58 DAFTAR PUSTAKA
Bledzki, A. K. dan Gassan J. (1997). The Influence of Fiber-Surface Treatment on the Mechanical Properties of Jute-Polypropylene Composites, Composite, 28A: 1001-1005.
Callister Jr, W. (2014). Materials Science and Engineering. New York: Mc Graw- Hill Book.
Callister, W. (2010). Materials Science and Engineering (8th Edition). New York:
Mc Graw Hill
Callister, W. (2010). Materials Science and Engineering (8th Edition). New York:
McGrawHill.
Casey, J. (1980). Pulp and Paper Chemistry dan Chemical Technology (Vol. IA).
New York: Wiley Interscience Publisher.
Dr. Dale Retallack, P. (2005). ENGINEERED WOOD. Department of Mechanical Engineering.
Eko Putra, F. (2017). Penyeraapn Air pada Epoxy dan Poliester. Balikpapan:
Institut Teknologi Kalimantan.
Ko FK and Chou TW (1989) Textile structural composites. New York: Elsevier, Published
Fahmi, H. (2011). Pengaruh Orientasi Serat Pada Komposit Resin Poliester/Serat Daun Nanas Terhadap Kekuatan Tarik. Jurnal Teknik Mesin Vol. 1 No. 1, 46-52.
Fernando, (2016). Isolasi Serat Mikro Selulosa Kristalin Berbasis Batang Sorgum (Sorghum Bicolor Sp.) Melalui Metode Kimiawi Alkalisasi, Pemutihan Dan Hidrolisis Asam. Skripsi. Universitas Indonesia: Jakarta.
Frone, A., Berlioz, S., Chailan, J.‐F., Panaitescu, D. and Donescu, D. (2011), Cellulose fiber‐reinforced polylactic acid. Polym Compos, 32: 976-985.
https://doi.org/10.1002/pc.21116
59 Habibi, Y., dkk. (2010). Processing and characterization of reinforced polyethylene composite made with lignocellulosic fibers from Egyptian Agro-industrial residues, Composites Science and Technology, In Press, 1-9.
John, D. A. (2007). Fundamentals of Aerodinamics. USA: The McGraw-Hill Companies, Inc.
Joshua W. Heil, 2015.” Methods of Processing Kenaf Chopped Strand Mats for Manufacturing Test Specimens and Composite Structures”. Utah State University
Kalagi, G. R. D., 2016. Experimental Study on Mechanical Properties of Natural Fiber Reinforced Polymer Composite Materials for Wind Turbine Blades.
India, Materials Today Proceeding, p. 2589.
Kaw, A.K., 1997, Mechanics of Composite Material, CRC Press, Boca Raton.
Klemm, O., dkk. (1998). Mechanical properties of impact modifier polypropylene-
wood flour composites, journal Appl. Polym. Sci, 67: 1503-1513.
Kristian, A. G., 2017 “Sifat Komposit Berpenguat Serat Buah Nanas dengan Fraksi Volume Serat 4%, 6%, 8%, dan 10%”, Skripsi S1, Universitas Sanata Dharma Yogyakarta. Yogyakarta.
K. Van RijsBwijk, et.al, 2001, Natural Fibre Composites Structures and Materials.
Laboratory Faculty of Aerospace Engineering Delft University of Technology
Made Astika, 2009 ‘Karakteristik Lelah Chopped Strand Mat/Polyester Composite’. Jurnal Ilmiah Teknik Mesin CakraM Vol. 3 No.2.
Masturi. (2010). Efektivitas Polyvinyl Acetate (PVAc) Sebagai Matriks Pada Komposit Sampah. (pp. Vol. 13, No. 2, 61-66). Jurnal Berkala Fisika . Mohanty, Amar K, (2005) ‘Natural Fiber, Biopolymer an Biocomposite’
Handbook. Taylor and francis CRC press.
60 Putera, Rizky. (2012). Ekstraksi Serat Selulosa dari Tanaman Eceng Gondok (Eichornia crassipes) dengan Variasi P elarut, Depok: Universitas Indonesia
Potthast A., Rosenau T., Kosma P. (2006) Analysis of Oxidized Functionalities in Cellulose. In: Klemm D. (eds) Polysaccharides II. Advances in Polymer Science, vol 205. Springer, Berlin, Heidelberg.
Ramadevi Punyamurthy, Dhanalakshmi Sampathkumar. (2012) “Efefect Of Alkali Treatment on Water Absorption of Singel Cellulosic Abaca Fiber”.
BioResources. 7(3) 3515-3524
Rowe, R.C., Sheskey, P.J., and Quinn, M. E., 2009, Handbook of Pharmaceutical Excipients, Edisi VI, Pharmaceutical Press and the American Pharmacists Assosiation, United States of America, 17; 118-120; 262-263; 283; 517- 518.
Sulistijono. (2012). Mekanika Material Komposit. Surabaya: ITS PRESS.
Sumarauw, H. F. (2017). Sifat Mekanis Material Komposit Berpenguat Partikel Cangkang Kepiting Menggunakan Variasi Fraksi Volume Partikel 10%, 20%, dan 30%. Yogyakarta: Universitas Sanata Dharma.
Vasiliev, Morozov. (2001). Mechanics and Analysis of Composite Materials.
Moscow: Elsevier.
Walock, M. J. (2012). Nanocomposite Coatings Based on Quaternary Metal nitrogen and Nanocarbon Systems” [Disertasi]. Birmingham: University of Alabama.
