Cooling Load Calculations for Building Design Optimization

(1)

68

DAFTAR PUSTAKA

[1] “Statistik Sektoral Kota Surabaya Tahun 2020,” 7 Desember 2020. [Online].

Available: https://surabaya.go.id/id/berita/58124/statistik-sektoral-kota- surabay. [Diakses 10 September 2021].

[2] W. Gang, S. Wang, K. Shan dan D. Gao, “Impacts of Cooling Load Calculation Uncertainties on the Design Optimization of Building Cooling Systems,” Energy and Buildings, vol. 94, pp. 1-9, 2015.

[3] A. Bathia, HVAC Cooling Load - Calculations & Principles, New Jersey:

Continuing Education and Development, Inc., 2014.

[4] ASHRAE, ASHRAE Handbook of Fundamentals, Atlanta: American Society of Heating, Refrigerating and Air Conditioning Engineers Inc, 2001.

[5] R. Parsons, ASHRAE Handbook Fundamentals SI Edition, Atlanta:

American Society of Heating, Regfrigerating, and, 1997.

[6] ASHRAE, ASHRAE Handbook of Fundamentals SI Edition, Atlanta:

American Society of Heating Refrigerating and Air Conditioning Engineers Inc, 2009.

[7] Ariffin, Metode Klasifikasi Iklim di Indonesia, Indonesia: UB Press, 2019.

[8] U. K. Sen, R. Rana dan A. Punia, “Comparison of Cooling Load Estimation by CLTD Method and Computer Software,” International Reseach Journal of Engineering and Technology, vol. 03, no. 07, pp. 1378-1380, 2016.

[9] C. Mao, J.-C. Baltazar dan J. S. Haberl, “Comparison of ASHRAE peak cooling load calculation methods,” Science and Technology for the Built Environment, vol. 25, no. 2, pp. 189-208, 2019.

[10] K. Bansal, S. Chowdhury dan M. R. Gopal, “Development of CLTD values for buildings located in Kolkata, India,” Applied Thermal Engineering, vol.

28, no. 10, pp. 1127-1137, 2008.

[11] O. A. Zainal dan R. Yurumtas, “Validation of periodic solution for computing CLTD (cooling load temperature difference) values for building walls and flat roofs,” Energy, vol. 82, pp. 758-768, 2015.

Estimasi Nilai Faktor Cooling Load Temperature Difference (CLTD) Kota Surabaya FADHILA FANDY, Dr. Eng. M Kholid Ridwan., S.T., M.Sc.; Dr. Ing. Andang Widiharto, M.T.

Universitas Gadjah Mada, 2021 | Diunduh dari http://etd.repository.ugm.ac.id/

(2)

69

[12] E. CatalinaVallejo-Coral, C.I.Rivera-Solorio, M.Gijón-Rivera dan H.

F.Zúñiga-Puebla, “Theoretical and experimental development of cooling load temperature difference factors to calculate cooling loads for buildings in warm climates,” Applied Thermal Engineering, vol. 150, pp. 576-590, 2019.

[13] R. Octoro, “Analisa perhitungan beban pendinginan dengan menggunakan metode CLTD dan visualisasi pencahayaan dengan piranti lunak dialux = Analyze of cooling load calculation using CLTD method and lighting visualization with dialux software,” Departemen Teknik Mesin, Fakultas Teknik Universitas Indonesia, Jakarta, 2013.

[14] M. I. Alhamid, R. M, Budihardjo dan Nasrudin, “Prediksi dan Validasi Kondisi (Properties) Udara Luar pada Perancangan Sistem Energi,”

Departemen Teknik Mesin, Fakultas Teknik Universitas Indonesia, Jakarta, 2008.

[15] SNI, Tata Cara Perancangan Sistem Ventilasi dan Pengkondisian Udara pada Bangunan Gedung SNI 03:6572:2001, Jakarta: Badan Standardidasi Nasional, 2001.

[16] ASHRAE, ASHRAE Handbook: Fundamental SI Edition, Atlanta: American Society of Heating, Refrigerating and Air Conditioning Engineers Inc, 2017.

[17] CIBSE, Environmental Design: CIBSE Guide A 8th Edition, London: CIBSE, 2016.

[18] J. D. Spitler, F. C. McQuiston dan L. K. Lindsey, “The CLTD/SCL/CLF Cooling Load Calculation Method,” Building and Environmental Thermal Systems, vol. 99, pp. 183-192, 1993.

[19] S. Chaiyapinunt, K. Mangkornsaksit dan B. Phueakphongsuriya,

“Development of Cooling Load Temperature Differential Values for Building Envelopes in Thailand,” Journal of the Chinese Institute of Engineers, vol.

27, pp. 677-688, 2004.

[20] M. U. M. K. Recep Yurumtas, “Periodic Solution of Transient Heat Flow Through Multilayer Walls and Flat Roofs by Complex Finite Fourier Transform Technique,” Building and Environment, vol. 40, pp. 1117-1125, 2004.

[21] J. P. Holman, Heat Transfer 10th Edition, New York: McGraw-Hill, 2010.

[22] D. Hess dan D. G. Tasa, “McKnight's Physical Geography: A Landscape Appreciation 11th Edition,” dalam Climate and Climate Change, New York, Pearson, 2013, pp. 208-214.

(3)

70

[23] H. E. Beck, N. E. Zimmermann, T. R. McVicar, N. Vergopolan, A. Berg dan E. F. Wood, “Present and future Köppen-Geiger climate classification maps at 1-km resolution,” 30 Oktober 2018. [Online]. Available:

https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6207062/. [Diakses 15 September 2021].

[24] “Meteotest,” Meteotest AG, [Online]. Available:

https://meteonorm.com/en/product/meteonorm-software. [Diakses 28 05 2021].

[25] SNI, Konservasi Energi Selubung Bangunan pada Bangunan Gedung SNI 6389:2011, Jakarta: Badan Standardisasi Nasional, 2011.

[26] SNI, Spesifikasi Beton Struktural SNI 6880:2016, Jakarta: Badan Standardisasi Nasional, 2016 .