Dr. Abu Khalid Rivai, M.Eng.
PROFILE:
Full Name : Dr. Abu Khalid Rivai, M.Eng.
Field of Expertise : Materials, Corrosion, and Nuclear Reactor Technology Position : Associate Researcher
Mailing Address : Center for Science and Technology of Advanced Materials, National Nuclear Energy Agency,
Puspiptek Area, Serpong, Tangerang Selatan 15314, Indonesia
Phone: +62 21 7560922 Fax: +62 21 7560926
E-mail: rivai.abukhalid[at]batan.go.id
Dr. Eng. Abu Khalid Rivai, M. Eng. is an associate researcher at the Center for Science and Technology of Advanced Materials – National Nuclear Energy Agency of Indonesia (BATAN). He was born in the rain city
“Bogor” on May 8, 1978. He received his Bachelor of Science degree from Bandung Institute of Technology in 2001. Then, he directly joined with Center for Development of Advanced Reactors System – National Nuclear Energy Agency of Indonesia (BATAN). In 2006 he received Master of Engineering (M.
Eng.) from Department of Nuclear Engineering - Tokyo Institute of Technology, Japan and in 2009 he received Doctor of Engineering (Dr. Eng.) from the same institution. All the programs were supported by Ministry of Education, Culture, Sports, Science and Technology (Monbukagakusho Scholarship). He received a competitive grant from Japan Society of Mechanical Engineering (JSME) when he studied master program, and department’s best award for his master final defense. He received a competitive grant from Japanese Ministry when he studied doctoral program. He finished doctoral program for 2.5 years from 3 years regular program with the title of dissertation was “Studies on Materials Corrosion and Oxygen Sensors at High Temperature and Core Neutronics for Lead Alloy-Cooled Fast Reactor”.
After finished the doctoral program, he directly join as a postdoctoral fellowship to Japan Atomic Energy Agency (JAEA) for one of J-PARC (Japan Proton Accelerator Research Center)`s projects for almost 2 years, 2009-2010. His research was about investigation of high-corrosion resistant materials for proton beam window for Accelerator Driven Transmutation System (ADS). In 2011 he started his research at Center for Technology of Nuclear Industry Materials – BATAN. Up to know he actively involved with national and international research project. In 2012-2014 he was one of principal investigators for national consortiums which his project was about research and development of high temperature
materials by uitilization of Indonesian natural resources. In 2011, he did short-term research at Karlsruhe Institute of Technology - Germany about utilization of Pulsed Electron Beams for surface treatment of materials for nuclear reactor applications. In 2013, he did short-term research at Korean Advanced Nano Fabrication Center (KANC) – Republic of South Korea about utilization of Atomic Force Microscope (AFM) technique to investigate nano-channel formation in corroded steels by high temperature molten Lead-Bismuth Eutectic (LBE). In 2014, he did short-term at Institute of Advanced Energy (IAE) – Kyoto University Japan about development of advanced steels ODS (Oxide Dispersion Strengthened) steels for advanced nuclear reactor system applications. All the short-term research projects were granted by Ministry of Research and Technology of Indonesia. His current research interests are development of high temperature materials for advanced nuclear reactors system. At the Center for Science and Technology of Advanced Materials – BATAN, he is the coordinator of research group of development of structural and functional materials for nuclear reactor systems.
I. Educations
- Bachelor of Science, Physics/Bandung Institute of Technology/Indonesia, 2001
- Master of Engineering, Nuclear Engineering/Tokyo Institute of Technology/Japan, 2006 - Doctor of Engineering, Nuclear Engineering/Tokyo, Institute of Technology/Japan, 2009
II. Awards and Honours
1. 2004-2006: Monbukagakusho Scholarship of Japan for study of master program at Nuclear Engineering Department of Tokyo Institute of Technology – Japan.
2. 2006: Best Award for The Outstanding Presentation of The Thesis and For The Achievement In Pursuit of Master of Engineering Degree from Nuclear Engineering Department of Tokyo Institute of Technology - Japan.
3. 2006: The selected student as a representative for International Conference on Nuclear Engineering 14 (ICONE 14), July 17 - 20, 2006, Miami, Florida, USA.
4. 2006-2009: Monbukagakusho Scholarship of Japan for study of doctoral program at Nuclear Engineering Department of Tokyo Institute of Technology – Japan.
5. 2007: The best graduate student from competitive selection at Nuclear Engineering Department of Tokyo Institute of Technology - Japan for student representative to Summer School Frederic Joliot/Otto Hahn Summer School On Nuclear Reactors: Physics, Fuels, and Systems, Karlsruhe-Germany, 29 August-7 September 2007.
6. 2009-2010: Postdoctoral Fellowship (competitive selection) at JPARC-Japan Proton Accelerator Research Complex JAEA-Japan Atomic Energy Agency.
7. 2012: Indonesian Presidential Award “Satyalancana Karya Satya X Tahun”.
8. 2012: Best Poster Presentation Award at Indonesia Scientific Seminar on Science and Technology of Materials (PIIB2012) - BATAN
9. 2013: The best paper at National Seminar on Technology Innovation and Industrial Engineering – Department of Mechanical Engineering University of Andalas Indonesia SINTERIN 2013.
10. 2014: The best participant at The Advanced Level of Education and Training Course for Indonesia Researcher – Indonesian Science Institute (LIPI).
III. Professional Experience
1. Invited Speaker at Seminar Nasional Fisika (SNF) 2015 Dept. Fisika FMIPA UNILA, Bandar Lampung, 18 April 2015.
2. Invited Speaker at Seminar Teknologi Kimia Aplikatif (SENSITIF) 2014 Dept. Kimia FMIPA IPB, Bogor, 21 Juni 2014
3. Group research coordinator in structural and functional materials for nuclear reactors, 2015.
4. Indonesian representative for ITC (Instructor of Training Course) of Reactor Engineering at Japan Atomic Energy Agency, 2015.
IV. Employment Records
- Staff Researcher, Center For Development of Advanced Reactors System - National Nuclear Energy Agency – BATAN, 2001-2004
- Research Assistant, Department of Nuclear Engineering Tokyo Institute of Technology, 2007- 2009
- Postdoctoral fellowship, Japan Proton Accelerator Research Complex-JPARC Japan Atomic Energy Agency – JAEA, 2009-2010
- Staff Researcher, Center For Technology of Nuclear Industry Materials- BATAN, 2011-2014 - Associate Researcher, Center For Science and Technology of Advanced Materials-BATAN,
2014 - present
V. Participation as Editor and Reviewer
- Atom Indonesia, Editor, BATAN Indonesia, (2011-present)
- Jurnal Sains Materi Indonesia, Editor-In-Chief, PSTBM BATAN Indonesia, (2014-present) - Annals of Nuclear Energy, Reviewer, Elsevier, (2011-2012)
- Energy Conversion and Management, Reviewer, Elsevier, (2011)
- Turkish Journal of Physics, Reviewer, Scientific and Technology Research of Turkey, (2011) - Makara Journal of Technology, Reviewer, University of Indonesia, (2013-2014)
VI. Professional Societies
- Materials Research Society of Indonesia (MRS-INA)
VII. Publications
1. Abu Khalid Rivai, Effect of cold working on the corrosion resistance of JPCA stainless steel in flowing Pb-Bi at 450°C, Volume 431, Pages 97-104, (2012), Journal of Nuclear Materials- Elsevier International Journals
2. Abu Khalid Rivai, HCM12A Oxide Layer Investigation using Scanning Probe Microscope, Volume 431, Pages 120-124, (2012), Journal of Nuclear Materials- Elsevier
3. Abu Khalid Rivai, Corrosion investigations of Al–Fe-coated steels, high Cr steels, refractory metals and ceramics in lead alloys at700°C, Volume 398, Pages 146-152, (2010), Journal of Nuclear Materials- Elsevier
4. Abu Khalid Rivai, Corrosion characteristics of materials in Pb–Bi under transient temperature conditions, Volume 398, Pages 139-145, (2010), Journal of Nuclear Materials- Elsevier
5. Abu Khalid Rivai, Investigations of a zirconia solid electrolyte oxygen sensor in liquid lead, Volume 398, Pages 160-164, (2010), Journal of Nuclear Materials- Elsevier
6. Abu Khalid Rivai, Compatibility of surface-coated steels, refractory metals and ceramics to high temperature lead–bismuth eutectic, Volume 50, Pages 560-566, (2008), Progress in Nuclear Energy- Elsevier
7. Abu Khalid Rivai, Performance of oxygen sensor in lead–bismuth at high temperature, Volume 50, Pages 575-581, (2008), Progress in Nuclear Energy- Elsevier
8. Abu Khalid Rivai, A rail transportable lead-bismuth cooled reactor, Volume 50, Pages 192-196, (2008), Progress in Nuclear Energy- Elsevier
9. Abu Khalid Rivai, Minoru Takahashi, “Design study of small lead-cooled fast reactor cores using SiC cladding and structure”, Journal of Power and Energy Systems, Vol.1 No.2, (Elsevier-ScienceDirect- 2007).
1. Abu Khalid Rivai, Shigeru Saito, and Kenji Kikuchi, “Corrosion Characteristics of TIG Welds in Flowing Lead-Bismuth Eutectic at 450°C”, The 12th International Workshop on Spallation Materials Technology – IWSMT 12, Bregenz, Austria , 19-23 October 2014.
International Conferences and Workshops
2. Abu Khalid Rivai, Nurdin Effendi and Annette Heinzel, “Corrosion Behavior of A Very High Chromium Content Ferritic Steel In Liquid Pb-Bi Eutectic”, International Conference on Materials Science and Technology – ICMST 2014, Serpong 13 – 17 October 2014.
3. Abu Khalid Rivai, Bernardus Bandriyana, and Djoko Hadi Prajitno, ”Corrosion Characteristics of Germanium-Enriched Zirconium Alloys In Cesium at 700°C”, International Conference on Materials Science and Technology – ICMST 2014, Serpong 13 – 17 October 2014.
4. Abu Khalid Rivai, Galih Putra Drantou Munggaran, Deswita, Heri Jodi, Bambang Sugeng, Imam Wahyono, Sumaryo, and Dian Fitriyani, “High Energy Ball Milling-Assisted Synthesis And Characterization of 8 Mol% Yttria Stabilized Zirconia”, International Conference on Materials Science and Technology – ICMST 2014, Serpong 13 – 17 October 2014.
5. B. Bandriyana, A. K. Rivai, J. H. Prajitno, A. Dimyati, “High temperature oxidation of the hot rolled ZrNbMoGe alloy for fuel cladding material of Pressurized Water Reactor”, International Conference on Advanced Materials Science and Technology (ICAMST 2014), Solo, Indonesia, September 16-17, 2014.
6. Abu Khalid Rivai, Mardiyanto, and Annette Heinzel, “Nano-channels Formation Investigation of A High Cr-Steel After Immersion in Lead-Bismuth Eutectic”, Symposium on “Nanotechnology and Nano-biotechnology Innovative Application for Sustainable Green Economy and Climate Change Mitigation (ISN-2013)”.
7. Mardiyanto dan Abu Khalid Rivai, Atomic Force Microscopy Characterization of Thin Film Ba0.5Sr0.5TiO3 Coated on LaAlO3 Synthesized Using Pulsed Laser Deposition, Symposium on
“Nanotechnology and Nano-biotechnology Innovative Application for Sustainable Green Economy and Climate Change Mitigation (ISN-2013)”.
8. Abu Khalid Rivai, Devi Anggraini, Arbi Dimyati, Marzuki Silalahi, “Preliminary Study of Synthesis of TiO2-Dispersed Steel by Mechanical Alloying”, Proceedings International Physics Conference 2012, pages 235-238, Physics Department University of Gadjah Mada, ISBN: 979-95620-2-3.
9. Abu Khalid Rivai, Shigeru Saito, Chiaki Kato, Masao Tezuka, Kenji Kikuchi, “Effect of Cold Working On The Corrosion Resistance of JPCA Steel In Flowing Pb-Bi at 450°C”, 10th International Workshop on Spallation Materials Technology (IWSMT-10), Beijing-China, October 18-22, 2010.
10. Abu Khalid Rivai, Shigeru Saito, Chiaki Kato, Masao Tezuka, Kenji Kikuchi, Akihiko Kimura,
“Recent Activities of JLBL-1 Pb-Bi Corrosion Test Loop at J-PARC”, IP-EUROTRANS International Training Course (ITC-9) on Accelerator-driven Transmutation System for European and Asian Young Scientists and Engineers, Tokai-Japan, December 1-4, 2009.
11. Abu Khalid Rivai and Minoru Takahashi, “Corrosion Characteristics of Candidate Materials for Pb- Cooled Reactor System”, IWSMT9- Ninth International Workshop on Spallation Materials Technology October 19 - October 24, 2008, Sapporo, Hokkaido, Japan (2008).
12. Abu Khalid Rivai and Minoru Takahashi, “Corrosion Characteristics of Alloy-Sputtering Coated Steel, High Cr Steels, Refractory Metals and Ceramics in LBE under Transient Temperature Conditions Up To 800ºC”, IWSMT9-Ninth International Workshop on Spallation Materials Technology October 19 - October 24, 2008, Sapporo, Hokkaido, Japan (2008).
13. Abu Khalid Rivai and Minoru Takahashi, “Performance of a Zirconia Solid Electrolyte Oxygen Sensor in Molten Pb”, IWSMT9-Ninth International Workshop on Spallation Materials Technology October 19 - October 24, 2008, Sapporo, Hokkaido, Japan (2008).
14. Abu Khalid Rivai and Minoru Takahashi, “Corrosion Resistance of Alloy-Sputtering-Coated Steels and High Chromium Steels In Pb-Bi at Transient Temperature Conditions”, Proc. of the Intern.
Conf. on Advances in Nuclear Science and Engineering-ICANSE 2007, Bandung, Indonesia, November 13 – 14, 2007, (2007).
15. Abu Khalid Rivai and Minoru Takahashi, “Corrosion Behavior of Al-Fe-Sputtering-Coated Steel, High Chromium Steels, Refractory Metals and Ceramics in High Temperature Pb-Bi”, Proceedings of ICAPP- International Congress on Advances in Nuclear Power Plants 2007, Nice, France, May 13-18, 2007, Paper No. 7284 (2007).
16. Minoru Takahashi, Abu Khalid Rivai, Tomoki Kumagai, “Performance of Oxygen Sensor And Corrosion of Surface-Coated Steels, Ceramics And Refractory Metals In High Temperature LBE”,
17. Minoru Takahashi and Abu Khalid Rivai, “Safety Design/Analysis and Scenario for Prevention of CDA with ECCS in Lead-Bismuth-Cooled Fast Reactor”, Proceedings of ICAPP International Congress on Advances in Nuclear Power Plants 2007, Nice, France, May 13-18, 2007, Paper No.
7280 (2007).
Workshop on Structural Materials for Innovative Nuclear Systems (SMINS), 4-6 June 2007 Karlsruhe, Germany (2007).
18. Minoru Takahashi and Abu Khalid Rivai, “Corrosion Resistance of Al-Fe-alloy-coated Steel, Refractory Metals and Ceramics in Lead-bismuth at 700C”, 5th International Workshop on the Utilization and Reliability of High Power Proton Accelerators (HPPA5) 6-9.May.2007, Mol, Belgium (2007).
19. Minoru Takahashi and Abu Khalid Rivai, “Corrosion behaviour of Al-Fe-coated steels and high chromium steels in high temperature Pb-Bi”, IV Workshop on Materials for HLM-cooled Reactors and Related Technologies, May 21-23rd, 2007 Sala Marconi – CNR Headquarters, Roma, Italy (2007).
20. Abu Khalid Rivai and Minoru Takahashi, “Compatibility of Surface-Coated Steels, Refractory Metals and Ceramics to High Temperature Lead-Bismuth Eutectic”, The 2nd COE-INES International Symposium on Innovative Nuclear Energy Systems, INES-2 November 26-30, 2006, Paper No. 123 (2006).
21. Abu Khalid Rivai and Minoru Takahashi, “Performance of Oxygen Sensor in Lead-bismuth at High Temperature”, The 2nd COE-INES International Symposium on Innovative Nuclear Energy Systems, INES-2 November 26-30, 2006, Paper No. 030 (2006).
22. Vaclav Dostal, Abu Khalid Rivai and Minoru Takahashi, “A Rail Transportable Lead-bismuth Cooled Reactor”, The 2nd COE-INES International Symposium on Innovative Nuclear Energy Systems, INES-2 November 26-30, 2006, Paper No. 052 (2006).
23. Abu Khalid Rivai and Minoru Takahashi, “Corrosion Behaviors of Al-Steel-Sputtering-Treated Steel And SiC/SiC Composites in High Temperature LBE At Low Oxygen Concentration”, Proceedings of ICONE 14 - International Conference on Nuclear Engineering, July 17-20, 2006, Miami, Florida, Paper No. 89303 (2006).
24. Abu Khalid Rivai and Minoru Takahashi, “Design Study of Small Lead-Cooled Fast Reactors Using SIC Cladding and Structure”, Proceedings of ICONE 14 - International Conference on Nuclear Engineering, July 17-20, 2006, Miami, Florida, Paper No. 89299 (2006).
25. Abu Khalid Rivai, Ferhat Aziz and Minoru Takahashi, “Design Study of 300 MWT PWR Fueled With UO2 Coated Fuel Particle”, Proceedings of ICONE 14 - International Conference on Nuclear Engineering, July 17-20, 2006, Miami, Florida, Paper No. 89287 (2006).
26. Toru Nakajima, Abu Khalid Rivai, Koji Hata and Minoru Takahashi, “Study Plan for Material Corrosion Test in Lead and Bismuth Eutectic at High Temperature”, Proceedings of ICONE 14 - International Conference on Nuclear Engineering, July 17-20, 2006, Miami, Florida, Paper No.
89420 (2006).
1. Abu Khalid Rivai, Alan Bolind, Shigeru Saito, Dai Yamazaki, Kenji Kikuchi, “Investigation of early oxide-layer formation using neutron reflectometer”, AESJ Fall Meeting, Sapporo, 15-17 September, (2010).
Japan National Conferences
2. Abu Khalid Rivai, Shigeru Saito, Chiaki Kato, Masao Tezuka, Kenji Kikuchi,“Study on Material Damage in the High Energy Quantum Beam Fields and Development of High Performance Materials: Compatibility of Cold Work-Treated JPCA Steel and Its TIG Welding with Flowing Pb- Bi”, Atomic Energy Society of Japan-AESJ Annual Meeting 2010, Mito 26-28 March, (2010).
3. Abu Khalid Rivai, Shigeru Saito, Chiaki Kato, Masao Tezuka, Kenji Kikuchi,“Corrosion Behavior of Cold Work-Treated JPCA Steel and Its TIG welding in Flowing Pb-Bi at 450ºC”, 10th National Meeting on Spallation Target Materials Technology, Tokai, 14-15 December, (2009).
4. Abu Khalid Rivai, Shigeru Saito, Chiaki Kato, Masao Tezuka, Kenji Kikuchi, Akihiko Kimura,“Corrosion Behavior of High Cr-ODS Steels in Flowing Lead-Bismuth at JLBL-1”, Atomic Energy Society of Japan-AESJ Fall Meeting 2009, Sendai 16-18 September, (2009).
5. Abu Khalid Rivai and Minoru Takahashi, “Compatibility of Surface-coated Steel and Refractory Metals in High Temperature Pb-Bi under Transient Temperature Conditions”, AESJ Fall Meeting, Kochi, 4-6 September, (2008).
6. Abu Khalid Rivai and Minoru Takahashi, “Corrosion Behavior of Ceramics in High Temperature LBE at Steady and Transient Temperature Conditions”, AESJ Annual Meeting, Osaka, 26-28 March, (2008).
7. Abu Khalid Rivai and Minoru Takahashi, “Corrosion Resistance of FeAl Alloy-Coated Steels and Refractory Metals in High Temperature Pb-Bi”, AESJ Fall Meeting, Kitakyushu, 27-29 September, (2007).
8. Abu Khalid Rivai and Minoru Takahashi, “Core Characteristics of Small Lead Alloy Cooled Fast Reactor For Various Fuel Types and Cladding-Structure Materials”, AESJ Fall Meeting, Kitakyushu, 27-29 September, (2007).
9. Abu Khalid Rivai and Minoru Takahashi, “Conceptual Design of Lead-cooled Fast Reactor using SiC Cladding and Structure”, AESJ Fall Meeting, Hachinohe, Aomori, 13-15 September, (2005).
1. Abu Khalid Rivai, Zaki Suud, Ferhat Aziz, “Design Study of Modular Lead-Bismuth Cooled Fast Reactors with Nitride Fuel”, Journal of Indonesian Physics Contribution - KFI, Vol. 13 No.4, Oktober (2002).
Indonesian National Journal Paper
2. Abu Khalid Rivai, Bernandus Bandriyana, Annette Heinzel dan Fabian Lang, “Kompatibilitas Paduan Zirkonium Pada Cairan Logam Berat Lead-Bismuth Eutectic“, Jurnal Sains Materi Indonesia, Vol. 14, No. 1, hal. 67-73, (2012).
1. Abu Khalid Rivai, Galih Putra Drantou Munggara, Dian Fitriyani, “Sintesis Yttria Stabilized Zirconia Dengan Metode Pemaduan Mekanik Untuk Bahan Sensor Oksigen Reaktor Nuklir”, Prosiding Seminar Nasional Teknologi Energi Nuklir 2014, Pusat Teknologi dan Keselamatan Reaktor Nuklir Pusat Kajian Sistem Energi Nuklir, Pontianak 19 Juni 2014.
Indonesian National Conferences
2. Nanda Shabrina, Abu Khalid Rivai, Ari Handayani, dan Deswita, “Studi Komparasi Serbuk 8YSZ (Yttria-Stabilized Zirconia) Hasil Sintesis dengan Metode Sol-Gel dan Ultrasonik”, Prosiding Seminar Nasional “Sains Dan Teknologi Dalam Penanganan Energi X”, UNJANI-Universitas Jenderal Achmad Jani, Cimahi 11 November 2014.
3. Galih Putra Drantou Munggaran dan Abu Khalid Rivai, “Studi Awal Sintesis Serbuk Paduan YSZ (Yttria Stabilized Zirconia) Menggunakan Berbagai Metode Solid State Reaction”, Seminar Nasional Inovasi Teknologi dan Rekayasa Industri SINTERIN (2013).
4. Fitriani Tresnaputri dan Abu Khalid Rivai, “Sintesis Dan Karakterisasi Serbuk Baja Feritik Ods (Oxide Disppersion Strengthened) MA957”, Seminar Fisika dan Aplikasinya-SFA, (2013).
5. Abu Khalid Rivai, Annette Heinzel, Fabian Lang, "Investigasi Ketahanan Korosi Baja Aisi 316 Pada Cairan Logam Berat Pb-Bi Eutektik 550°C Selama 312 Jam", Prosiding Pertemuan dan Presentasi Ilmiah - Penelitian Dasar Ilmu Pengetahuan dan Teknologi Nuklir 2012, PTAPB - BATAN, hal 57-62, ISSN 0216 – 3128.
6. Abu Khalid Rivai, "Analisis Penggunaan Keramik Untuk Material Reaktor Cepat Berpendingin Timbal-Bismut Eutektik", Prosiding Seminar Nasional Pengembangan Energi Nuklir V (2012), hal 175-186, ISSN 1979-1208.
7. B. Bandriyana, Abu Khalid Rivai, Agus Hadi Ismoyo, Parikin, ”Penelitian Dan Pengembangan Paduan Zirkonium Untuk Material Kelongsong PLTN”, Prosiding Seminar Nasional Pengembangan Energi Nuklir V (2012), hal 217-225, ISSN 1979-1208.
8. Abu Khalid Rivai, “Corrosion Resistance of Aluminum-Iron Thin Film Using Unbalanced Magnetron Sputtering Technique In Liquid Pb-Bi At High Temperature”, Pertemuan dan Presentasi Ilmiah Penelitian Dasar Ilmu Pengetahuan dan Teknologi Nuklir, Yogyakarta 19 Juli, (2011).
9. Abu Khalid Rivai, Annette Heinzel, Frank Zimmermann, Mattia DelGiacco, “Surface Treatment of Steels for Nuclear Systems Materials Using Pulsed Electron Beam Technique”, Seminar Nasional Teknologi dan Aplikasi Akselerator XIV, Yogyakarta, 13 Desember, (2011).
10.Abu Khalid Rivai, Ferhat Aziz, “Core Physics Analysis of A Small Pressurized Water Reactor Design”, Proceedings of the Annual Physics Seminar, (2003).
11.Ferhat Aziz, Abu Khalid Rivai, “A Design Study on Experimental Power Reactor Core Fueled With UO2 CFP”, Proceedings of Technology & Safety of Nuclear Power Plant and Nuclear Facilities- BATAN, August (2003).
12.Ferhat Aziz, Sidikrubadi Pramudito, Hermawan, Abu Khalid Rivai, As Natio Lasman, “Design Study of Modular BWR With Long Fuel Cycle Operation”, Proceedings of Technology & Safety of Nuclear Power Plant and Nuclear Facilities-BATAN, October (2002).
13.As Natio Lasman, Ferhat Aziz, Abu Khalid Rivai, Hermawan, “Neutronics Core Design of Experimental Power Reactor”, Proceedings of Technology & Safety of Nuclear Power Plant and Nuclear Facilities-BATAN, October (2002).
14.Ferhat Aziz, Abu Khalid Rivai, “Design Analysis of Subcritical Assembly With Liquid Fuel”, Proceedings of Technology & Safety of Nuclear Power Plant and Nuclear Facilities-BATAN, February (2002).
15.Abu Khalid Rivai, Ferhat Aziz, Zaki Su’ud, “Void Analysis of Small Fast Reactors With Lead-Bismuth Coolant”, Proceedings of Technology & Safety of Nuclear Power Plant and Nuclear Facilities-BATAN, February (2002).
16.Ferhat Aziz, Abu Khalid Rivai, “Analysis of Core Physics Performance of A Modular Lead-Bismuth Cooled Fast Reactor”, Proceedings of Computation on Science and Nuclear Technology, July (2002).
