• Tidak ada hasil yang ditemukan

PROTOTYPE OF FIRE DETECTION EQUIPMENT WITH TELEGRAM NOTIFICATION AND IOT-BASED ALARM

N/A
N/A
Info
Unduh - Bebas
Protected

Academic year: 2023

Membagikan "PROTOTYPE OF FIRE DETECTION EQUIPMENT WITH TELEGRAM NOTIFICATION AND IOT-BASED ALARM "

Copied!
1
0
0

Memuat.... (Lihat teks lengkap sekarang)

Unduh sekarang ( 1 Halaman )

Teks penuh

(1)

vii

PROTOTYPE OF FIRE DETECTION EQUIPMENT WITH TELEGRAM NOTIFICATION AND IOT-BASED ALARM

Student name : Oxyta Sri Giyanto Student identity number : 6103191329

supervisor : Wahyat, M.Kom

ABSTRACT

Fire is one of the tragedies that cannot be predicted, in addition to being unwanted by society, large fires are often uncontrollable. Fire events caused by natural, non-natural or human factors themselves can pose a great threat and risk to the loss of life and community livelihoods, causing fatalities, environmental damage, property losses, and psychological impacts. Geographically, densely populated urban areas are fire-prone areas that endanger and disrupt people's lives and livelihoods. Fire is classified as a form of disaster. Given the impact, it is necessary to have a fire detector that can be used to detect fires in the house and reduce the impact. This study aims to design and build a fire detection device, the system to be built uses a flame sensor that functions to detect the presence of fire, an MQ-2 sensor to detect smoke, a buzzer that functions as an alarm using the NodeMCU ESP8266 microcontroller as a controller and also output data from sensors that can send notifications to the firedetection bot on telegram to mobile users.

Keywords: Fire detector, Flame sensor, MQ-2, NodeMCU ESP8266, Telegram.

Referensi

Unduh sekarang ( PDF - 1 Halaman - 443.62 KB )

Dokumen terkait

View of Design of a Fire Location Monitoring System Using Temperature and Smoke Detectors on Sea Ships

The fire location monitoring system that will be used to detect fires consists of a temperature detector, smoke detector, MY2N relay, raspberry pi 2 model B, fire alarm, led light

Journal of Applied Engineering and Technological Science Vol 2(2) 2021 : 85-93

So some conclusions can be drawn including the following: The cigarette smoke detection and neutralizing system at STMIK Hang Tuah Pekanbaru uses the Mq-2 sensor as

View of Protection and Monitoring System for LPG Leaks and Fires in Arduino-Based Rooms

Based on these problems, a system is designed that can detect LPG gas leaks and can overcome fires by adjusting the device used, using an Arduino Uno microcontroller and an MQ-6

Design of cigarette disposal blower and automatic freshner using mq-5 sensor based on atmega 8535 microcontroller

In the designing of the Cigarette Smoke disposal blower Device and Auto Fragrance Using MQ-5 Sensor Based Microcontroller ATMega 8535 consists of the stage of

DESIGN AND CONTROL SYSTEM OF HOME FENCE BASED ON INTERNET OF THING (IoT)

In this study, the author wants to design and build a gate control device using an Android smartphone application so that it can be a support for users to open and close the gate from

View of SMOKE DETECTION DESIGN USING MQ-2 SENSOR AND EXHAUST FAN BASED ON MICROCONTROLLER

The smoke detector workflow works when it detects smoke, when smoke is detected in an air-conditioned room, the MQ2 sensor will send smoke data to Arduino UNO, Arduino will set work and

View of TWO-AXIS SOLAR PANEL TRACKING DEVICE PROTOTYPE WITH IOT-BASED MONITORING

LDR Sensor Connection Pins LDR Sensor Arduino Uno LDR 1 Input A0 LDR 2 Input A1 LDR 3 Input A2 LDR 4 Input A3 The servo motor design involves using two servo motors to

Prototype design of automatic plant watering equipment with soil moisture detection system based on arduino uno microcontroller: case study of chili plant

The soil moistures were a sensor that worked to determine soil moisture, so when the soil was under certain humidity conditions it can water the chilli plants automatically..