Q-SWITCHED HAFNIUM BISMUTH ERBIUM-DOPED FIBER LASER WITH BISMUTH (III) TELLURIDE BASED SATURABLE ABSORBER
Teks penuh
Dokumen terkait
Keywords: Finite element method (FEM), erbium-doped photonic crystal fiber, comsol multiphysics, perfectly matched layer, confinement loss.. Copyright © 2016 Universitas
This project will focus primarily on the simulation of the wideband optical amplifier using high concentration Erbium Doped Fibre in single pass configuration.. The
Since the performance of the amplifier is influenced by the parameter of Optical Signal-to-Noise Ratio (OSNR), Bit Error Rate (BER), and Noise Figure (NF), the problem encounter
Pada jurnal ini diteliti kinerja single Ring Resonator dua kopler yang diintegrasikan dengan Erbium Doped Fiber (EDF) terutama dalam konfigurasi Drop Port
Untuk tahap ke-dua, daya pemompa yang diinjeksikan adalah 68 mW, dimana cukup kuat untuk menciptakan penguatan ke seluruh L-band pada tahap ke-dua. Gain tilt sesudah
dDepartment of Electrical Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia eFaculty of Electrical Engineering, Universiti Teknologi MARATerengganu, 23000 Dungun,
In addition to optimization of the length, Er3+ concentration, and pump power and wavelength of the EDFA and also pump powers of the FRA all of which have been carried on in our
Pulse generation of mode-locking fiber laser at 1.053 µM using graphene oxide film as saturable absorber ABSTRACT This article depicts a reliable mode-locking Ytterbium-doped fibre
