IMPROVING MATERIAL EFFICIENCY ON CALENDERING PROCESS BY USING SIX SIGMA AND DEFINE MEASURE ANALYZE IMPROVE CONTROL (DMAIC) METHODS IN INDONESIAN LEADING TRUCK BUS BIAS TIRE
MANUFACTURER Page 75 of 84
Albherd Ramadhan Putra REFERENCES
Allen, T. T. (2018). Introduction to engineering statistics and lean six sigma: Statistical quality control and design of experiments and systems. In Introduction to
Engineering Statistics and Lean Six Sigma: Statistical Quality Control and Design of Experiments and Systems. https://doi.org/10.1007/978-1-4471-7420-2 Beach, D., & Schroeder, J. (2000). Overview of tire technology. Rubber World,
222(6), 44.
Boral, S. (2016). Ace the PMI-ACP® exam. In Ace the PMI-ACP® exam.
https://doi.org/10.1007/978-1-4842-2526-4
Company, C. S. (2019). Internal Company Documentation.
Dhillon, B. S. (2006). Maintenance , and Reliability and Reliability.
Gaspersz, V. (1997). Statistical Process Control: Penerapan Teknik-Teknik Statistikal Dalam Manajemen Bisnis Total. Gramedia Pustaka Utama.
Gaspersz, V. (2002). Pedoman Implementasi Program Six Sigma Terintegrasi dengan ISO 9001:2000, MBNQA, dan HACCP. Gramedia Pustaka Utama.
http://library1.nida.ac.th/termpaper6/sd/2554/19755.pdf
Gupta, V., Jain, R., Meena, M. L., & Dangayach, G. S. (2018). Six-sigma application in tire-manufacturing company: a case study. Journal of Industrial Engineering International, 14(3), 511–520. https://doi.org/10.1007/s40092-017-0234-6 Ishikawa, Y. (2011). Systematic Review of Tyre Technology. 16, 137.
http://sts.kahaku.go.jp/diversity/document/system/pdf/066_e.pdf
Kristanto, A. Y., & Rumita, R. (2016). Analisis Penyebab Cacat Kain Dengan
Menggunakan Metode Failure Mode and Effect Analysis (Fmea) Dan Fault Tree Analysis (Fta). 5(1), 1–8.
Kusmariyati, N., Sinuraya, C., & Verani, C. (2011). Analisis Cost of Poor Quality Sebagai Alat Penilaian Kegiatan Perbaikan Kualitas. 2.
Nijman, G. (2001). A fundamental approach of the cord calendering process. Rubber Chemistry and Technology, 74(4), 715–728. https://doi.org/10.5254/1.3544969 Pande, P. S., Neuman, R. P., & Cavanagh, R. R. (2000). The Six Sigma Way - How GE,
Motorola, and Other Top Companies are Honing Their Performance (1st ed.).
McGraw-Hill. http://library1.nida.ac.th/termpaper6/sd/2554/19755.pdf
IMPROVING MATERIAL EFFICIENCY ON CALENDERING PROCESS BY USING SIX SIGMA AND DEFINE MEASURE ANALYZE IMPROVE CONTROL (DMAIC) METHODS IN INDONESIAN LEADING TRUCK BUS BIAS TIRE
MANUFACTURER Page 76 of 84
Albherd Ramadhan Putra Pang, X. T. (2018). Quality Improvement with PFMEA in A Manufacturing System.
48.
Rezaee, M. J., Salimi, A., & Yousefi, S. (2017). Identifying and managing failures in stone processing industry using cost-based FMEA. International Journal of Advanced Manufacturing Technology, 88(9–12), 3329–3342.
https://doi.org/10.1007/s00170-016-9019-0
Samson, D., & Singh, P. J. (2008). Operations management: An integrated approach.
In Operations Management: An Integrated Approach.
https://doi.org/10.1017/CBO9781139150002
Setyono, A., & Novianto, S. (2013). Penerapan Interpolasi Linier Untuk Deteksi Garis Lurus pada Citra Gambar. Techno.COM, 12(3), 143–149.
Shankar, R. (2009). Process Improvement Using Six Sigma.
https://books.google.ie/books?hl=en&lr=&id=pJFeNy9Z74IC&oi=fnd&pg=PR3
&dq=DMAIC&ots=frlfPRwq0b&sig=pChD5SiFBpwZIgSOSMdOrdds6Mg&red ir_esc=y#v=onepage&q=DMAIC&f=false
Sommer, J. G., & Sommer, J. G. (2009). Tires. Engineered Rubber Products, 143–168.
https://doi.org/10.3139/9783446433441.008
Sosialisman, Y. (2014). Peningkatan Kualitas Produk pada Proses Mesin Injection Moulding dengan Pendekatan DMAIC Six Sigma Universitas Indonesia.
Stankevičiūté, L. (2000). Energy Use and Energy Management in Tyre Manufacturing : the Trelleborg 1 Case. 1–45.
Sullivan, W. G., Wicks, E. M., & Koelling, C. P. (2015). Engineering Economic Sixteenth Edition (16th ed.). Pearson Higher Education, Inc.
Tampang, B. (2008). Peningkatan Kualitas Proses Pembuatan Filter Menggunakan Metode Six Sigma. Universitas Indonesia.
Trimarjoko, A., Saroso, D. S., Purba, H. H., Hasibuan, S., Jaqin, C., & Aisyah, S.
(2019). Integration of nominal group technique, Shainin system and DMAIC methods to reduce defective products: A case study of tire manufacturing industry in Indonesia. Management Science Letters, 9(Spceial Issue 13), 2421–
2432. https://doi.org/10.5267/j.msl.2019.7.013
Truck Bus Bias Tire Manufacturer. (2020). Truck Bus Bias Tire Manufacturer.
Yard, S. (2000). Developments of The Payback Method. International Journal of Production Economics, 67(2), 155–167. https://doi.org/10.1016/S0925- 5273(00)00003-7
