• Tidak ada hasil yang ditemukan

DESIGN AND BUILD A PROTECTION SYSTEM AND MONITORING OF THE USE OF ELECTRIC POWER ON A

N/A
N/A
Protected

Academic year: 2023

Membagikan "DESIGN AND BUILD A PROTECTION SYSTEM AND MONITORING OF THE USE OF ELECTRIC POWER ON A "

Copied!
1
0
0

Teks penuh

(1)

vii

DESIGN AND BUILD A PROTECTION SYSTEM AND MONITORING OF THE USE OF ELECTRIC POWER ON A

HOUSEHOLD SCALE BASED ON ARDUINO UNO

Name of Student : Riski

Nim : 3204161071

Advisor : Jefri Lianda, S.ST.,MT

ABSTRACT

A protection system device and monitoring of the use of electric power at scale loads have been made household in real time based on Atmega328P.

microcontroller. In performing its functions, the system using the on-off control action to perform protection with the relay module as an actuator, meanwhile The sensor uses a Hall effect ACS712-based current sensor and a ZMPT101b voltage sensor. The system also uses the GSM sim900 module to provide information and to monitor use of electric power. As a whole the system has been able to provide protection by means of disconnecting electric current when an overload occurs.

The system has also been able to monitor the use of electric power in a way displays power data on the LCD, and sends SMS to the operator.

Keywords: Arduino uno, Current sensor ACS712, Current Votage ZMPT101b, Module GSM SIM900.

Referensi

Dokumen terkait

implemented on prototype of web based home monitoring and lamps.. controlling based on

The method used in the design of the electric power system installation kit is to collect design and fabrication data in accordance with the literature study on electricity based on the

Table 2 Related Research of Air Quality System Related Research Sensor Board Monitor System Arduair: Air Quality Monitoring [24] MQ5 Arduino Uno Computer via USB Air Quality

vii TEMPERATURE AND HUMIDITY MONITORING SYSTEM FOR OYSTER MUSHROOM CULTIVATION BASED ON INTERNET OF THINGS IOT Name : Alvi Hafidza Riza NIM : 6103191328 Supervisor : Nurul

viii DESIGN AND ANALYSIS OF HEATER AND BLOWER CONTROLS ON KOPRA DRYER BASED ON ARDUINO UNO Name : Muhammad Sapikri Register Number : 3204161110 Supervisor : Muharnis, ST., MT

In this chapter we have followed-up the theory of Adapter 12V, Arduino Uno, Resistor , Flame Sensor , Gas/Smoke sensor MQ-2, Pump , Air Duct Fan, Solenoid Gas Valve, Relay , LED , GSM

In this study, predictions of battery power were carried out using the Arduino Uno microcontroller, the acs712 sensor as a battery voltage detector, and the python language to process

257 International Journal of Educational Review Volume 3 Issue 2 2021 Page 257-264 ISSN 2685-709X Online 2685-905X Print Simple Design and Build Automatic Transfer Switch