Classification of linear/quasi-linear PDE - Examples - Physical processes: Wave equations and heat transfer and fluid flow equations - Mathematical behavior - General properties - Its importance in understanding the physical and numerical aspects of PDE - One-dimensional variables one way and two way - Well posed problems – Initial and boundary conditions. Introduction, equations of motion, Lagrangian points, stability of Lagrangian points, integral, accessible Jacobian regions.
TECH. AERONAUTICAL ENGINEERING INTRODUCTION TO SPACE TECHNOLOGY
TECH. AERONAUTICAL ENGINEERING INTRODUCTION TO AEROSPACE ENGINEERING
TECH. AERONAUTICAL ENGINEERING AIR TRANSPORTATION SYSTEMS
TECH. AERONAUTICAL ENGINEERING ROCKETS AND MISSILES
TECH. AUTOMOBILE ENGINEERING DISASTER MANAGEMENT
Organizational Structure for Disaster Management in India – Preparation of State and District Disaster Management Plans. National Disaster Management Plan, Ministry of Home Affairs, Government of India (http://www.ndma.gov.in/images/policyplan/dmplan/draftndmp.pdf).
TECH. AUTOMOBILE ENGINEERING INTELLECTUAL PROPERTY RIGHTS
TECH. AUTOMOBILE ENGINEERING DATA STRUCTURES
Fundamentals of Data structures in C, 2nd Edition, E. Horowitz, S. Sahni and Susan Anderson-Freed, Universities Press. Data Structures and Algorithms Made Easy in JAVA, 2nd Edition, Narsimha Karumanchi and Career Monk Publications.
TECH. AUTOMOBILE ENGINEERING ARTIFICIAL NEURAL NETWORKS
TECH. AUTOMOBILE ENGINEERING INTRODUCTION TO MECHATRONICS
Programmable Motion Controllers: Introduction - System Transfer Function - Laplace Transform and its Application in Differential Equation Analysis of a Control System - Feedback Devices: Position, Velocity Sensors - Optical Incremental Encoders - Proximity Sensors: Inductive, Capacitive, Infrared - Continuous and Discrete Processes - Control System Performance and tuning - Digital controllers - P , PI , PID control - Control modes - Position , Speed and Torque - Speed profiles - Trapezoidal - S.
TECH. AUTOMOBILE ENGINEERING MICROPROCESSORS AND MICROCONTROLLERS
Advanced ARM Processors: Introduction to CORTEX processor and its architecture, OMAP processor and its architecture.
TECH. BIOMEDICAL ENGINEERING RELIABILITY ENGINEERING
Estimation of network reliability using probability distributions: Estimation of reliability of series systems, Parallel systems - Partially redundant systems - determination of reliability measure - MTTF for series and parallel systems - Examples. Approximate estimation of system reliability: Series systems - Parallel systems - Network reduction techniques - Cut set approach - Common mode failure modeling and evaluation techniques - Examples.
TECH. BIOMEDICAL ENGINEERING MEDICAL ELECTRONICS
TECH. BIOMEDICAL ENGINEERING TELEMETRY AND TELECONTROL
Telecontrol Methods and Applications of Telemetry and Remote Control - by Swoboda G., Reinhold Publishing Corp., London, 1991.
TECH. BIOMEDICAL ENGINEERING
EMI Measurements: Introduction to Open Area Test Site Measurements – Measurement Precautions – Open Area Test Site – Site Roughness – NSA – Measurement of Test Site Imperfections – Antenna Factor Measurement – Measurement Errors. Radiated Interference Measurements – Anechoic Chamber – TEM Cell – Reverberating Chamber – Ghz TEM Cell – Comparison of Test Facilities – Meeting Uncertainty Conducted Interference Measurements – Characterization – Conducted EM Noise on Power Supply Lines – Conducted EMI from Equipment – Immunity – Detectors and Measurement – Pulsed EMI Immunity – Electrostatic Discharge .
TECH. CIVIL ENGINEERING DISASTER MANAGEMENT
TECH. CIVIL ENGINEERING REMOTE SENSING AND GIS
Raster data model: elements of the raster data model, raster data types, raster data structure, data conversion, integration of raster and vector data. Data entry: Metadata, conversion of existing data, creation of new data; Remote sensing data, field data, text data, digitizing, scanning, on-screen digitizing, importance of source map, data editing.
TECH CIVIL ENGINEERING GEOINFORMATICS
TECH. CIVIL ENGINEERING INTELLECTUAL PROPERTY RIGHTS
TECH CIVIL ENGINEERING
Environmental Protection Act, Water Act, Air Act (Pollution Prevention and Control Act), Motor Vehicle Act, Game Act.
TECH. CIVIL ENGINEERING
Course Outcome: It enables students to learn the basic principles of Entrepreneurship and entrepreneurial development which will help them to provide vision for their own Start-up. Strategic Growth in Entrepreneurship, The Valuation Challenge in Entrepreneurship, The Final Harvest of New Ventures, Technology, Business Incubation, India way – Entrepreneurship; Women entrepreneurs – strategies to develop women entrepreneurs, institutions supporting women entrepreneurship in India.
TECH. CIVIL AND ENVIRONMENTAL ENGINEERING DISASTER MANAGEMENT
TECH. CIVIL AND ENVIRONMENTAL ENGINEERING ENVIRONMENTAL IMPACT ASSESSMENT
TECH. CIVIL AND ENVIRONMENTAL ENGINEERING INTELLECTUAL PROPERTY RIGHTS
Remote Sensing: Basic Concept of Remote Sensing, Data and Information, Collection of Remote Sensing Data, Advantages and Limitations of Remote Sensing, Process of Remote Sensing. Electromagnetic Spectrum, Interactions of energy with the atmosphere and with features of the earth's surface (soil, water, vegetation), characteristics of Indian satellites and sensors, Resolution, mapping and image and false color composite, access to digital data, elements of visual interpretation techniques.
TECH. CIVIL AND ENVIRONMENTAL ENGINEERING ENTREPRENEURSHIP AND SMALL BUSINESS ENTERPRISES
TECH COMPUTER SCIENCE AND ENGINEERING/TECH INFORMATION TECHNOLOGY
Relational Model: Introduction to the Relational Model, Relationship Integrity Constraints, Enforcing Integrity Constraints, Relational Data Query, Logical Database Design: ER to Relational, Introduction to Views, Destroying/Modifying Tables and Views. Collection Framework in Java - Introduction to Java Collections, Overview of Java Collection Framework, Generics, Commonly Used Collection Classes - Array List, Vector, Hash Table, Stack, Enumeration, Iterator, String Tokenizer, Random, Scanner, Calendar and Properties.
TECH COMPUTER SCIENCE AND ENGINEERING / TECH INFORMATION TECHNOLOGY
UNIT IV
TECH. ELECTRONICS AND COMMUNICATION ENGINEERING / TECH ELECTRONICS AND TELEMATICS ENGINEERING
ELECTRONICS AND COMMUNICATION ENGINEERING / B.TECH ELECTRONICS AND TELEMATICS ENGINEERING / B.TECH ELECTRONICS AND TELEMATICS ENGINEERING PRINCIPLES OF COMPUTER COMMUNICATION AND NETWORKS. Overview of Computer Communications and Networks: Introduction to Computer Communications and Networks, Introduction to Computer Networks, Types of Computer Networks, Network Addressing, Routing, Reliability, Interoperability and Security, Network Standards, The Telephone System and Data Communications.
TECH. ELECTRONICS AND COMPUTER ENGINEERING SCRIPTING LANGUAGES
Tcl Basics, String and Pattern Matching, Tcl Data Structures, Control Flow Commands, Procedures and Scope, Evel, Working with Unix, Reflection and Debugging, Script Libraries, Tk Basics, Tk by Examples, Geometry Manager package, X event binding commands, Buttons and menus, Simple Tk widgets, Input and list box Widgets Focus, capture and dialogs. Introduction to Python, using the Python interpreter, More control flow tools, data structures, modules, input and output, errors and exceptions, classes, a brief tour of the standard library.
TECH. ELECTRONICS AND COMPUTER ENGINEERING SOFT COMPUTING TECHNIQUES
Basic concepts of Genetic Algorithms (GA), biological background, creation of offspring, working principle, coding, fitness function, reproduction, inheritance operators, crossover, inversion and deletion, mutation operator, bitwise operators used in GA, generation cycle, Convergence of Genetic Algorithm. Types of Hybrid Systems, Neural Networks, Fuzzy Logic and Genetic Algorithms Hybrid Genetic Algorithm Based BPN: GA Based Weight Determination, Fuzzy Back Propagation Dept.
TECH. ELECTRONICS AND COMPUTER ENGINEERING DATA ANALYTICS
Frequent Itemsets and Clustering: Mining Frequent Itemsets – Market-Based Modeling – Apriori Algorithm – Handling Large Datasets in Main Memory – Limited Pass Algorithm – Counting Frequent Itemsets in a Stream – Clustering Techniques – Hierarchical – K-means – Clustering of High Dimensional Data – CLICK and ProCLUS – Regular pattern based clustering methods – Clustering in non-euclidean space – Clustering for streams and Parallelism.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING NON-CONVENTIONAL POWER GENERATION
Geothermal Energy - Sources- Hydrothermal Convective - Geopressure Resources - Petrothermal Systems (HDR) - Magma Resources-Prime Movers. OTEC Systems- Principle of Operation - Open and Closed Circuits, Energy from Tidal - Principle of Tidal Power - Components of Tidal Power Plants - Methods of Operation - Estimation of Energy in Single and Double Basin Systems - Energy and Power from Waves - Wave Energy Conversion Devices - Fuel Cells - Design and Principle of Operation - Types of Fuel Cells - Advantages and Disadvantages - Types of Electrodes - Applications - Basics of Batteries - Construction Details of Lead Acid Batteries - Ni-Cd Batteries.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING ELECTRICAL ENGINEERING MATERIALS
TECH. ELECTRICAL AND ELECTRONICS ENGINEERING NANOTECHNOLOGY
ELECTRICAL AND ELECTRONICS NANOTECHNOLOGY. STM), Field Ion Microscope (FEM), Three-dimensional Atom Probe (3DAP), Nanoindentation. Applications of nanomaterials: nanoelectronics, micro- and nanoelectromechanical systems (MEMS/NEMS), nanosensors, nanocatalysts, food and agricultural industry, cosmetics and consumer goods, structure and engineering, automotive industry, water treatment and environment, nano-medical applications, textiles, paint, energy , defense and space applications, concerns and challenges of nanotechnology.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING DESIGN ESTIMATION AND COSTING OF ELECTRICAL SYSTEMS
Code of practice for electrical installations, (system voltage not exceeding 650 volts), Indian Standard Institution, IS: 732-1983. Code of practice for electrical wiring, Installations (system voltage not exceeding 650 volts), Indian Standard Institution, IS: 2274-1963.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING ENERGY STORAGE SYSTEMS
Jim Eyer, Garth Corey”, Energy Storage for the Electricity Grid: Benefits and Market Potential Assessment Guide, rapport, Sandia National Laboratories, februari 2010.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING INTRODUCTION TO MECHATRONICS
Electromechanical drives: Relays and solenoids - Stepper motors - DC brush motors - DC brushless motors - DC servo motors - 4-quadrant servo drives, PWMs - Pulse width modulation - Variable frequency drives, vector drives - Drive system load calculation. Programmable Logic Controllers: Basic Structure - Programming: Ladder Diagram -Timers, Internal Relays and Counters - Shift Registers - Master and Jump Controls - Data Handling - Analog Input/Output - PLC Selection - Application.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING ENTREPRENEUR RESOURCE PLANNING
ERP In Action & Business Modules: Operation and Maintenance – Performance – Maximizing the ERP System – Business Modules – Finance – Manufacturing – Human Resources – Plant Maintenance – Materials Management – Quality Management – Marketing – Sales, Distribution and Service. Enterprise Application Integration – ERP and E-Business – ERP II – Total Quality Management – Future Directions – Trends in ERP.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING MANAGEMENT INFORMATION SYSTEM (MIS)
Model, Foundations of IS in Business, Obstacles in Adopting IT, ERP Market- ERP Modules: Finance, Accounting Systems, Manufacturing and Production Systems, Sales and Distribution Systems, Personnel Systems, Factory Maintenance System, Material Management System, Quality Management System, ERP System Options and selection, ERP proposal evaluation.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING ORGANIZATIONAL BEHAVIOUR
Teams – The nature of groups – dynamics in informal groups – dysfunctions in groups and teams – teams in a modern workplace. High Performance Management: Job design and goal setting for high performance - Quality of work life - Sociotechnical design and high performance work practices - Behavioral performance management: reinforcement and punishment as principles of learning - The process of behavior change - Management theories - Styles, activities and skills of great managers.
TECH. ELECTRONICS AND INSTRUMENTATION ENGINEERING ELECTRONIC MEASUREMENTS AND INSTRUMENTATION
Oscilloscopes: CRT, block diagram of CRO, time base circuit, Lissajous figures, CRO probes, high frequency CRO considerations, delay lines, applications: measurement of time, period and frequency specifications. Measurement of physical parameters: flow measurement, displacement gauges, liquid level measurement, humidity and moisture measurement, speed, force, pressure – high pressure, vacuum level, temperature measurements, data acquisition systems.
TECH. ELECTRONICS AND INSTRUMENTATION ENGINEERING INDUSTRIAL ELECTRONICS
TECH. ELECTRONICS AND INSTRUMENTATION ENGINEERING SENSORS AND TRANSDUCERS
Miscellaneous Transducers: Piezoelectric Transducers – Hall Effect Transducers – Smart Sensors – Fiber Optic Sensors – Film Sensors – MEMS – Nano Sensors, Digital Transducers.
TECH. ELECTRONICS AND INSTRUMENTATION ENGINEERING PC BASED INSTRUMENTATION
TECH. MECHANICAL ENGINEERING OPTIMIZATION TECHNIQUES
Constrained Nonlinear Programming: Characteristics of a Constrained Problem - Classification - Basic Approach to Penalty Function Method - Basic Approach to Penalty Function Method - Basic Approaches to Internal and External Penalty Function Methods - Introduction to the Convex Programming Problem. Dynamic programming: Dynamic programming of multi-stage decision processes – types – concept of sub-optimization and the principle of optimality – computational procedure in dynamic programming – examples illustrating the calculus solution method - examples illustrating the tabular solution method.
TECH. MECHANICAL ENGINEERING COMPUTER GRAPHICS
Computer Graphics Second edition”, Zhigand xiang, Roy Plastock, Schaum's outlines, Tata Mc Graw hill edition. Computer Graphics Principles & practice”, anden udgave i C, Foley, Van Dam, Feiner og Hughes, Pearson Education.
TECH. MECHANICAL ENGINEERING INTRODUCTION TO MECHATRONICS
TECH. MECHANICAL ENGINEERING
Couplings, clutches and brakes: construction and applications of couplings (box; flange; . pin type flexible; universal and Oldham), clutches (disc and centrifugal), and brakes (block; shoe; belt and disc). Engineering Materials: Types and applications of ferrous and non-ferrous metals, wood, abrasives, silica, ceramics, glass, graphite, diamond, plastic and polymer.
TECH. MECHANICAL ENGINEERING WORLD CLASS MANUFACTURING
Globalization and World Class Manufacturing: Generic Manufacturing Strategies for the Information Age; WCM planning methodology and strategic planning issues;. The Future of WCM: Manufacturing Strategy: A Futile Search for the Elusive Link, Classification of Manufacturing Strategic Intentions, Converting Intentions into Actions.
TECH. MECHANICAL ENGINEERING FUNDAMENTALS OF ROBOTICS
Trajectory planning: Joint space scheme- Cubic polynomial fitting- Obstacle avoidance in operation space- Cubic polynomial matching with via, bleeding scheme.
TECH. MECHANICAL ENGINEERING FABRICATION PROCESSES
Forging processes: Forging and principles - Tools - Forging methods - Blacksmith forging, Drop forging - Roll forging - Forging hammers: Rotary forging - forging defects - cold forging, forging, forces in forging operations.
TECH. MECHANICAL ENGINEERING TOTAL QUALITY MANAGEMENT
Factories Act – 1948 : Statutory authorities – inspection of personnel, health, safety, provisions relating to hazardous processes, welfare, hours of work, employment of young persons – special provisions – penalties and procedures – Telangana Factories Rules 1950 under Safety and health chapters of Factories Act 1948. International Acts and Standards: Occupational Safety and Health Act of USA (The Williames-Steiger Act of 1970) – Heath and safety work act (HASAWA 1974, UK) – OSHAS 18000 – ISO 14000 – American National Standards Institute (ANSI).
TECH. MECHANICAL ENGINEERING BASICS OF THERMODYNAMICS
Atmospheric air - Psychrometric properties - Dry bulb temperature, wet bulb temperature, dew point temperature, , specific humidity, relative humidity, saturated air, vapor pressure, degree of saturation - adiabatic saturation, psychrometric chart.
TECH. MECHANICAL ENGINEERING RELIABILITY ENGINEERING
Discrete Markov chains: Basic concepts - Stochastic transition probability matrix - Time dependent probability estimation - Limit state probability estimation - Absorption states - Examples. Continuous Markov Processes: Modeling Concepts - State Space Diagrams - Estimation of Unreliability of One-Component and Two-Component Reversible Systems.
TECH. MECHANICAL ENGINEERING (MATERIAL SCIENCE AND NANOTECHNOLOGY)
- Ray Diffraction and Spectroscopic methods
Course overview: The purpose is to introduce the students to the overview of the non-destructive testing methods of materials. The purpose is to introduce students to an overview of the properties of materials used in the engineering manufacturing process.
TECH. MECHANICAL ENGINEERING (MECHATRONICS) ANALOG AND DIGITAL IC APPLICATIONS
TECH. MECHANICAL ENGINEERING (MECHATRONICS) INTELLECTUAL PROPERTY RIGHTS
TECH. MECHANICAL ENGINEERING (MECHATRONICS) COMPUTER ORGANIZATION
Programming in assembly language with 8086 programs at machine level, machine coding of the programs, programming with an assembly language, sample programs in assembly language. Stack structure of 8086, Interrupts and Interrupt service routines, Interrupt cycle of 8086, Interrupt programming, Passing parameters to procedures, Macros, Timings and Delays.
TECH. MECHANICAL ENGINEERING (MECHATRONICS) DATA STRUCTURES
Trees – Terminology, Representation of Trees, Binary Tree ADT, Properties of Binary Trees, Binary Representations of Trees-array and related representations, Binary Tree Traversals, Threaded Binary Trees, Max Priority Queue ADT-Implementation-Max Heap-Definition , Insert Heap, delete from a max heap. Data Structures and Algorithms Made Easy in JAVA, 2nd Edition, Narsimha Karumanchi, Career Monk Publications.
TECH. MECHANICAL ENGINEERING (MECHATRONICS) ARTIFICIAL NEURAL NETWORKS
TECH. MECHANICAL ENGINEERING (MECHATRONICS) INDUSTRIAL MANAGEMENT
