DESIGNING AND CREATING A SIMULATED CONTROLLER SYSTEM Page 97 of 167 FOR HANDLING STATION OF FESTO MODULAR PRODUCTION SYSTEM
AND ROBOT USING TECNOMATIX PLANT SIMULATION
Evan Petra REFERENCES
[1] H. K. Shivanand, Flexible Manufacturing System, 2006.
[2] Festo Didactic GmbH & Co., Modular Production System Distribution Station Manual, Denkendorf, 1999.
[3] Festo Didactic GmbH & Co., Modular Production System Testing Station Manuak, Denkendorf, 1998.
[4] Festo Didactic GmbH & Co., Modular Production System Processing Station Manual, Denkendorf, 1998.
[5] Festo Didactic GmbH & Co., Modular Production System Handling Station &
Industrial Robot Manual, Denkendorf, 1998.
[6] "Introduction to Socket Programming".
[7] MODICON Inc., Industrial Automation Systems, "Modicon Modbus Reference Guide," 1996.
[8] "GitHub," [Online]. Available:
https://github.com/cubieplayer/Cubian/wiki/GPIO-Introduction. [Accessed April 2014].
[9] F. Halsall, Data Communications, Computer Networks and Open System, Swansea, 1985.
[10] Festo Didactic GmbH & Co., "MPS® The Modular Production System,"
[Online]. Available: http://www.Festo-didactic.com/int-en/learning- systems/mps-the-modular-production-system/. [Accessed May 2014].
[11] V. A. Vosough S., "PLC and its Application," Department of Electronics Islamic Azad University, 2011.
[12] A. S. V. R. Theorin, "PLC and its Application".
[13] "Modbbus Application Protocol Specification".
[14] Acromag Incorporated, "INTRODUCTION TO MODBUS TCP/IP," 2005.
[15] A. W. Barr, "Analyzing Crosstalk and Ground Bounce in Multiconductor Systems Using SPICE Circuit Simulations," 1993.
[16] D. A. Muliacita, DESIGNING AND CONSTRUCTING A CONTROL
SYSTEM FOR EXISTING FESTO MPS DISTRIBUTION STATION USING TECNOMATIX PLANT SIMULATION 11, TANGERANG SELATAN, 2014.
