S.M.C. College of Dairy Science
Anand Agricultural University, Anand-388 110
E-TENDER NOTIFICATION
(Through Gujarat Government e- procurement portal only) Website: https://www.nprocure.com
The Principal, S.M.C. College of Dairy Science, Anand Agricultural University, Anand invites tender through e-procurement portal for purchase of CNC Lathe machine, Thermal cycler (PCR) with accessories GEL DOC and Ammonia compressor with necessary controls. The details of the tender are available onhttps://www.nprocure.com in the name of College of food Process Technology & Bio-energy, AAU, Anand. The tender details can be also seen on http://www.aau.in.The tender fee, EMD and other certificates/specifications/documents in physical form are to be sent by post/speed post only to the address given above.
Bid document downloading start date: 23 -08-2013.
Bid document downloading end date: 06 -09-2013.
Last Date for physical submission of tender fee, EMD and other documents: 13 -09-2013.
Principal
S.M.C. College of Dairy Science Anand Agricultural University, Anand
For official use only
Tender No: Signature: Date of Issue:
Last date of tender submission to reach the office through post
SHETH M. C. COLLEGE OF DAIRY SCIENCE
ANAND AGRICULTURAL UNIVERSITY, ANAND - 388 110 (GUJARAT)
Tel. /Fax No.: 02692 -261030
TENDER FORM for
CNC Lathe Machine, Thermal cycler (PCR) with accessories GEL DOC and
Ammonia compressor (with necessary controls and accessories)
NOTE
Payment of Rs. 500/- by DD drawn in the favour of “AAU Fund A/C”, as tender fees payable at Anand should accompany this form separately otherwise the tender form shall be treated as incomplete and cancelled.
DOWNLOADED FROM WEBPAGE
13-09-2013
Terms and Conditions:
The quotation must be in Indian rupees and rates quoted should beinclusive of all applicable Taxes and F.O.R. our Laboratories at Anand inclusive of installation, commissioning and demonstration, if any.
Our university will supply custom duty exemption certificate for being educational institute.
Validity of the quotation should be120 clear days from the last date of receipt of the quotation.
Payment shall be made only after satisfactory installation and demonstration. No advance or part payment or payment through bank can be entertained.
Tender forms only from original manufacturers/ their authorized dealers/ stockists who are in the concerned field will be considered, along with the said certificate.
The credentials of the party, list of customers and complete illustrated literature should be enclosed with the tender form. The firm should be ready for pre inspection of the item and its performance, if necessary.
All the electronic hardware should comply with international standards for safety, electromagnetic emissions and immunity, CE/FCC Mark/Certification, etc.
Tenderers will have to attach original colour catalogue of the each quoted product ensuring exact specifications.
In case of defective items, the same shall have to be replaced by the party concerned at its own cost, and risk, and within stipulated time.
The Earnest Money Deposit (EMD) in the form of account payee Demand Draft in the name of “AAU Fund Account” payable at Anand, shall have to be accompanied with the filled Tender Forms. Tender submitted without EMD shall not be considered. The deposit shall be forfeited if the party in any case is not able to supply the odered goods in stipulated period and at the rates approved.
Duly filled tender forms in sealed envelopes through post/speed post should reach the office of the Principal, Sheth M. C. College of Dairy Science, Anand Agricultural University, Anand 388 110 before 17.00 hr on 13-09-2013.
Please super scribe the envelope, “TENDER DOCUMENTS FOR CNC LATHE MACHINE THERMAL CYCLER (PCR UNIT) AND AMMONIA COMPRESSOR (WITH NECESSARY CONTROLS AND ACCESSORIES) and mention clearly senders’ name and address.
The PRINCIPAL shall be empowered to reject any one or all the tenders without giving any reason for doing the same. This shall not be challengeable in the Court.
Parties may be called for scientific discussion and price negotiation, if required
In case of disputes, decision of Vice Chancellor, Anand Agricultural University, Anand will be final and acceptable to all the parties.
Name of supplier / firm:
Complete postal address:
Telephone Number:
FAX Number (if any):
e-mail address (if any):
Details of Tender fee:
D.D.Number: Bank’s Name:
Amount: Date:
Details of EMD:
D.D.Number : Bank’s Name:
Amount: Date:
Sales Tax No. :
Registration No. :
Any other details
We agree to abide by the terms and conditions of supply mentioned in this tender document
Signature of Tenderer
Lowest competitive rates are hereby invited for the purchase of CNC Lathe Machine, Thermal Cycler (PCR) with accessories GEL DOC and Ammonia Compressor (with necessary controls
and accessories) bearing the following specifications
S.
No.
Specifications of items to be purchased Quantity No.
EMD (Rs.)
Quoted Rate (Rs.) 1 CNC Lathe machine
CNC system having latest SIEMENS SINUMERIK 828D Basic T digital control system with simultaneous 4 axes control, 8.4” TFT color screen, rigid tapping pitch error compensation, USB port, AC spindle drive, AC servo digital drive, L. M. Guide ways, 8 Station Bi-directional servo turret.
Technical Specifications:
Capacity Max. swing over bed 375 mm Max turning length 350 mm Std. turning dia. 150 mm Max. turning dia. 250 mm Turret
(Servo)
Number of station 8 Max boring bar capacity 32 mm
Tool size (cross sectional) 20 x 20 Sq. mm Main
Spindle
Spindle motor power (15 minute rating /S1)
10.5/7 kW Speed range for spindle 50-4500 rpm
Spindle bore 50 mm
Bar capacity (Max) 38 mm Slides Cross (X-axis) travel 150 mm
Longitudinal (Z-axis) travel
350 mm Rapid feed (X and Z axis) 24 m/min
Tailstock Quill Diameter 75 mm
Quill stroke 100 mm
Thrust (adjustable) 300 kgf (max) Accuracy
(As per VDI/DGQ 3441)
Positioning uncertainty (P) 0.007 mm Repeatability (Ps medium) 0.005 mm
1
30,000/
-
2 Thermal Cycler (PCR Unit) with accessories including Gel Doc Gradient PCR with Universal Block, aluminum or alloy, Gradient temperature range: minimum 1-200C,
Temperature range for gradient function: minimum 30-990C;
Heating rate, minimum 3°C/s Cooling rate, minimum 2°C/s
Temperature accuracy: minimum 0.50C;
Sample capacity: 96 X 0.2ml
PCR tube; Gradient possible in all three steps (de-naturation,
1 18,000/
-
With gel documentation unit
With high resolution camera ( > 7.5 mega pixel), high scientific resolution (minimum 4 mega pixel)for molecular weight determination and taking high quality photographs, image resolution, minimum 12 bit, gel size: minimum
8 x10 cm suitable for DNA and protein detection, with gel analysis software, monitor and printing facilities.
Most important conditions:
1. Only reputed companies with trace record of sale of such unit to universities and research institutions should quote. A list of users in Gujarat is to be attached with the quotation.
2. A certificate of origin of the equipment and the production place must be attached.
3. Only those parties, which give minimum two years service warranty at our laboratory, will be accepted. No extra cost will be paid for this.
3. Ammonia Compressor (with necessary controls and accessories):
The unit having capacity of 5 TR @ (-)10°C E.T. and 38°C C. T., directly driven by 7.5 HP 1450 RPM electric motor, coupling between compressor & motor shaft, suction & discharge stop valves and base frame, oil separator with float HP / LP / OP switches & gauges with following items.
a) Ammonia evaporative condensers having 7.5 TR heat rejection capacity at 28°C WB and 38°C condensing temperature. The coils shall be made from 18 G SS 304 tubes and the casing as well as tray shall be made from SS 304 sheets complete with 1 HP fan motor and 0.5 HP water circulation pump with SS 304 water circulation pipeline.
Minimum heattransfer area of coil shall be 10 m2.
b) MS liquid ammonia receiver with liquid inlet and outlet valves, oil drain, air purging valves, pressure gauge &
safety valve with isolating valves, reflex type liquid level indicator with check valves & isolating valves, saddle type MS support. Size of receiver: 18” x 6’ long made from 8 mm boiler quality plates for shell & dished ends. (2 receivers are required with necessary fittings and accessories to be connected in parallel).
c) Ice building coil (Evaporator) made from 32 mm NB SS 304 coil, 2.77 mm (sch. 10) thickness seamless pipes complete with 50 mm NB SS 304 (sch. 10) vertical liquid inlet headers and suction headers, 25 mm NB SS 304 (sch.
10) oil drain pipes with oil drain valves, 40 mm x 5 mm thick SS 304 flats with SS 304 nut & bolts for supporting the coils on 60 mm x 60 mm x 8 mm thick SS base plate.
Total Length of Coil should be 180 RMT.
1 30,000/
-
liquid level controllers.
e) Chilled Water Tank: Size 4 m x 1.2 m x 2.4 m height suitable for housing 180 RMT ice building coil and 16" dia agitator driven by 2 HP electric motor. The tank shall be made from 1 mm thick SS 304 plates andit shall be covered from four sides and bottom with the help of 75 mm thick PUF panels with 0.5 mm thick pre-coated GI sheets.
Necessary stiffeners from MS angles/channels shall be provided on all sides and bottom to prevent from bulging and for the purpose of lifting the tank.
Necessary connections for chilled water outlet, gauge glass drain and overflow shall be provided to the tank. Chilled water tank covers made from 60 mm thick PUF panels covered by 0.5 mm thick pre- coated GI sheets.
f) 16" dia agitator driven by 2 HP TEFC sq. cage induction motor 1450 RPM complete with drive set and belt guard.
g) FRP Induced Draft Cooling Tower Suitable for heat rejection of 72,000 kcal / h @ 36°C / 32°C / 28°C inlet / outlet / WB temperature. Casing / Basin manufactured from FRP, Honey comb type PVC fills, hot dip galvanized structure, 2450 mm dia x 1500 mm height, fan 750 mm dia made from cast aluminium material, fan motor 1.5 HP, 970 rpm IP-55 hot dip galvanized ladder, GI piping and PVC nozzles.
h) MS Refrigerant Pipeline Consisting of seamless tubes 106 grade B (schedule 80 up to 1" dia and schedule 40 above 1"
dia) for interconnecting compressor, condenser, receiver and evaporator coils. Insulation for accumulator and suction line.
i) Valves and controls: Ammonia valves and Liquid level controller of Danfoss /Superfreeze make, Ice Thickness Controllers (2 in number), Digital Temperature Indicators with sensor and SS box for housing the indicators (1 lot), Motor Control Centre consisting of starters for compressor motor, agitator motor, condenser fan and pump motor complete with ampere & volt meters, phase indicating lamps,busbars,power & control cabling,
With installation and connecting the chilled water lines in the existing set-up, necessary amount of ammonia, compressor oil charge and commissioning of the plant with one year on-site warranty.
