JURNAL ILMIAH

(1)

LEMBAR

HASIL PENILAIAN SEJAWAT SEBIDANG ATAU PEER REVIEW KARYA ILMIAH : JURNAL ILMIAH

Judul Jurnal Ilmiah (Artikel) : Identification of Plasmodium Falciparum Development Phase in Malaria Infected Red Blood Cells using Adaptive Color Segmentation and Decision Tree based Classification Nama/ Jumlah Penulis : Adi Pamungkas, Kusworo Adi dan Rahmat Gernowo/ 3 orang

Status Pengusul : Penulis ke- 2

Identitas Jurnal Ilmiah : a. Nama Jurnal : International Journal of Applied Engineering Research b. Nomor ISSN : 0973-4562

c. Vol, No., Bln Thn : 10, 2, 2015

d. Penerbit : Research India Publications e. DOI artikel (jika ada) : -

f. Alamat web jurnal : https://www.ripublication.com/Volume/ijaerv10n2.htm Alamat Artikel : https://eprints2.undip.ac.id/381/1/2015-

Identification%20of%20Plasmodium%20Falciparum%2 0Development%20Phase%20in%20Malaria%20Infecte d%20Red%20Blood%20Cells%20using%20Adaptive%

20Color%20Segmentation%20and%20Decision%20Tre e%20based%20Classification.pdf

g. Terindex : EBSCOhost, GOOGLE Scholar, JournalSeek, J-Gate, ICI, Index Copernicus IC Value 82.67

Kategori Publikasi Jurnal Ilmiah : √ Jurnal Ilmiah Internasional

(beri pada kategori yang tepat) Jurnal Ilmiah Nasional Terakreditasi Jurnal Ilmiah Nasional Tidak Terakreditasi Hasil Penilaian Peer Review :

Komponen Yang Dinilai Nilai Reviewer

Nilai Rata-rata Reviewer 1 Reviewer 2

a. Kelengkapan unsur isi jurnal (10%) 2,00 2,00 2,00

b. Ruang lingkup dan kedalaman pembahasan (30%)

5,90 5,50 5,70

c. Kecukupan dan kemutahiran

data/informasi dan metodologi (30%)

5,90 5,50 5,70

d. Kelengkapan unsur dan kualitas terbitan/jurnal (30%)

5,90 5,00 5,45

Total = (100%) 19,70 18,00 18,85

Semarang, 6 Mei 2020 Reviewer 1

Prof. Dr. Muhammad Nur, DEA NIP. 195711261990011001

Unit Kerja : Departemen Fisika - FSM UNDIP

Reviewer 2

Prof. Dr. Heri Sutanto, SSi, MSi NIP. 197502151998021001

Unit Kerja : Departemen Fisika - FSM UNDIP

(2)

LEMBAR

HASIL PENILAIAN SEJAWAT SEBIDANG ATAU PEER REVIEW KARYA ILMIAH : JURNAL ILMIAH

Judul Jurnal Ilmiah (Artikel) : Identification of Plasmodium Falciparum Development Phase in Malaria Infected Red Blood Cells using Adaptive Color Segmentation and Decision Tree based Classification Nama/ Jumlah Penulis : Adi Pamungkas, Kusworo Adi dan Rahmat Gernowo/ 3 orang

Status Pengusul : Penulis ke- 2

Identitas Jurnal Ilmiah : a. Nama Jurnal : International Journal of Applied Engineering Research b. Nomor ISSN : 0973-4562

c. Vol, No., Bln Thn : 10, 2, 2015

d. Penerbit : Research India Publications e. DOI artikel (jika ada) : -

f. Alamat web jurnal : https://www.ripublication.com/Volume/ijaerv10n2.htm Alamat Artikel : https://eprints2.undip.ac.id/381/1/2015-

Identification%20of%20Plasmodium%20Falciparum%2 0Development%20Phase%20in%20Malaria%20Infecte d%20Red%20Blood%20Cells%20using%20Adaptive%

20Color%20Segmentation%20and%20Decision%20Tre e%20based%20Classification.pdf

g. Terindex : EBSCOhost, GOOGLE Scholar, JournalSeek, J-Gate, ICI, Index Copernicus IC Value 82.67

Kategori Publikasi Jurnal Ilmiah : √ Jurnal Ilmiah Internasional

(beri pada kategori yang tepat) Jurnal Ilmiah Nasional Terakreditasi Jurnal Ilmiah Nasional Tidak Terakreditasi Hasil Penilaian Peer Review :

Komponen Yang Dinilai

Nilai Maksimal Jurnal Ilmiah

Nilai Akhir Yang Diperoleh Internasional

Nasional Terakreditasi

Nasional Tidak Terakreditasi

a. Kelengkapan unsur isi jurnal (10%) 2,00 2,00

b. Ruang lingkup dan kedalaman pembahasan (30%)

6,00 5,90

c. Kecukupan dan kemutahiran

data/informasi dan metodologi (30%)

6,00 5,90

d. Kelengkapan unsur dan kualitas terbitan/jurnal (30%)

6,00 5,90

Total = (100%) 20,00 19,70

Nilai Pengusul =

Catatan Penilaian artikel oleh Reviewer : 1. Kelengkapan unsur isi jurnal:

Penulisan Artikel ini telah sesuai dengan format International Journal of Applied Engineering Research. Latar belakang tak terungkap dengan jelas. Kebaruan dari artikel ini juga sudah diutarakan dengan ekspilsit

2. Ruang lingkup dan kedalaman pembahasan:

Arikel ditulis dengan ruang lingkup yang sempit. Pembahasan masih singkat dan sederhana. Belum ada diskusi yang membandingkan dengan hasil peneliti lain.

3. Kecukupan dan kemutakhiran data/informasi dan metodologi:

Referensi mutakhir. Metoda standard dan bisa direflikasi oleh ahli sebidang. Data telah cukup mutakhir dan pembahasan masih sangat kurang.

4. Kelengkapan unsur dan kualitas terbitan:

International Journal of Applied Engineering Research telah tdk terindek scopus 2011-2017 (cancelled). Jadi tergolong pada journal yang tidak terindeks scopus jadi nilai maksimumnya 20.

Semarang, 6 Mei 2020 Reviewer 1

Prof. Dr. Muhammad Nur, DEA NIP. 195711261990011001

Unit Kerja : Departemen Fisika - FSM UNDIP

√

(3)

LEMBAR

HASIL PENILAIAN SEJAWAT SEBIDANG ATAU PEER REVIEW KARYA ILMIAH : JURNAL ILMIAH

Judul Jurnal Ilmiah (Artikel) : Identification of Plasmodium Falciparum Development Phase in Malaria Infected Red Blood Cells using Adaptive Color Segmentation and Decision Tree based Classification Nama/ Jumlah Penulis : Adi Pamungkas, Kusworo Adi dan Rahmat Gernowo/ 3 orang

Status Pengusul : Penulis ke- 2

Identitas Jurnal Ilmiah : a. Nama Jurnal : International Journal of Applied Engineering Research b. Nomor ISSN : 0973-4562

c. Vol, No., Bln Thn : 10, 2, 2015

d. Penerbit : Research India Publications e. DOI artikel (jika ada) : -

f. Alamat web jurnal : https://www.ripublication.com/Volume/ijaerv10n2.htm Alamat Artikel : https://eprints2.undip.ac.id/381/1/2015-

Identification%20of%20Plasmodium%20Falciparum%2 0Development%20Phase%20in%20Malaria%20Infecte d%20Red%20Blood%20Cells%20using%20Adaptive%

20Color%20Segmentation%20and%20Decision%20Tre e%20based%20Classification.pdf

g. Terindex : EBSCOhost, GOOGLE Scholar, JournalSeek, J-Gate, ICI, Index Copernicus IC Value 82.67

Kategori Publikasi Jurnal Ilmiah : √ Jurnal Ilmiah Internasional

(beri pada kategori yang tepat) Jurnal Ilmiah Nasional Terakreditasi Jurnal Ilmiah Nasional Tidak Terakreditasi

Hasil Penilaian Peer Review :

Komponen Yang Dinilai

Nilai Maksimal Jurnal Ilmiah

Nilai Akhir Yang Diperoleh Internasional

Nasional Terakreditasi

Nasional Tidak Terakreditasi

a. Kelengkapan unsur isi jurnal (10%) 2,00 2,00

b. Ruang lingkup dan kedalaman pembahasan (30%)

6,00 5,50

c. Kecukupan dan kemutahiran

data/informasi dan metodologi (30%)

6,00 5,50

d. Kelengkapan unsur dan kualitas terbitan/jurnal (30%)

6,00 5,00

Total = (100%) 20,00 18,00

Nilai Pengusul =

Catatan Penilaian artikel oleh Reviewer : 1. Kelengkapan unsur isi jurnal:

Artikel telah ditulis secara lengkap sesuai template International Journal of Applied Engineering Research 2. Ruang lingkup dan kedalaman pembahasan:

Ruang lingkup kedalaman pembahasan diungkapkan dengan baik namun kurang mendalam. Perhitungan akurasi dari tabel 4.2 terkait nilai 83 tidak diinformasikan pada artikel.

3. Kecukupan dan kemutakhiran data/informasi dan metodologi:

Data penelitian yang diinformasikan pada artikel kategori cukup dan relevan dengan metodologi yang dilakukan.

Artikel didukung dengan 16 referensi, 4 referensi kategori tidak mutakhir. Hasil uji similaritas artikel baik yaitu 8%.

4. Kelengkapan unsur dan kualitas terbitan:

Secara umum kelengkapan unsur artikel lengkap, namun kualitas penerbit kurang baik, contoh tiba-tiba mulai persamaan 2.6, sementara persamaan 2.1 – 2.5 tidak ada. Masih ada kesalahan dalam penulisan pada tabel 4.1 yang seharusnya titik (.) ditulis koma (,), lalu ada pernyataan “Feature extraction results in Figure 4.2 (d) are shown …”

namun tidak ada gambar 4.2 (d). Hal ini menunjukkan editor tidak mencermati konsistensi penulisan sebelum diterbitkan. Jurnal IJAER ini pernah terindeks Scopus Q4 SJR 0.12 (tahun 2015) namun status cancelled (20112017).

Semarang, 6 Mei 2020 Reviewer 2

Prof. Dr. Heri Sutanto, SSi, MSi NIP. 197502151998021001

Unit Kerja : Departemen Fisika - FSM UNDIP

√

(4)

1/29/2020 IJAER, International Journal of Applied Engineering Research, Engineering Journals, Engineering Research Journal publisher in Ind…

https://www.ripublication.com/ijaer.htm 1/2

International Journal of Applied Engineering Research (IJAER)

Print ISSN 0973-4562 Online ISSN 0973-9769 Editor-in-Chief:

Prof. Dr. Eng. Ali MERDJI,

Faculty of Science and Technology, Route de Mamounia,

University of Mascara, B.P 305, Mascara (29000), Algeria.

Aims and Scope: The International Journal of Applied Engineering Research (IJAER) is an international research journal, which publishes top-level work from all areas of Engineering Research and their application including Mechanical, Civil, Electrical, Computer Science and IT, Chemical, Electronics, Mathematics, Environmental, Education Geological etc.

Researchers in all technology and engineering fields are encouraged to contribute articles based on recent research. Journal publishes research articles and reviews within the whole field of Engineering Research, and it will continue to provide information on the latest trends and developments in this ever-expanding subject.

Audience: Mechanical, computer, aeronautical, chemical, civil, electronics, mathematic, geology, electrical.

Submission: Authors are requested to submit their papers electronically to [email protected]

INDEXING: SCOPUS

(2010-2017)

, EBSCOhost, GOOGLE Scholar, JournalSeek, J-Gate, ICI, Index Copernicus IC Value 82.67 and UGC Approved Journal - 2017 (Journal No. - 64529) Publication Date and Frequency: Twenty four issues per year.

Publication Ethics and Publication Malpractice Statement

Editorial Board Members Vol. 1 No.1 No.2 No.3

⁽²⁰⁰⁶⁾

Vol. 2 No.1 No.2 No.3 No.4

⁽²⁰⁰⁷⁾

Vol. 3 No.1 No.2 No.3 No.4 No.5 No.6 No.7 No.8 No.9 No.10 No.11 No.12

⁽²⁰⁰⁸⁾

Vol. 4 No.1 No.2 No.3 No.4 No.5 No.6 No.7 No.8 No.9 No.10 No.11 No.12

⁽²⁰⁰⁹⁾

Vol. 5 No.1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21-22 23-24

⁽²⁰¹⁰⁾

(5)

1/29/2020 IJAER, International Journal of Applied Engineering Research, Engineering Journals, Engineering Research Journal publisher in Ind…

https://www.ripublication.com/ijaer.htm 2/2

Vol. 6 No.1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23-24

⁽²⁰¹¹⁾

Vol. 7 No.1 2 3 4 5 6 7 8 9 10 11 12

⁽²⁰¹²⁾

Vol. 8 No.1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

⁽²⁰¹³⁾

Vol. 9 No.1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

⁽²⁰¹⁴⁾

Vol.10 No.1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

⁽²⁰¹⁵⁾

Vol.11 No.1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

⁽²⁰¹⁶⁾

Vol.12 No.1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

⁽²⁰¹⁷⁾

Vol.13 No.1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

⁽²⁰¹⁸⁾

Vol.14 No.1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

⁽²⁰¹⁹⁾

Vol.15 No.1

⁽²⁰²⁰⁾

Special Issues

Authors Information Subscription

Call for Papers Other Journals

Library Recommendation Form

© All rights are reserved with Research India Publications Home Journals

Contact

(6)

1/29/2020 IJAER, Editorial Board Members, Journal Publishers,

https://www.ripublication.com/editorial_board_of_ijaer.htm 1/5

Research India Publications

International Journal of Applied Engineering Research (IJAER)

Editorial Board Members

Vincenzo Niola, Pofessor, Department Of Industial Engineering,, University Of Naples Federico Ii –

Engineering Faculty, Naples, Italy

Area of Interest : Mechanics, Robotics, Diagnostics Of Mechanical Systems, Non-Linear Analysis Of Mechanical Systems, Vibrations, Tribology

Rose Farahiyan Munawar, Senior Lecturer, Department Of Engineering Materials, Faculty Of

Manufacturing Engineering, Universiti Teknikal Malaysia Melaka

Area of Interest : Nanotechnology, Environmental And Green Materials, Cellulose Derivatives, Materials Characterization And Materials Science & Engineering

Ruaa Alsabah, Lecturer, Department Of Computer Science, Freha Campus, Kerbala University,

Kerbala, Iraq

Area of Interest : Internet Of Things & Big Data Analysis, Wireless Communication 4G, 5G And Beyond, Microwave Remote Sensing, Space-Borne – Airborne Platforms And Calibration And Validation Measurements.

Dr. Asim Datta, Associate Professor & Head, Dept. Of Electrical Engineering, Mizoram University ( A

Central University), Tanhril, Aizawl-796004, Mizoram

Area of Interest : Electical Pewer Systems, Renewable Energy Sources, Embedded Systems

Pranav Mahamuni, Research Assistant, Department Of Mechanical Engineering, Stony Brook

University, Stony Brook, New York, United States Of America

Area of Interest : Mechanical Engineering - Cad/Cam, Product Design, Rapid Prototyping, Finite Element Analysis

Dr. Diego Bellan, Professor, Department Of Electronics, Information And Bioengineering,

Politecnico Di Milano, Piazza Leonardo Da Vinci 32, 20133, Milan, Italy

Area of Interest : Power Quality, Electromagnetic Compatibility

Dr. Claudia Espro, Assistant Professor, Department Of Engineering, Contrada Di Dio, 4° Piano,

Blocco C, 98166 Messina, Italy

Area of Interest : Heterogeneous Catalysis And Development Of Novel Catalytic Green Processes.

Catalytic Conversion Of Natural Gas And Light Alkanes Into Intermediates, Fuels And Chemicals Of Higher Added Value. Conversion Of Renewable Biomass For The Production Of Bulk Chemicals, Electrochemical Sensors

Dr. Massila Kamalrudin, Deputy Dean, Associate Professor, Faculty of Information Technology and

Communication , Institute of Technology Management and Enterpreneurship, Universiti Teknikal Malaysia Melaka Malaysia

Area of Interest : ICT, software engineering

Dr. Nilamadhab Mishra, Assistant Professor, School Of Computing, Debre Berhan University,

Ministry of Education, Government of Ethiopia.

Area of Interest : Encompass Network Centric Data Management, Data

Science: - Analytics and Applications, CIoT Big-Data System, and Cognitive Apps Design &

Explorations.

Dr. Liew Pay Jun, Senior Lecturer, Department Of Manufacturing Process, Faculty Of Manufacturing

Engineering, Universiti Teknikal Malaysia Melaka, Durian Tunggal, Melaka, Malaysia.

Area of Interest : Electrical discharge machining, machining, micro/nano machining, nanofluid

Dr. G.PARAMASIVAM , Associate Professor, Department Of Computer Science, KG COLLEGE OF

ARTS AND SCIENCE, Tamil nadu, India.

(7)

Area of Interest : Image processing, Computer Network

Dr. Ch. Swapna Priya, Assistant Professor, Department Computer Sceince And Engineering,

Vignan's institute of Information Technology, Visakhapatnam, Andhra Pradesh, India.

Area of Interest : Image processing, Pattern recognition deep learning, machine learning

Dr. K. Sangeetha, Assistant Professor, Department Of Computer Science & Engineering, SNS

College of Technology, Coimbatore, Tamilnadu, India.

Area of Interest : Theory of computation, Computer Networks, Advanced Computer Architecture, Operating Systems, Computer Programming, Network Security, Object Oriented Analysis and Design and Data Base Management System

Dr. Deepali Gupta, Professor And Head, Department Of Computer Sceince & Engineering,

Maharishi Markandeshwar University, Sadopur, Sadopur, Ambala, India.

Area of Interest : Computer Engineering & Information Technology, Software Engineering, Genetic Algorithms and Cloud Computing

Dr. Ghassan Fadhil Smaisim, Associate Professor, Department of Mechanical Engineering,

University of Kufa, Faculty of Engineering, Kufa, P.O. Box: 21, Najaf Government.

Area of Interest : Enhancement Heat Transfer, Renewable Energy, Fluid Mechanics, Thermal Nanofluid Flow, Power Generation, Solar Energy, CFD.

Dr. Darshankumar Chandrakant Dalwadi, Associate Professor, Department of Electronics and

Communication Department, Birla Vishvakarma Mahavidyalaya Engineering College, Post Box No. 20 Area of Interest : Digital Communication, Wireless Communication and M Tech Information Theory and Coding

_

Jong-Wook Lee, Electrical & Computer Engineering, Ajou University, Worldcupro 206, Yeongtong-

gu. 16499, Geonggi-do, South Korea

Area of Interest: l Device structure and materials for sub-0.5V voltage operation, l Scaling-down enabling technology, l Low-power, high-speed devices and circuits.

Mohd Hafiz bin Jali, Faculty of Electrical Engineering, Universiti Teknikal Malaysia Melaka, Hang

Tuah Jaya, 76100, Melaka, Malaysia

Area of Interest: Control system, Signal Processing, Rehabilitation, Human assist technology.

Pattern Recognition, Robotic.

Timon Rabczuk, Chair of Computational Mechanics, Bauhaus University Weimar, Marienstrasse 15, 99423 Weimar, Germany

Hacene Mahmoudi, Vice Rector for Animation, promotion of scientific research, Hassiba Benbouali University, B.P. 151, Chlef, Algeria

Mircea Cristian DUDESCU, Technical University of Cluj-Napoca, Faculty of Mechanical

Engineering, Departament of Mechanical Engineering, B-dul Muncii 103-105, 400641 Cluj-Napoca,

Romania

Area of interest: mechanics of materials, experimental mechanics, mechanical testing, structural analysis of MEMS.

Rajeev Ahuja, Physics Department, Uppsala University,Box 530, 751 21 Uppsala, Sweden

Area of interest: Computational Materials Science, Electronic Materials, Spintronics, High pressure, Dynamics.

Shigeru Aoki, Department of Mechancial Engineering, Tokyo Metropolitan College of Technology, Shinagawa-ku, Tokyo 140-0011, Japan

Area of Interest: Random vibration, Seismic response of mechanical system, Approximate analysis of nonlinear vibration.

G.Q. Chen, Department of Mechanics and Engineering science, Peking University,Beijing 100871,

China

(8)

Area of Interest: CFD (Computational fluid dynamics),energy and resources engineering, and systems ecology.

Anna Laura Pisello, Department of Engineering, CIRIAF – Interuniversity Research Center, University of Perugia, Italy

Dr. Jahar Sarkar, Department of Mechanical Engineering, IIT (BHU) Varanasi, UP-221005, India Area of Interest: Energy, Thermal & Fluid Engineering.

Verena Kantere, Centre Universitaire d’ Informatique, University of Geneva, Bâtiment A, Route de Drize 7, 1227 Carouge, Switzerland

Kong Fah TEE, Department of Engineering Science, University of Greenwich, Central Avenue, Chatham Maritime, Kent ME4 4TB United Kingdom

Area of Interest: Structural Health Monitoring and Management, Structural System Identification and Life Prediction, Forensic Engineering.

B.T.F. Chung, Department of Mechanical Engineering, University of Akron, Akron, Ohio 44325, USA Area of interest: Heat Transfer with Phase Changes, Optimum Design of Extended Surfaces, Radiative Heat Transfer System.

Marcelo J.S. De Lemos, Departamento de Energia - IEME, Instituto Tecnologico deAeronautica - ITA, 12228-900 Sao Jose dos Campos S.P. - Brazil

Area of interest: Turbulence Modeling, Porous Media, Combustion in Porous Media, Numerical Methods, Finite Volume.

Dimitris Drikakis, Head of Aerospace Sciences Department, Cranfield University, School of Engineering, Cranfield, MK43 0AL, United Kingdom

Area of Interest: Computational Fluid Dynamics, Aerodynamics, Turbulence Gas dynamics, Computational Nanotechnology.

A.S. Al-Harthy, Department of Civil, Surveying and Environmental Engineering, University of Newcastle, Callaghan, NSW 2308 Australia

Area of interest: Concrete material and durability, Recycling construction materials, reliability assessment of structures.

S.Z. Kassab, Mechanical Engineering Department, Faculty of Engineering, Alexandria University, Alexandria, 21544 Egypt

Area of Interest : Experimental Fluid Mechanics,Lubrication, Energy, Environment and Pollution.

Bashar El-Khasawneh, Chairman, Industrial Engineering Department, JUST, P.O. Box 3030, Irbid 22110 Jordan

Area of Interest: Design process and manufacturing-related sciences and processes, advanced and parallel kinematics machine tools.

Kazuhiko Kudo, Laboratory of Micro-Energy Systems, Division of Human Mechanical Systems and Design, Graduate School of Engineering, Hokkaido University, Japan

Area of interest: Radiative heat transfer analysis, transient analysis on surface tension.

Carlos Mario Morales Bautista, Calzada Olmeca 105. Cerrada Chiltepec No. 1. Fraccionamiento la

Venta. Villa Parrilla II. C.P. 86280. Villahermosa, Centro, Tabasco, Mexico

(9)

Ihab Obaidat, Department Of Physics, College of Science, United Arab Emirates University, P.O.

Box 15551, Al Ain, UAE

Area of Interest: Nanomagnetism, Superconductivity.

Huihe QIU, Department of Mechanical Engineering,The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon Hong Kong

Area of Interest: Transport phenomena in microscale multiphase flows,mciro sensors and actuators, optical diagnostics and instrumentation.

S.A. Soliman, Electrical Engineering Department, University of Qatar, P. O. Box 2713 Doha Qatar Area of Interest: Applications of State Estimation to Electric Power Systems, Fuzzy and Neural System Applications to Electric Power Systems.

Dimitri V. Val, Dept. of Structural Engineering, Faculty of Civil and Environmental Engineering, Technion - Israel Institute of Technology, Haifa 32000, Israel

Area of Interest: structural safety and reliability; analysis, design, and assessment of reinforced concrete and steel structures.

Guo-Xiang Wang, Department of Mechanical Engineering, The University of Akron, AkronOH 44325-3903 USA

Area of Interest: Heat and Mass Transfer, Materials Processing, Solidification Theory and Application.

Samir Mekid, Mechanical Engineering Department, King Fahd University of Petroleum and Minerals PO Box 155, Dhahran, 31261, Saudi Arabia

Abdul Razak Rehmat, Department of Bioprocess & Polymer Engineering, Faculty of Chemical &

Energy Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Malaysia

Area of Interest: Polymer Processing and Rheology, Biobased Polymer Composite, Microwave Processing of Polymer.

V.R. Mudinepalli, Department of Physics, National Taiwan Normal University, Taipei, 11677,

Taiwan.

Damodar Maity,

Civil Engineering Department Indian Institute of Technology, Kharagpur, West Bengal, India

Area of Interest: Damage Assessment of Structures; Seismic Resistant of Structures; Fluid- Structure Interaction; Sloshing; Concrete Gravity Dam.

NG EYK, School of Mechanical & Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, 639798 Singapore

Area of Interest: biomedical engg; computational fluid dynamics and numerical heat transfer.

Mohammad Luqman,

Chemical Engineering Department King Saud University Chemical Engineering Department, Riyadh, Saudi Arabia

Area of Interest: Polymer Nanocomposites, Polymer/Plastic, Ionomers, Nanocomposites.

Mohammad Valipour, Department of Irrigation and Drainage Engineering, College of Abureyhan,

University of Tehran, Pakdasht, Tehran, Iran

Area of Interest: Surface and pressurized irrigation, Drainage engineering, Fluid mechanics, Heat transfer in soil media.

Najm Obaid Salim Alghazali, Department of Civil Engineering, Babylon University, Hilla, Babylon, Iraq

(10)

Area of Interest: Hydraulic Structures, Hydraulics, Engineering Hydrology, Groundwater Hydrology, Dams Engineering.

Sushant K. Singh, Earth and Environmental Studies Department, Montclair State University,

Montclair, 07043, New Jersey, USA

Area of Interest: Environmental pollution, Environmental management, Environmental toxicology, Environmental policy.

Hongseok Choi, Department of Mechanical Engineering, Clemson University, 205 Fluor Daniel Bldg.

Clemson, SC 29634 USA

Ling Zhou, National Research Center of Pumps, Jiangsu University, No.301 Xuefu Road, Zhenjiang, Jiangsu 212013, China

Area of Interest : Fluids Engineering, Multiphase flow, CFD (Computational Fluid Dynamics).

Dr. Jongwan Kim, Al-Farabi Kazakh National University, Almaty, Kazakhstan, Senior Lecturer Area of Interest : Computer and network security, it management, digital forensics, cryptocurrency, blockchain

Marlen Bissaliye, Al-Farabi Kazakh National University, Almaty, Kazakhstan, Senior Lecturer

Area of Interest : Computer and network security, it management, digital forensics, cryptocurrency, blockchain

[UP]

© All rights are reserved with Research India Publications Home Journals

Contact

(11)

1/29/2020 International Journal of Applied Engineering Research

https://www.scimagojr.com/journalsearch.php?q=21100217234&tip=sid&clean=0 1/11

also developed by scimago: SCIMAGO INSTITUTIONS RANKINGS

Scimago Journal & Country Rank

Home Journal Rankings Country Rankings Viz Tools Help About Us

International Journal of Applied Engineering Research

Country India - SIR Ranking of India

25

H Index

Subject Area and

Category Engineering

Engineering (miscellaneous) Publisher Research India Publications Publication type

Journals

ISSN

09734562

Coverage

2011-2017 (cancelled)

Scope

The International Journal of Applied Engineering Research (IJAER) is an international research journal, which publishes top-level work from all areas of Engineering Research and their application including Mechanical, Civil, Electrical, Computer Science and IT, Chemical, Electronics, Mathematics, Environmental, Education Geological etc. Researchers in all technology and engineering elds are encouraged to contribute articles based on recent research. Journal publishes research articles and reviews within the whole eld of Engineering Research, and it will continue to provide information on the latest trends and developments in this ever-expanding subject.

Homepage

How to publish in this journal Contact

Join the conversation about this journal

Enter Journal Title, ISSN or Publisher Name

Quartiles

The set of journals have been ranked according to their SJR and divided into four equal groups, four quartiles. Q1 (green) comprises the quarter of the journals with the highest values, Q2 (yellow) the second highest values, Q3 (orange) the third highest values and Q4 (red) the lowest values.

Category Year Quartile

Engineering (miscellaneous) 2009 Q3 Engineering (miscellaneous) 2010 Q3 Engineering (miscellaneous) 2011 Q4 Engineering (miscellaneous) 2012 Q4

SJR Year SJR

Citations per document

2009 2010 2011 2012 2013 2014 2015 2016 2017 2018

Engineering (miscellaneous)

(12)

1/29/2020 International Journal of Applied Engineering Research

https://www.scimagojr.com/journalsearch.php?q=21100217234&tip=sid&clean=0 2/11

Year SJR Year SJR

2009 0.125 2010 0.134 2011 0.106 2012 0.111 2013 0.115 2014 0.116 2015 0.125 2016 0.143

This indicator counts the number of citations received by documents from a journal and divides them by the total number of documents published in that journal. The chart shows the evolution of the average number of times documents published in a journal in the past two, three and four years have been cited in the current year.

The two years line is equivalent to journal impact factor

™ (Thomson Reuters) metric.

Cites per document Year Value

Cites / Doc. (4 years) 2008 0.000 Cites / Doc. (4 years) 2009 1.000 Cites / Doc. (4 years) 2010 2.000 Cites / Doc. (4 years) 2011 0.600 Cites / Doc. (4 years) 2012 0.049 Cites / Doc. (4 years) 2013 0.042 Cites / Doc. (4 years) 2014 0.124 Cites / Doc. (4 years) 2015 0.146 Cites / Doc. (4 years) 2016 0.148 Cites / Doc. (4 years) 2017 0.192

Total Cites Self-Cites

Evolution of the total number of citations and journal's self-citations received by a journal's published documents during the three previous years.

Journal Self-citation is de ned as the number of citation from a journal citing article to articles published by the same journal.

Cites Year Value

S lf Cit 2008 0

External Cites per Doc Cites per Doc

Evolution of the number of total citation per document and external citation per document (i.e. journal self- citations removed) received by a journal's published documents during the three previous years. External citations are calculated by subtracting the number of self-citations from the total number of citations received by the journal’s documents.

Cit Y V l

% International Collaboration

International Collaboration accounts for the articles that have been produced by researchers from several countries. The chart shows the ratio of a journal's documents signed by researchers from more than one country; that is including more than one country address.

Year International Collaboration

2008 0.00

2009 0

Citable documents Non-citable documents

Not every article in a journal is considered primary research and therefore "citable", this chart shows the ratio of a journal's articles including substantial research (research articles, conference papers and reviews) in three year windows vs. those documents other than research articles, reviews and conference papers.

Documents Year Value

N it bl d t 2008 0

Cited documents Uncited documents

Ratio of a journal's items, grouped in three years windows, that have been cited at least once vs. those not cited during the following year.

Documents Year Value

Uncited documents 2008 0 Uncited documents 2009 0 Uncited documents 2010 0 Uncited documents 2011 3

← Show this widget in your own website

Just copy the code below and paste within your html code:

<a href="https://www.scimag

Cites / Doc. (4 years) Cit / D (3 )

2008 2010 2012 2014 2016 2018

0 0.4 0.8 1.2 1.6 2

2008 2010 2012 2014 2016 2018

0 2k 4k

2008 2010 2012 2014 2016 2018

0 1 2

2008 2010 2012 2014 2016 2018

0 4 8

2008 2010 2012 2014 2016 2018

0 7k 14k

2008 2010 2012 2014 2016 2018

0 7k 14k

(13)

Author details

1 of 1

◅ Return to search results

Adi, K.

Author ID: 57200265615

Aﬃliation(s):

, Semarang, Indonesia



http://orcid.org/0000-0002-7702-6554



Universitas Diponegoro View more



View potential author matches

Other name formats: Adi, K. Adi, Kusworo

Subject area: Computer Science Engineering Physics and Astronomy Environmental Science Social Sciences Energy Mathematics Medicine Earth and Planetary Sciences Decision Sciences

Health Professions ^{View all}



Documents by author

35

Analyze author output

Total citations

66

^by⁵¹^documents

View citation overview

h-index:

4

❓

View h-graph

Document and citation trends:

Years

Documents Citations Documents

Citations

2006 2020

0 8

0 21

Proﬁle actions



Edit author proﬁle Connect to ORCID❓



^Alerts

Set citation alert Set document alert

❓

Learn more about Scopus Proﬁles

↗

KA

Universitas Diponegoro 35 Documents

K. Adi

⬈

Is this you?

Sort on:

Document title Authors Year Source Cited by

, ,

, (...), ,

2019

185(1), pp. 42-49

0

Open Access

, , 2019

125,22006

0

35 Documents Cited by 51 documents 48 co-authors Topics

▻

View in search results format View 394 references ▻ Date (newest) 

Export all Add all to list Set document alert Set document feed

A SIMPLIFIED METHOD for the WATER-EQUIVALENT DIAMETER CALCULATION to ESTIMATE PATIENT DOSE in CT EXAMINATIONS

Anam, C. Arif, I. Haryanto, F. Adi, K. Dougherty, G.

Radiation Protection Dosimetry



View abstract View at Publisher Related documents

System of Performance Evaluation of Rice Paddy Production with Data Envelopment Analysis

Hidayah, Q.H. Mustaﬁd Adi, K.

E3S Web of Conferences



Brought to you by Universitas Diponegoro

Search Sources Lists SciVal ↗ Create account Sign in

(14)

Open Access

, ,

, (...), ,

2019

25(3), pp. 179-187

0

, ,

, (...), ,

2019

39(3), pp. 783-793

Open Access

, 2019

1217(1),12033

0

Open Access

,

, , ,

2019

1217(1),12032

0

Open Access

, ,

, (...), ,

2019

1217(1),12036

0

, , 2019 Proceeding - 2019 International Conference of Artiﬁcial Intelligence and Information Technology, ICAIIT 2019

8834622, pp. 255-259

0

Open Access

, , 2018

73,13004

0

, , 2018 2018 International Seminar on Research of Information Technology and Intelligent Systems, ISRITI 2018

8864330, pp. 459-464

0

, ,

,

2018

1977,020007

0

Open Access

, ,

2018

1025(1),012025 Automated MTF measurement in CT images with a simple wire

phantom

Anam, C. Fujibuchi, T.

Haryanto, F. Muhlisin, Z. Dougherty, G.

Polish Journal of Medical Physics and Engineering



Assessment of patient dose and noise level of clinical CT images:

Automated measurements

Anam, C. Budi, W.S. Adi, K. Fujibuchi, T.

Dougherty, G.

Journal of Radiological Protection 4



Finger edge contour perimeter as a biometric based identiﬁcation system

Widodo, C.E. Adi, K. Journal of Physics: Conference Series



Richardson number model for turbulence motion analysis around airport runway

Gernowo, R. Saputro, H.D. Setiawan, A. Adi, K.

Widodo, A.P.

Journal of Physics: Conference Series



Detecting driver drowsiness using total pixel algorithm Adi, K. Widodo, A.P.

Widodo, C.E. Naqiyah, S. Aristia, H.N.



Determining the Threshold Value for Identiﬁcation of the Goblet Cells in Chicken Small Intestine

Sepriana, D. Adi, K.

Widodo, C.E.



Information System Prediction with Weighted Moving Average (WMA) Method and Optimization Distribution Using Vehicles Routing Problem (VRP) Model for Batik Product

Nugrahani, T.A. Adi, K.

Suseno, J.E.



Logic scoring of preference method for determining landﬁll with geographic information system

Pirmanto, D. Suseno, J.E.

Adi, K.



Design of crack detection system for concrete built infrastructure based on ﬁber optic sensors

Hidayah, F.N. Budi, W.S.

Adi, K. Supardjo

AIP Conference Proceedings



Automatic vehicle counting using background subtraction method on gray scale images and morphology operation

Adi, K. Widodo, A.P.

Widodo, C.E. Pamungkas, A. Putranto, A.B.

Journal of Physics: Conference Series 1



(15)

Open Access

, ,

2018

1025(1),012023

Open Access

, , 2018

31,11007

Open Access

, , 2018

31,10006

0

, ,

, (...), ,

2018

11(2), pp. 8-12

, , 2017

23(7), pp. 6593-6597

, ,

,

2017

23(7), pp. 6618-6622

0

Open Access

, , 2017

855(1),012063

0

, , 2017 Proceedings - 2016 3rd International Conference on Information Technology, Computer, and Electrical Engineering, ICITACEE 2016 7892450, pp. 253-259

Hazard mitigation with cloud model based rainfall and convective data

Gernowo, R. Adi, K.

Yulianto, T. Seniyatis, S.

Yatunnisa, A.A.

Journal of Physics: Conference Series 1



Application Mail Tracking Using RSA Algorithm As Security Data and HOT-Fit a Model for Evaluation System

Permadi, G.S. Adi, K.

Gernowo, R.

E3S Web of Conferences 3



The Decision Support System (DSS) Application to Determination of Diabetes Mellitus Patient Menu Using a Genetic Algorithm Method

Zuliyana, N. Suseno, J.E.

Adi, K.



Detection lung cancer using Gray Level Co-Occurrence Matrix (GLCM) and back propagation neural network classiﬁcation

Adi, K. Widodo, C.E.

Widodo, A.P.

Pamungkas, A. Syifa, R.A.

Journal of Engineering Science and Technology Review

3



View abstract Related documents

Convective cloud model for analyzing of heavy rainfall of weather extreme at Semarang Indonesia

Gernowo, R. Adi, K.

Yulianto, T.

Advanced Science Letters 2



Beef marbling identiﬁcation using color analysis and decision tree classiﬁcation

Adi, K. Pujiyanto, S.

Nurhayati, O.D.

Pamungkas, A.

Advanced Science Letters



Calculation of Lung Cancer Volume of Target Based on Thorax Computed Tomography Images using Active Contour Segmentation Method for Treatment Planning System

Yosandha, F.P. Adi, K.

Widodo, C.E.



Detection of the beef quality: Using mobile-based K-mean clustering method

Nurhayati, O.D. Adi, K.

Pujiyanto, S.

2



Display: 20  results per page 1 2  Top of page

The data displayed above is compiled exclusively from documents indexed in the Scopus database. To request corrections to any inaccuracies or provide any further feedback, please use the Author Feedback Wizard .

About Scopus

What is Scopus Content coverage Scopus blog Scopus API

Language

⽇本語に切り替える切换到简体中文切換到繁體中文 Русский язык

Customer Service

Help Contact us

(16)

Document details

References (16)

29 of 35

Identiﬁcation of plasmodium falciparum development phase in malaria infected red blood cells using adaptive color segmentation and decision tree based classiﬁcation

^(Article)

, ,

Department of Physics, Diponegoro University, Semarang, Indonesia

Abstract

Malaria is a medical emergency that must be treated immediately at this time because it has been infecting millions of people in 90 countries every year. Malaria is caused by a parasite that infects red blood cells transmitted through the bite of Anopheles. One species of plasmodium causing malaria is plasmodium falciparum. This type of plasmodium can lead to malaria tertian which is a malignant malaria type and threatening the life of its sufferer. This study aims to design a system capable of identifying the development phase of plasmodium falciparum in red blood cells with adaptive color segmentation and decision tree based classification. Color segmentation process in this study is done by converting the original image color space based on the color components of RGB (Red, Green, Blue) to HSV color space (Hue, Saturation, Value) then thresholding against Saturation component. The used morphological parameters to distinguish the type of plasmodium falciparum development phase are the area ratio and eccentricity. While the classification process is performed using decision tree algorithm results in 87.67% of accuracy. © Research India Publications.

SciVal Topic Prominence

Topic:

Prominence percentile: 93.841

Author keywords

Adaptive color segmentation Decision tree algorithms Malaria Plasmodium falciparum

Hirimutugoda, Y.M., Wijayarathna, G.

2010. Image Analysis System for Detection of Red Cell Disorders using Artiﬁcial Neural Networks (2010) Sri Lanka Journal of Bio-Medical Informatics, 1 (1), pp. 35-42. .

◅ Back to results ◅ Previous Next ▻



^Export



^Download



^Print



^E-mail



Save to PDF

⋆

Add to List ^More...

▻

International Journal of Applied Engineering Research Volume 10, Issue 2, 2015, Pages 4043-4056

Pamungkas, A. Adi, K. Gernowo, R.



View references (16)



Blood | Cytology | Smear images



ISSN: 09734562 Source Type: Journal Original language: English

Document Type: Article

Publisher: Research India Publications

▻ View in search results format All Export



Print



E-mail



Save to PDF Create bibliography

1

Cited 31 times

PlumX Metrics

Usage, Captures, Mentions, Social Media and Citations beyond Scopus.

Metrics

8

Citations in Scopus

88th percentile

2.09

Field-Weighted Citation Impact

Cited by 8 documents

, ,

(2019) 2019 7th International Conference on Cyber and IT Service Management, CITSM 2019

, ,

(2018) Translational Research

, ,

(2018) Journal of Engineering Science and Technology Review

Inform me when this document is cited in Scopus:

Brought to you by Universitas Diponegoro

Search Sources Lists SciVal ↗ Create account Sign in

(17)

Sio, S.W.S., Sun, W., Kumar, S., Bin, W.Z., Tan, S.S., Ong, S.H., Kikuchi, H., (...), Tan, K.S.W.

(2007) Journal of Microbiological Methods, 68 (1), pp. 11-18. . doi: 10.1016/j.mimet.2006.05.017

Das, D.K., Ghosh, M., Pal, M., Maiti, A.K., Chakraborty, C.

(2013) Micron, 45, pp. 97-106. . doi: 10.1016/j.micron.2012.11.002

Adi, K., Pujiyanto, S., Gernowo, R., Pamungkas, A., Putranto, A.B.

(2014) International Journal of Applied Engineering Research, 9 (22), pp. 13917-13924. .

Adi, K., Pujiyanto, S., Gernowo, R., Pamungkas, A., Putranto, A.B.

Automatic Thresholding with Otsu’s Method to Identify Plasmodium falciparum Phase in Malaria-infected Red Blood Cells

(2014) The 4Th International Conference on Theoretical and Applied Physics (ICTAP-2014). . 16-17 October 2014, Denpasar-Bali, Indonesia

Savkare, S.S., Narote, S.P.

Automatic Classiﬁcation of Normal and Infected Blood Cells for Parasitemia Detection

(2011) IJCSNS International Journal of Computer Science and Network Security, 11 (2). . February 2011

Savkare, S.S., Narote, S.P.

Automatic System for Classiﬁcation of Erythrocytes Infected with Malaria and Identiﬁcation of parasite’s life Stage

(2012) Procedia Technology, 6, pp. 405-410. .

Tilley, L., Dixon, M.W.A., Kirk, K.

(2011) International Journal of Biochemistry and Cell Biology, 43 (6), pp. 839-842. . doi: 10.1016/j.biocel.2011.03.012

Ledley, R.S., Buas, M., Golab, T.J.

(1990) Proceedings - International Conference on Pattern Recognition, 1, pp. 791-795. . ISBN: 0818620625

2

MalariaCount: An image analysis-based program for the accurate determination of parasitemia

3

Machine learning approach for automated screening of malaria parasite using light microscopic images

Cited 73 times

View at Publisher

4

Identiﬁcation of plasmodium falciparum phase in red blood cells using artiﬁcial neural networks

Cited 9 times http://www.ripublication.com/ijaer%208/ijaerv9n22_163.pdf

5

Cited 2 times

6

Cited 15 times

7

Cited 29 times

8

The Plasmodium falciparum-infected red blood cell

Cited 57 times http://www.elsevier.com/locate/biocel

View at Publisher

9

Fundamentals of true-color image processing

Cited 66 times

View at Publisher

, ,

(2016) International Journal of Applied Engineering Research

, ,

(2017) 2017 International Conference on Advances in Computing, Communications and Informatics, ICACCI 2017

, ,

(2014) International Journal of Applied Engineering Research

Find more related documents in Scopus based on:

cells using adaptive color segmentation and back propagation neural network Adi, K. Pujiyanto, S. Gernowo, R.

Characteristics determination of infected erithrocytes by plasmodium falciparum as a diagnostic of malaria, based on microscopic images

Muhimmah, I. Harniawati, N.

Lusiyana, N.

Identiﬁcation of plasmodium falciparum phase in red blood cells using artiﬁcial neural networks

Adi, K. Pujiyanto, S. Gernowo, R.

View all related documents based on references

▻

Authors Keywords ▻

(18)

29 of 35 Acharya, T., Ray, A.K.

(2005) Image Processing: Principles and Applications, pp. 1-426. . ISBN: 978-047171998-4

doi: 10.1002/0471745790

Gonzalez, R.C., Woods, R.E.

(2004) Digital Image Processing Second Edition. . New Jersey: Pearson Prentice Hall

Adi, K., Gernowo, R., Sugiharto, A., Firdausi, K.S., Pamungkas, A., Putrato, A.B.

Tuberculosis (TB) Identiﬁcation in The Ziehl-Neelsen Sputum Sample in NTSC Channel and Support Vector Machine (SVM) Classiﬁcation

(2013) International Journal of Innovative Research in Science, Engineering and Technology, 2 (9).

.

Adi, K., Gernowo, R., Sugiharto, A., Pamungkas, A., Putranto, A.B., Mirnasari, N.

Autothresholding Segmentation for Tuberculosis Bacteria Identiﬁcation in the Ziehl-Neelsen Sputum Sample

(2013) The 7Th International Conference on Information & Communication Technology and Systems

(ICTS). .

2013, ITS, May 15-16, 2013, Bali

Quinlan, J.R.

(Open Access)

(1986) Machine Learning, 1 (1), pp. 81-106. . doi: 10.1023/A:1022643204877

Quinlan, J.R.

(1996) Journal of Artiﬁcial Intelligence Research, 4, pp. 77-90. .

Tan, P., Steinbach, M., Kumar, V.

(2006) Introduction to Data Mining. . New York: Pearson Education

10

Image Processing: Principles and Applications

Cited 535 times http://onlinelibrary.wiley.com/book/10.1002/0471745790

View at Publisher

11

Cited 32043 times

12

Cited 11 times

13

Cited 7 times

14

Induction of Decision Trees

Cited 9980 times

View at Publisher

15

Improved use of continuous attributes in C4.5

16

Cited 6009 times

◅ Back to results ◅ Previous Next ▻  Top of page

About Scopus

What is Scopus Content coverage Scopus blog Scopus API

Language

⽇本語に切り替える切换到简体中文切換到繁體中文 Русский язык

Customer Service

Help Contact us

(19)

Privacy matters

We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the .

Terms and conditions ↗ Privacy policy ↗ Elsevier B.V ↗

use of cookies