on industrial automation and robotic”, Jurnal Teknologi, Vol.
78, No. 6–13, hal. 137–143.
Browden, A., Malcolm, R dan Julia H. (2001). Tripple Bottom Line Risk Management, Undergraduate. New York.
Conelly, L., M. (2008), “Pilot Studies”, Medsurg Nursing, No. 17, hal. 411-412.
Cooper, F. Grey, S., Raymond, G. dan Walker, P. (2005). Project Risk Management Guideline, Managing In Large Projects and Complex Measurement. USA.
Desai, Megha dan Rajiv Bhatt. (2013), “Critical Causes of Delay in Residential Construction Project: Case Study of Central Gujarat Region of India”
International Jurnal of Engineering Trends and Technology, Vol.4, hal.762-767.
Corporation, P. (2008). Monte Carlo Simulation [Online]. Tersedia di:
http://www.palisade.com/Risk /Monte_Carlo_Simulation.Asp. [diakses pada tanggal 21 Desember 2019].
De Mauro, A., Greco, M., dan Grimaldi, M. (2016), “A formal definition of Big Data based on its essential features”, Library Review, Vol. 65, No. 3, hal.
122–135.
Dimyati H.A. Hamdan dan Nurjaman Kadar (2014), Manajemen Proyek: Bandung Djohanputro, Bramantyo. (2008), Manajemen Risiko Korporat. Jakarta.
E, Manavalan dan Jayakhrisna K. (2019), “A review of Internet of Things (IoT) Embedded Suistinable Supply Chain for Industry 4.0 Requirements”, Journal Computers anda Industrial Engineering No. 127, hal. 925-953.
Fatorcahian, H. dan Kazemi, FF. (2018), “A Critical Investigation of Industry 4.0 in Manufacturing Theoritical Operationalisation Frmework”, Production Planning & Control, Vol. 29 No. 8 hal. 633-644.
155 Ferreira, Nuno., Glberto Santos, Rui Silva. (2019), “Risk Level in Construction Sites: Towards a Computer Aided Methodology – A Case Study”. Journal Applied Computing and Informatics Vol.15, hal. 136-143.
Ferreira, N., dan Santos, G. (2014), “Simultaneity of risk in the civil site construction: An analysis of accumulated risk”, Occupational Safety and Hygiene II - Selected Extended and Revised Contributions from the International Symposium Occupational Safety and Hygiene, SHO 2014, London, 259–264.
Ferreira Rebelo, M., Silva, R., dan Santos, G. (2017), “The integration of standardized management systems: managing business risk”, International Journal of Quality and Reliability Management, Vol. 34, No. 3, hal. 395–
405
Firmenich, J. (2017), “Customisable Framework for Project Risk Management”, Construction Innovation Vol. 17 No. 1 hal. 68-89.
Fugar, Frank D.K. dan Adwoa B. Agyakwah-Baah. (2010), “Delays in Building Construction Project in Ghana”, Australasian Journal of Construction Economics and Building, Vol. 10, No.1, hal. 103-116.
George, G. B., dan Mallary, M. C. (2009), “How Can We Improve School Discipline”, Journal of Education Research, Vol. 39, hal. 48–58.
Hasan, Haekal., Jantje B. Mangare dan Pingkan A.K. Pratasis. (2016), “Faktor – Faktor Penyebab Keterlambatan pada Proyek Konstruksi dan Alternatif Penyelesaiannya (Studi Kasus: di Manado Town Square III)”, Jurnal Sipil Statik Vol.4 No. 11, hal. 657-664.
Haseeb, M., Xinhai-Lu, Aneesa Bibi, A., Maloof-ud-Dyian and Rabbani, W.
(2011), “Causes and Effects of Delay in Large Construction Projects of Pakistan”. Kuwait Chapter of Arabian Journal of Business and Management Review Vo. 1 No.4 December 2011.
Hatmoko, J.U. Dwi., dan Kristiani, Frida. (2017), “Model Simulasi Risiko Rantai Pasok Material Proyek Konstruksi Gedung” Jurnal Media Komunikasi Teknik Sipil Vo. 23, No. 1, hal. 1-13.
156 Hegazy, T. M., dan Menesi, W. (2007), “Delay analysis under multiple baseline
updates”, AACE International Transaction.
Heilala, J., Vatanen, S., Tonteri, H., Montonen, J., Lind, S., Johansson, B., dan Stahre, J. (2008), “Simulation-based sustainable manufacturing system design”, Proceedings - Winter Simulation Conference, Miami, hal.1922–
1930.
Herumanta, Bambang dan Kurniawan, Agus. (2016), “Kajian Manajemen Risiko Pekerjaan Struktur Bawah Pada Proyek Gedung Bertingkat”, Prosiding Seminar Nasional Teknologi Terapan SV UGM 2016, hal. 1175-1179.
Hosny, Hossam. E., Ibrahim, Ahmed.H dan Fraig, Raymond. F. (2018), “Risk Management Framework for Continuous Flight Auger Piles Construction in Egypt”, Alexandria Journal Engineering Vol. 57, No. 4, hal. 2667-2677.
Ibironke, Olajide Timothy., Timo Olugbenga Oladinrin, Onaopepo Adeniyi dan Idowu Victor Eboreime. (2013), “Analysis of Non-Excusable Delay Factors Influencing Contractors Performance in Lagos State, Nigeria”, Journal of Construction in Developing Countries, Vol. 18, No. 1, hal. 53-72.
Indah, Sinta Nur. (2017), Analisis Risiko Manajemen Mutu dan Penyusunan Prosedur Pengendalian Mutu Pekerjaan Subkontraktor Pada Proyek Apartemen Gold Coast PIK Jakarta, Tugas Akhir, Institut Teknologi Sepuluh Nopember, Surabaya.
Ismael, Idzurnida. (2013), “Keterlambatan Proyek Konstruksi Gedung Faktor Penyebab dan Tindakan Pencegahannya”, Jurnal Momentum Vol.14, No.1, hal.46-55.
Isnaini, R. (2011), “Analisis Dan Respon Risiko Pada Proyek Pembangunan Galangan Kapal Kabupaten Lamongan,” hal. 1–23.
Intitute, P. M. (2013). A Guide to the Project Management Body Knowledge.
Penysilvania, Project Management Institute.
Jogiyanto (2008), Analisis dan Desain Sistem Informasi: Pendekatan Terstruktur Teori dan Praktek Aplikasi Bisnis, Yogyakarta.
157 Kamble, S.S., Gunasekaran, A dan Gawankar, S.A. (2018), “Sustainable Industry 4.0 Framework: A Systematic Literature Review Identifying the Current and Future Perspective”, Process Safety and Environmental Protection, Vol.
117 hal. 408-425.
Kusuma, D., Syairudin, B., dan Achmadi, F. (2018), “Ketenagalistrikan Menggunakan Metode Ahp Dan Fuzzy Topsis”, Jurnal Bisnis Dan Manajemen, Vol. 12, No. 3, hal. 272–283.
Kikwasi, G.J. (2012), “Causes and Effect of Delays and Disruption in Construction Project in Tanzania”. Australasian Journal of Construction Economics and Building, Conference Series Vo. 1 No. 2 hal. 52-59.
Kountur, R. (2004), Metode Penelitian Penulisan Skripsi dan Tesis, PPM, Jakarta.
Lestari, Puji (2011), Upaya Peningkatan Kemampuan Kognitif Anak Melalui Bermain Puzzle Kelompok B di TK Klumprit 1 Mojolaban Sukoharjo Tahun Ajaran 2011/2012, Skripsi, Universitas Muhammadiyah Surakarta.
Lepar, Frangky Ronald., Mandagi, Robert J.M., Lumeno, Shirly S. (2018), “Model Risiko Pada Tahapan Pelaksanaan Pembangunan Proyek Bangunan Swasta Yang Berpengaruh Terhadap Kinerja Proyek”, Jurnal Teknik Sipil Vol. 6, No.2, hal. 125-136.
Liang, Lore Wenhui., Pin-Chao Liao dan Ganbat Tsenguun. (2016), “Development of Social Responsibility Evaluation Framework of Construction Projects: A Mullti-Stakeholders Perspective”, Procedia Engineering., International Conference on Suistainable Design, Engineering and Construction, Beijing China, hal. 234-241.
Magdalena, Hilyah. (2017), “Strategi Meningkatkan Kualitas Bimbingan Skripsi Mahasiswa Strata ary STMIK Atma Luhur”, Jurnal Sistem Informasi dan Komputer, Vol. 2, hal. 1-19.
Maharani, Galuh Rizma. (2011), Manajemen Risiko Biaya dan Waktu pada Pekerjaan Struktur Bawah dari Proyek Bangunan Gedung Bwertignkat Tinggi di Jakarta, Skripsi, Universitas Indonesia, Jakarta.
Malik, S.A., dan Holt, B. (2013), “Factors that Effect the Adoption of Enterprise Risk Management (ERM)”, Journal of OR Insight, Vol. 26, No. 4, hal. 253–
269.
158 Marzouk, Mohamed M. dan Tarek I. El-Rasas. (2014), “Analyzing Delat Causes in Egyptian Construction Projects”, Journal of Advanced Research Vol. 5, hal.
49-55.
Masood, Rehan., Mahbood Ali, Fizan Shafique, Muhammad Awais Shafique, Bilal Zafar, Ahsen Masqoom dan Zeeshan Ullah. (2015), “Investigating the Delay Factors of Construction Project in Metropolitas City of Developing Coutry”, Journal Civil Engineering and Architecture Research Vol.2, No.9, hal.947-955.
Menteri Perdagangan Republik Indonesia (2013). Peraturan Menteri Perdangan Republik Indonesia Nomor 70 Tahun 2013 Tentang Pedoman Penataan dan Pembinaan Pasar Tradisional Pusat Perbelanjaan dan Toko Modern, Jakarta.
Moktadir, M. A., Ali, S. M., Kusi-Sarpong, S., dan Shaikh, M. A. A. (2018),
“Assessing challenges for implementing Industry 4.0: Implications for process safety and environmental protection”, Process Safety and Environmental Protection, Vol. 117, hal. 730–741.
Mukuka, Mulenga., Clinton Aigbavboa dan Wellington Thwala. (2015), “Effects of Construction Projects Schedule Overruns: A Case of The Gauteng Province, South Africa”, Procedia Manufacturing Vol. 3, 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affliated Conference, AHFE 2015, South Africa.
Nugraheni, Vita Melia. (2012), Analisa Risiko Lingkup Non Excusable pada Tahap Pelaksanaan Proyek Pembangunan Stasiun Daerah Kantor X yang Berpengaruh Terhadap Perubahan Kinerja Proyek, Tesis, Program S2 Manajemen Proyek Universitas Indonesia, Jakarta.
Perlekar, N. and Thakkar, J.J. (2019), “Risk Management Framework for Out Sourcing in The Defense Sector: A Case from India”, International Journal of Production Research, Vol. 57 No. 18 hal. 5892-5919.
Prabhakar, Guru.. Ziyu Wu, Tahir Nisar, Dharm Kaptelia. (2017), “Risk Factors for Project Success in The Chinese Construction Industry”, Journal of Manufacturing Management Vol.27, No.17, hal. 851-866.
159 Project Management Body of Knowledge (PMBOK). (2013), A Guide to the Project Management Body of Knowledge: Fourth Edition Chapter 11, Project Manajement Istitute, Inc., 14. Campus Boulevard: Newton Square hal. 273-312.
Pourrostam, T. and Ismail A. (2011), “Significan Factors Causing and Effect of Delay in Iranian Construction Projects”, Australian Journal of Basic and Applied Sciences Vol.5 No. 7 hal. 450-456.
Rane, Santosh B., Prathamesh Ramkrishana Potdar dan Suraj Rane. (2019),
“Development of Project Risk Management Framework Based on Industry 4.0 Technologies”, International Journal Emerald Publishing Limited BIJ Vol.3, hal. 1-31.
Rane, S., Narvel Y.A.M. (2019), “Re-Designing the Business Organisation using Disruptive Innovations Based on Blockchain-IoT Integrated Architecture for Improving Agility in Future Industri 4.0”, Benchmarking: An International Journal BIJ-12-2018-0445.
Renaldhi, Muhamada Revi. (2014), Analisis Risiko Keterambatan Proyek Pembangunan Tangki X di TTU-TUBAN (Studi Kasus: PT Pertamina UPMS V), Tugas Akhir, Institut Teknologi Sepuluh Nopember, Surabaya.
Rezai, M., Akbarpour Shirazi, M. dan Karimi. (2017), “IoT-based Framework for Performance Measurement: A Real-Time Supply Chain Decision Aligment”, Industrial Management & Data System Vol. 117 No. 4 hal. 688- 712.
Rifai, Wahyu. (2018), Analisis Risiko Keterlambatan Pelaksanaan Konstruksi Poyek Spazio Tower 2 Surabaya, Tesis, Program S2 Manajemen Proyek Institut Teknologi Sepuluh Nopember, Surabaya.
Rozak, Abdur Rasyid. (2008), Identifikasi Faktor – Faktor Dominan Penyebab Keterlambatan Pelaksanaan Proyek Gedung Orphage Home Babakan Madang, Sentul-Bogor, Skripsi, Universitas Indonesia, Jakarta.
Saaty, T.L. (2008), Decision Making with the Analytic Network Process: Economic, Political and Technological Applications with Benefits, Opportunities, Costs and Risk, New York: Springer.
160 Salam, M. A. (2019), “Analyzing manufacturing strategies and Industry 4.0 supplier performance relationships from a resource-based perspective”, Benchmarking.
Sambasvian, M. dan Soon, Y.W. (2007), “Causes and Effects of Delays In Malaysia Construction Industry”, International Journal of Project Management Vol.
25 hal. 517-526.
Santosa, B. (2009), Manajemen Proyek Konsep dan Implementasi, Graha Ilmu.
Sari, Oryza Lhara. (2019), Model Pemilihan Metode Demolisi Bangunan Berbasis Expert System, Thesis, Institut Teknologi Sepuluh Nopember, Surabaya.
Shahteri, Y., Rausch, C., West, J., Haas, C. dan Nahangi, M. (2017). “Managing Risk in Modular Construction using Dimensional and Geometric Tolerance Strategies”, Journal Automation in Construction, Vol. 83 hal. 303-315.
Sianipar, Hasoloan Benget. (2012), Analisis Faktor – Faktor Penyebab Keterlambatan Penyelesaian Proyek Konstruksi Pengaruhnya Terhadap Biaya, Skripsi, Universitas Sebelas Maret, Surakarta.
Smith, Jim. T. (2007), “Are Passive Smoking, Air Pollution and Obesity a Greater Mortality Risk than Major Radiance Incidents?”, BMC Publich Health, Vol.
7 No. 49 hal. 1-22.
Soltani, M., Shakeri E. and Zarrati, A.R. (2018), “Development of A Risk Management Model for Power Tunnels Design Process”, Journal of Structural Integrity and Maintenance, Vol. 3 No. 1 hal. 67-74.
Sugiyono. (2010), Metode Penelitian Kuantitatif, Kualitatif dan R&D, Alfabeta, Bandung.
Sunjka, B.P. and Jacob U. (2013), “Significan Causes and Effects of Project Delays n the Niger Delta Region Nigeria”. SAIIE25 Procedding: Stellbosch. South Africa 2013 SAIIE.
Sundakarani, B., Kamran, R. Maheswari dan Jain V. (2019), “A Survey on Security Issues in Service Delivery Models of Cloud Computing”, Journal of Network and Computer Application, Vol. 34 No. 11 hal. 1-11.
Tjahjono, B. (2017), “What does Industry 4.0 Mean to Supply Chain?”, Procedia Manufacturing, Vol. 13 hal. 1175-1182.
161 Trauner, Tehodore J., William A. Manginelli., J. Scott Lowe., Mark F. Nagata dan Brian J. Furniss. (2009), Understanding Them Clearly Analyzing Them Correctly: Chapter 2 Construction Delays 2nd Edition hal. 25-36.
Turban, Efraim. (2011), Decision Support Systems and Intellegent System, Prentice Hall Inc., New Jersey.
Vaidya, S., Ambad, P., dan Bhosle, S. (2018), “Industry 4.0 – A Glimpse”, Procedia Manufacturing, hal. 233–238.
Van Thuyet, N., Ogunlana, S. O., dan Kumar Dey, P. (2007), “Risk management in oil and gas construction projects in Vietnam”, International Journal of Energy Sector Management, Vol. 1, No. 2, hal. 175–194.
Wang, S.Q., Dulaimi M.F. and Aguria, M.Y. (2014), “Risk Management Framework for Construction Projects in Developing Countries”, Construction Management and Economics, Vol. 22 No. 3 hal.s 237-252.
Wong, K. S., dan Kim, M. H. (2018), “Privacy protection for data-driven smart manufacturing systems”, Censorship, Surveillance, and Privacy: Concepts, Methodologies, Tools, and Applications, Vol. 4, No. 1, hal. 1721–1739.
Zou, P. X. W., Chen, Y., dan Chan, T. Y. (2010), “Understanding and improving your risk management capability: Assessment model for construction organizations”, Journal of Construction Engineering and Management, Vol. 136, No. 8, hal. 854–863.
