DAFTAR PUSTAKA
Abulila, H. (2022). Production Engineering, Chapter 2: Measurement. Production Eng. & Design Dept. Faculty of Engineering, Minia University.
Antonius, D. B. (2019). Analisa Perkembangan Struktur Aluminium (AC2B) Dengan Pengaruh Penambahan Stronsium Pada Part Transmisi Sub Assy Menggunakan Metode Pengecoran Gravity Dies Casting. Universitas Kristen Indonesia.
Artkin, F. (2022). CMM Machines and Industrial Applications. Kocaeli University, Department of Machinery and Metal Technologies, Kocaeli, Turkey.
Beeley, P. (2001). Foundry Technology, Second edition. Oxford: Butterworth- Heinemann.
Fachrie, Y. (2015). Rancang Bangun dan Analisa Simulasi Sistem Saluran dan Penambah (Riser) Terhadap Cacat Penyusutan (Shrinkage) pada Pembuatan Rumah Transmisi Mobil Listrik Brajawahana dengan Pengecoran Pasir (Sand Casting). Surabaya: Jurusan Teknik Mesin, Fakultas Teknologi Industri, Institut Teknologi Sepuluh Nopember.
Favia, C. M. (2021). A CAD-based design for manufacturing method for casted components. Parma, Italy: Università degli Studi di Parma.
Gomba, J. D. (2001). Spectroscopic characterization of laser induced breakdown in aluminium lithium alloy samples for quantitative determination of traces.
Argentina: Instituto de Fısica ‘Arroyo Seco’, Facultad de Ciencias Exactas, U.N.C.P.B.A.
Kaufman, J. G. (2004). Aluminum Alloy Castings: Properties, Processes, and Applications. ASM International.
Krisnowo, A. H. (2018). Casting Design Optimization for Steam Turbine Emergency Stop Valve (ESV) Housing with Computational Casting Simulation Method. International Journal of Advanced Engineering Research and Science, 72-77.
Lei, C. Y. (2019). Magma Software Simulation Assisted Optimization of The Casting System of Turbocharger Castings. Procedia Manufacturing.
Lin, Y.-C. C.-M.-C. (2013). Analysis of Microstructure and Wear Performance of SiC Clad Layer on SKD61 Die Steel After Gas Tungsten Arc Welding.
Taipei: Department of Mechanical Engineering, National Taiwan University.
Mittemeijer, E. (2015). Nitriding of Binary and Ternary Iron-Based Alloys.
Stuttgart, Germany: Max Planck Institute for Intelligent Systems and Institute for Materials Science, University of Stuttgart.
Paramasivam, P. V. (2020). Mechanical Characterization of Aluminium Alloy 6063 Using Destructive and Non-destructive Testing. Andhra Pradesh, India:
Department of Mechanical Engineering, Mettu University and Department of Mechanical Engineering, BVC Engineering College.
Radisa, R. G. (2009). Optimization of Casting Process Design." . Faculty of technical sciences, Universitas studiorum.
Saravanakumar, A. S. (2016). Optimization of Machining Parameters using Taguchi Method for Surface Roughness. Coimbatore, India.: Department of Mechanical Engineering, KPR Institute of Engineering and Technology.
Sasaki, K. &. (2006). Low Cycle Thermal Fatigue and Microstructural Change of AC2B-T6 Aluminum Alloy." . International Journal of Fatigue.
Sutopo, A. A. (2010). Pembuatan Stand for Contracer Sebagai Alat Bantu Optimalisasi Proses Pengukuran Inner Tube di PT. Perkakas Rekadaya Nusantara. Bandung: Jurusan Teknik Manufaktur, Politeknik Manufaktur Negeri Bandung.
Tiryakioğlu, M. &. (2015). On The Representative Strain in Vickers Hardness Testing of 7010 Aluminum Alloy. North Florida and Limerick: School of Engineering, University of North Florida, USA, & Department of Mechanical, Aeronautical and Biomedical Engineering, University of Limerick, Ireland.
Zhenhai Xu, G. A. (2015). Painting of aluminium panels – state of the art and development issues. Centre for Precision Manufacturing, Dept. of Design, Manufacture & Engineering Management, The University of Strathclyde.
