There are… main phases (steps) in the process/in the process of producing…, starting with… and ending with…. The first step in the process is. The first stage in the process is the subsequent steps. During smoking in the barrel, the fish are hung on wires to 'smoke'.
This is not clear in the diagram, but this is the process that takes place. The flow chart illustrates the various stages in the small-scale fish smoking process. All in all, there are 13 stages, from finding compacted snow to cutting ventilation holes in the wall and roof of the finished igloo.
Finally, ventilation holes that allow air to enter are cut in the walls and roof, and the igloo is finished.
The flow chart below shows the procedure to get a driving license in the US
The diagram below shows the process of generating electricity from coal
First, coal is extracted from the coal mine, and then it is mechanically crushed into small pieces. At this stage, gas is produced due to heating, and the coal is disposed of as a solid waste. The heated gas is then cooled in a separate device and is ready to be sent to the next stage of the process, which takes place in the gas plant.
In this plant, electricity is produced from the coal gas and some of the heat is generated that is discharged as waste. In the final stage, electricity is ready to be supplied to domestic consumers or to industries.
The diagrams illustrate the formation of sand dunes from sand particles
Paraphrase paragraph: show>illustrate; how sand dunes are formed>the formation of sand dunes. Outline/summary paragraph: (1) report the number of stages (2) state what happens in the first and last stages. In general, it is clear that the process consists of 3 phases, starting with the action of wind blowing the sand particles, and ending with the formation of the sand dunes on the wet areas of the soil.
In the first diagram, sand is blown by wind on dry and wet soil. In the second diagram, the sand particles continue to be carried by the wind, but now more sand particles collect on the moist soil, forming separate small piles. Finally, the third diagram shows how sand particles continue to collect over areas of wet soil, with the sand piles increasing in size.
These sand dunes change the direction of the wind by forcing it down one side of the dune and down the other. The process is then repeated on the next piece of wet ground, to form a series of sand dunes.
The diagram below shows the development of cutting tools in the Stone Age
Summary/Review Paragraph: (1) Tool B is sharper and more regular in shape (2) cutting tools became bigger and better during this period. The diagram illustrates how the cutting tools used in the Stone Age evolved between 1.4 million and 0.8 million years ago. Overall, it is clear that the B tool is sharper and more correctly shaped than the previous A tool.
The front view shows that the edges of Tool A are rough, revealing its earlier stage of development. Thus, while tool A is relatively primitive, the smooth edges of tool B are clearly more effective as a cutting tool. One of the main differences between the tools is shown in the side view diagram.
Finally, the rear view shows most clearly that tool A is not only rougher, but also smaller than tool B.
The picture below shows a hot balloon works
Overall, it is clear that the envelope makes up the majority of the total area. Additionally, the diagram indicates that propane is the fuel used to produce the warm air. At the base of the hot air balloon there is a propane cylinder in the basket.
The propane is then mixed with air in the burner, creating a flame to heat the air. Then the hot air rises inside the envelope, causing the balloon to rise off the ground because the hot air is lighter than the cold air in the surrounding atmosphere. In addition to the edge at the bottom of the envelope, the notches and panels are also part of the envelope.
This allows the balloon pilot to control the speed at which the hot air can escape.
The diagrams below show the development of the horse
Four stages are generally shown, starting with Eohippus and ending with the development of the modern horse. 10 million years later, it evolved into the larger Mesohippus with a longer tail and a three-toed foot structure. It was similar in size to Mesohippus and also had 3 toes, but now the toes were larger, segmented, and the middle toe was very prominent.
It is larger than its predecessors, with a large mane and the structure of the feet consisting of a single, very large toe.
The diagram shows the life cycle of the silkworm
Paraphrase paragraph: diagram>image; shows>illustrates; life cycle>stages in life. Overall, there are 4 main stages in the silkworm's life cycle, starting with egg laying and ending with the final stage as an adult moth. In the first stage of the life cycle, eggs are laid by an adult moth on a mulberry leaf.
After a period of about 10 days, the silkworm larvae hatch and start feeding on the mulberry leaves. Then, after the larvae are completely covered with silk thread, which lasts from 3 to 8 days, a cocoon is formed. The adult moth, in turn, will lay eggs on the mulberry leaves and the life cycle will begin again.
The diagram illustrates the process of making carbonated drinks
It is mixed with carbon dioxide and then this carbonated water is passed into another tube, ready for the third stage. It then passes through another filter and is bottled or canned in the fourth stage.
The diagram shows the life cycle of a salmon
Paragraph paraphrase: diagram>picture; shows> illustrates; life cycle> different periods in life. Review/Summary Paragraph: (1) state the number of stages (2) refer to the first and last stage. In general, there are 5 main stages in the life cycle of a salmon, starting with spawning when the eggs are laid and ending with the adult salmon.
In the third stage, the young fish undergo a period of rearing, part of the time in the fresh water where the eggs are laid, and part of the time in an estuary, where fresh water and sea water meet. Next, the salmon migrate to the sea, where they continue to grow and mature for a period of time, in areas where this continuation of the rearing process takes place. In the final stage, when the fish have grown and matured, they are ready to migrate to spawning grounds.
The diagram shows how drinking water is produced using a solar-powered water pumb and water filter
Paraphrase paragraph: shows>illustrates; how drinking water is produced>the process of producing drinking water; use > through. Overview/summary paragraph: (1) the number of stages in the process (2) refers to the first and last stages (starting with..and ending with..). The diagram illustrates the process of producing drinking water using a water pump powered by solar energy and a water filter.
Generally, there are seven stages in the process, starting with capturing sunlight and ending with collecting potable water in containers. The solar panel is connected by wires to the inverter, which then converts the solar energy into electricity. In the next stage, water is pumped from the well to the water tank, which is placed on a wooden platform.
A filter in the water tank is then used to filter the water before it enters the pipe. After filtering, the tube drains the water from the water tank and is now ready to drink. Finally, a faucet attached to a pipe is used to fill portable containers with drinking water as people collect it.
The diagrams illustrate 3 different types of bridges
Overall, there are 10 main stages in this process, starting with sheep breeding and ending with the finished products. Paraphrase paragraph: diagram>diagram; shows>illustrates; stages>different steps; recycling > the recycling process. The diagram illustrates the different steps involved in the process of recycling aluminum cans.
In total, there are a total of 11 stages shown in this recycling process, from the delivery of used cans to the recycling plant to the production of new recycled cans, which takes a total of 6 weeks from start to finish. After crushing, the process continues in the factory, including the use of chemicals to erase designs. Paraphrase paragraph: shows>illustrates; how tea leaves are processed>the making process; five different types>different types.
In total, tea production can involve as many as nine different stages, starting with growing the tea and ending with drying the leaves in the oven. However, in green tea production, the withered leaves are steamed and rolled before being dried in the oven. The production of small leaf black tea is similar, except that it is not rolled, but rather crushed before complete fermentation to produce smaller leaves.
Broadly speaking, the diagrams show the basic parts of a solar panel, down to the bottom diagrams that illustrate how this panel functions to produce warm air or water. These parts are a sheet of transparent glass that fits over the panel, an inlet pipe and an outlet pipe on the opposite side. The second diagram, on the left, shows how the sun's rays pass through the transparent glass and heat the air entering the panel through the inlet pipe.
Water enters the solar panel through an inlet tube, which then forms an 'S' shaped tube within the panel itself. Paraphrase paragraph: shows>illustrates; system>water filter assembly; turns dirty water into clean water > cleans dirty water to produce drinking water.
