• Tidak ada hasil yang ditemukan

Modeling and Design Optimization of Folding Table Frame Using SolidWorks

N/A
N/A
Info
Unduh - Bebas
Protected

Academic year: 2023

Membagikan "Modeling and Design Optimization of Folding Table Frame Using SolidWorks"

Copied!
3
0
0

Memuat.... (Lihat teks lengkap sekarang)

Unduh sekarang ( 3 Halaman )

Teks penuh

(1)

MODELING AND DESIGN OPTIMIZATION OF FOLDING TABLE FRAME

USING SOLIDWORKS SOFTWARE Page 59 of 63

Eduardo Ardita REFERENCES

[1] Riska, A. (2014). Denah Rumah Minimalis Sederhana Type 3. [online]

Available at: http://edesainminimalis.com/denah-rumah-minimalis-type-36-1- dan-2-lantai/denah-rumah-minimalis-sederhana-type-36/ [Accesed 11 Aug.

2018].

[2] Wickens, Gordon, Liu, (1997): An Introduction to Human Factors Engineering.

[3] Greenlandmetal. (2017). [online] Available at: http://greenlandmetal.com/wp- content/uploads/2016/12/industrial-aluminum-profile-greenland-metal.jpg [Accesed 14 July 2018].

[4] G. Serkan, K. Hira. 2016. Finite Element Analysis of Structures with Extruded Aluminum Profiles Having Complex Cross Sections. Latin American Journal of Solids and Structures vol.13 no.8.

[5] Neufert, P., Ernst., (2000): Architect’s Data, Blackwell Science Ltd, Oxford.

[6] Ivanoff, Val., (2009): Engineering Mechanics, McGraw-Hill, Australia.

[7] Isma Putra, Boy.,Hidayat, Alfan., Purnama, Jaka., (2013): Elemen Mesin, Graha Ilmu, Yogyakarta.

[8] Spotts, M. F., (1981): Design of Machine Elements, Prentice-Hall of India, New Delhi.

[9] Shigley, Joseph E., Mitchell, Larry D., Harahap, Gandhi., (1984):

Perencanaan Teknik Mesin, Erlangga, Jakarta.

[10] Khurmi, R. S., Gupta, J. K., (1980): A Text Book of Machine Design, Eurasia Publishing House, New Delhi.

(2)

MODELING AND DESIGN OPTIMIZATION OF FOLDING TABLE FRAME

USING SOLIDWORKS SOFTWARE Page 60 of 63

Eduardo Ardita [11] A. Rafael, A. Goizalde, A. Enrique, G.G. Vicente. 2000. A finite element

approach to the position problems in open-loop variable geometry trusses.

Finite Elements in Analysis and Design 34 (2000) 233-255.

[12] C. Marcello et al. 2017. Reverse engineering and scanning electron microscopy applied to the characterization of tool wear in dry milling processes. Procedia CIRP 62 ( 2017 ) 233 – 238.

[13] M. Hjiaj, K. Krabbenhøft, A.V. Lyamin. 2016. Direct computation of shakedown loads via incremental elastoplastic analysis. Finite Elements in Analysis and Design 122 (2016) 39–48.

[14] P. Lu’lu’, F. Kyotaro, X. Jinghong, N.R. Cucuk, M. Satoshi. 2015. Effect of Furniture Weight on Carrying, Lifting, and Turning of Chairs and Desks among Elementary School Children. PLoS ONE 10(6): e0128843.

doi:10.1371/journal. pone.0128843.

[15] S. Filip, S. Ludek, D. Ivo, R.B. Matthew. 2015. Modelling of the stiffness evolution of truss core structures damaged by plastic buckling. Finite Elements in Analysis and Design 100 (2015) 1–11.

[16] L. Yucheng. 2008. Optimum design of straight thin-walled box section beams for crashworthiness analysis. Finite Elements in Analysis and Design 44 (2008) 139 – 147.

[17] S.Y. Lin, F.C. Lin. 2003. Prediction of fold defect in barreling formations of cylinder upsetting. Finite Elements in Analysis and Design 39 (2003) 325–

341.

[18] B. Masahiko et al. 2007. Prediction of strength and strain of the proximal femur by a CT-based finite element method. Journal of Biomechanics 40 (2007) 1745–1753.

(3)

MODELING AND DESIGN OPTIMIZATION OF FOLDING TABLE FRAME

USING SOLIDWORKS SOFTWARE Page 61 of 63

Eduardo Ardita [19] R. Pescaru, P. Kyratsis, and G. Oancea. 2016. A Case Study of Reverse

Engineering Integrated in an Automated Design Process. 20th Innovative Manufacturing Engineering and Energy Conference (IManEE 2016).

Referensi

Unduh sekarang ( PDF - 3 Halaman - 101.59 KB )

Dokumen terkait

Optimization Of Injector Gun Design Using Design For Manufacturing And Assembly (DFMA) At The Conceptual Design Stage.

4.12 Material and Manufacturing Process for Each Part of New Design 61 4.13 DFMA Analysis for New Design Injector Gun 63 4.14 Combining Rod and Handle Parts to Reduce the number

Optimization Design Of Slicing Machine Using Design Of Manufacturing And Assembly (DFMA) Method.

The introduction of highly efficient Interior Point Method (IPM) based algorithms and software for convex optimization since the 90s has motivated people to apply convex

Hybrid Artificial Neural Network-Genetic Algorithm Technique for Modeling and Optimization of Plasma Reactor - Diponegoro University | Institutional Repository (UNDIP-IR)

Hybrid Artificial Neural Network - Genetic Algorithm Technique for Modeling and Optimization of Plasma Reactor.. Istadi* ,†

Design of Unsharp Masking Filter Kernel and Gain using Particle Swarm Optimization

The 2014 7th International Congress on Image and Signal Processing Design of Unsharp Masking Filter Kernel and Gain using Particle Swarm Optimization Ngaiming Kwok School of

Formulation and optimization of microemulsion-based organogels containing propranolol hydrochloride using experimental design methods

The flux and the viscosity of the prepared formulations were determined and further chosen as two responses for optimization, using experimental design and optimization methods i.e..

Optimization of the 3D Printing Parameters on Dimensional Accuracy and Surface Finishing for New Polyamide 6 and Its Composite Used in Fused Deposition Modeling (FDM) Process

Optimization of the 3D Printing Parameters on Dimensional Accuracy and Surface Finishing for New Polyamide 6 and Its Composite Used in Fused Deposition Modeling FDM Process Tuan

Comparative analysis and design of tower using diagrid, conventional moment frame and braced frame system of steel structures

4 Conclusions Comparative analysis and design of diagrid DIA, moment frame MF, and braced frame BF structural systems applied for a 10-story steel tower revealed that the DIA system

Modeling and Optimization of Surface Roughness in Keyway Milling Using ANN, Genetic Algorithm, and Particle Swarm Optimization

This paper presents a combined approach using artificial neural networks (ANN), genetic algorithm (GA), and particle swarm optimization (PSO) to model and optimize surface roughness in keyway milling of C40 steel under wet