Interaction of Oxygen With Fe Nanowire-Filled Single-Walled Carbon Nanotubes
Teks penuh
Dokumen terkait
For the application of EC devices (supercapacitor etc.), it is desired to directly grow the CNTs onto conducting substrates to fabricate electrodes.. This procedure not only
Furthermore, as shown in Figure 2 c, when the Young’s modulus decreases due to the increase in pitting density, the effective strength of the outermost layer is one-tenth of the
Such adsorption hysteresis of water vapor has been observed in hydrophobic nanospaces.31−33Water structures in water loading and release were cluster- and monolayer-like form in
In this work, we studied the effect of 1-methyl-3- octadecylimidazolium bromide concentration on dispersion ofMWCNTsin aqueoussolution.UV–visisusuallyusedtoesti- mate thestability of
Neutralization process is used to neutralize PH from MWCNTs to 7 by washed with water and filtered using filter paper and vacuum pump, then dried by oven at 60°C for 24 hours..
The ‘‘direct’’ Friedel–Crafts acylation reaction between TMPBA and SWCNTs was carried out to afford TMPBA grafted SWCNTs TMPBA-g-SWCNT in PPA/P2O5 medium at 130°C Fig.2a.. After the
Nanotube growth direction for all of the samples a Nanotube growth direction for all of the samples b Nanotube growth direction for all of the samples c Nanotube growth direction
1 Scientific RepoRtS | 2019 9:15523 | https://doi.org/10.1038/s41598-019-52233-2 www.nature.com/scientificreports An investigation of microstructural, magnetic and microwave
