[1] J.H. Park, S.H. Hong, J.W Hong, C.K. Park, M.W. Kim, H.J Jang, D.M Lee, K.S Kim, S.M Cho, Process Development of Super-TIG Welding by Alloy 625 in 9% Nickel Steel for LNG Fuel Tank, Spring Conference of the Korean Welding and Joining Society (2018)
[2] S.K. Yun, D.H. Kim, A Study on the Structural Analysis of the Supporting System for LNG Vehicle Fuel Tank, Journal of the Korean Society of Marine Engineering (2008. 9) [3] 심규택, 김재훈, 이관희, 안병욱, 김영균, A Study on the Fatigue Crack Growth Behavior of 9% Ni Steels, 대한기계학회 2008년도 추계학술대회, 167-172p (2008. 11) [4] John N. DuPONT, Hohn C. Lippold, Samuel D. Kiser, Welding metallurgy and weldability of nickel-base alloys, 357p, A JOHN WILEY & SONS, INC., PUBLICATION (2009)
[5] 김희봉, 이창희, A Study on the Cracking Behavior in the Welds of Ni-Cr-Fe and Ni- Fe-Cr-Mo Alloys Part 1 : Solidification Cracking in the Fusion Zone,
대한용접·접합학회지, 15(4), 78-89p (1997.8)
[6] John N. DuPONT, Hohn C. Lippold, Samuel D. Kiser, Welding metallurgy and
weldability of nickel-base alloys, 210-219p, A JOHN WILEY & SONS, INC., PUBLICATION (2009)
[7] J.N. DuPONT, C.V. ROBINO, J.R. MICHAEL, M.R. NOTIS, and A.R. MARDER,
Solidification of Nb-Bearing Superalloys: Part I. Reaction Sequences, METALLURGICAL AND MATERIALS TRANSACTIONS A, VOLUME 29A (1998)
[8] Hee-Dae Im, Woong Kil, Keesam Shin, and Bon-Heun Koo, Effect of Heat Input on the Bending Crack and Microstructure of an Austenitic Stainless Steel Overlay
72
Weldment by Flux Cored Arc Welding, Korean J. Met. Mater. Vol. 51, No. 4, pp. 275-283 (2012. 5)
[9] 장웅성, 김기철, 김영천, 김상록, 김우식, Ni Alloy Welding Consumables for 9%
Nickel Steel - Welding Electrodes for Shielded Metal Arc Welding Journal of Welding and Joining 16(1), 25-37p (1998. 2)
[10] 이종봉, 한 채광, Welding Characteristics of Recently Developed 9% Ni Steel, 대한용접학회지 제13권 제3호, 34-45p (1995. 9)
[11] Guide to the Welding and Weldability of Cryogenic Steels, Document IIS/IIW-844- 87, Sub-commission IXG of Commission IX of the International Institute of Welding, the Welding Institute, UK, (1987)
[12] Nippes, E. F.; Balaguer, J. P. A Study of the Weld Heat-affected Zone Toughness of 9% Nickel Steel. Weld. Res. Suppl. September 237–243p (1986)
[13] 이종봉, 장래웅, 한재광, 안승개, 9%Ni강의 용접성(Ⅰ) - 용접부의 조직과 인성 - (Weldability of 9% Ni steel(Ⅰ) - Microstructure and toughness of welded joint - ).
대한용접학회 특별강연 및 학술발표대회 개요집, pp.51-53. (1994)
[14] Weidong Mua, Yuzhang Lia, Yan Caia, Min Wanga, Cryogenic fracture toughness of 9%Ni steel flux cored arc welds, Journal of Materials Processing Tech. 252, pp.804–812 (2018)
[15] Nippes, E. F.; Balaguer, J. P. A Study of the Weld Heat-affected Zone Toughness of 9% Nickel Steel. Weld. Res. Suppl. September, 237–243. (1986)
[16] Pense, A. W.; Stout, R. D. Fracture Toughness and Related Characteristics of the Cryogenic Nickel Steels. WRC Bulletin, pp.205.(1975)
73
[17] Strife, J. R.; Passoja, D. E. The Effect of Heat Treatment on Microstructure and Cryogenic Fracture Properties of 5 Ni and 9 Ni Steel. Met. Trans., 11A (8), 1341–1350.
(1980)
[18] Marschall, C. W.; Hehemann, R. F.; Troiano, A. R. The Characteristics of 9% Nickel Low Carbon Steel. Trans. ASM, 55 (1), 135–148. (1962)
[19] Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and
Tempered 8 and 9 percent Nickel, Designation: A 553/A 553M –95; ASTM International, 282–284. (2000)
[20] Technical Report 9% Nickel Steel: For Use at Cryogenic Temperatures; ArcelorMittal:
USA (2010)
[21] Du, W. S.; Cao, R.; Yan, Y. J.; Tian, Z. L.; Peng, Y.; Chen, J. H. Fracture Behavior of 9%
Nickel High-strength Steel at Various Temperatures Part I. Tensile Tests. Mater. Sci. Eng., 486, 611–625. (2008)
[22] Kobelco’s Welding Consumables for LNG Storage Tanks Made of 9% Ni Steel.
Kobelco Weld., 14 (2), 3–8. (2011)
[23] Brooks , C. R., Nickel base alloys, in Heat treatment, structure, and properties of nonferrous alloys , ASM International , Materials Park, OH .(1982)
[24] DuPont , J. N. , Robino , C. V. , and Marder , A. R.. Solidification of Nb-Bearing Superalloys: Part II. Pseudo Ternary Solidification Surfaces , Metallurgical and Material Transactions A , 29A : pp.2797 – 2806. (1998)
[25] John N. DuPONT, Hohn C. Lippold, Samuel D. Kiser, Welding metallurgy and weldability of nickel-base alloys, 212p, A JOHN WILEY & SONS, INC., PUBLICATION
74 (2009)
[26] Stephen Floreen, Gerhard E. Fuchs, and Walter J. Yang, The Metallurgy of Alloy 625, The Minerals, Metals & Materials Society (1994)
[27] S. M. Jones, J. F. Radavich and S. Tian "Superalloy 718", TMS, 589p (1989)
[28] Babu , S. S. , Miller , M. K. , Vitek , J. M. , and David , S. A., Characterization of the microstructure evolution in a nickel base superalloy during continuous cooling
conditions , Acta Materialia , 49 : 4149 – 4160. (2001)
[29] DuPont , J. N. , Robino , C. V. , Marder , A. R. , Notis , M. R. , and Michael , J. R..
“ Solidifi cation of Nb - Bearing Superalloys: Part I. Reaction Sequences ” ,Metallurgical and Material Transactions A , 29A : 2785 – 2796 . (1988)
[30] Rhines , F. N. Phase diagrams in metallurgy, McGraw Hill, New York, N.Y., pp. 175 – 185
[31] 정홍철, "특집 : 철강 및 비철합금의 고온균열 현상 ; 탄소강에서의 용접부
고온균열 ( Weld Hot Cracking in C-Mn Steel )," Journal of Welding and Joining, Vol. 17, No. 5, pp. 1~9, (1999)
[32] Fisher,G. J., and Maciag, R. J., in Handbook of Stainless Steels, Eds.D. Peckner and I.
M. Bernstein, McGraw-Hill, New York, p. 1. (1977)
[33] Fukakura, J., Kashiwaya, H., Mori,T., Iwasaki, S., and Arii, M., in Weldments: Physical Metallurgy and Failure Phenomena, Eds. R. J. Christoffel, E. F. Nippes, and H. D.
Solomon, General Electric Co., Schenectady, NY, p. 173. (1979)
[34] Hemsworth. B., Boniszewski. T., and Eaton. N.F., Metal Construction and British Welding Journal. 1. p5-16, (1969)
75
[35] 윤중근, "용접 고온 균열," 용접공학 하계대학교재, , pp. 131~148, (2003).
[36] Toropov VA. On the mechanism of hot cracking of welds. Metallo Obra Metallov ;6:54–58. (1957)
[37] W.S.Pelini, Stain Theory of Hot Tearing, Foundary, Vol. 80, NO. 11, p.125, (1952) [38] Apblett WR, Pellini WS. Factors which influence weld hot cracking. Weld J ;33 (2):83s–90s. (1954)
[39] J. C. Lippold, Hot cracking, in Welding metallurgy and weldability, 84-129 (2015) [40] W.I.Pumphrey, J. of Institute of Metals Vol.75, p.235, (1948)
[41] J.C.Borland, Suggested explanation of hot cracking in mild and low alloy steel welds, British Welding Journal, Vol.8, p526, (1961)
[42] N.N.Prokhorov, Lit.Proiz no.10, p.176, (1962)
[43] 정홍철, “특집 : 철강 및 비철합금의 고온균열 현상 ; 탄소강에서의 용접부
고온균열 (Weld Hot Cracking in C-Mn Steel),“ 대한용접·접합학회지, 제17권, 제5호, pp.1-9, (1999)
[44] Matsuda F. Solidification crack susceptibility of weld metal. In: David SA, Vitek JM, editors. Recent Trends in Welding Science and Technology. Metals Park, OH: ASM International;. p 127–136. (1990)
[45] O.W. Blodgett, Weld. Innovation Q., 2 (3), p. 4., (1985)
[46] Blodgett OW. Why do welds crack? How weld cracks can be prevented. Weld Innov ;2 (3):4. (1985)
[47] 대한용접학회 : 용접편람 p 42, (2008)
[48] ASM International: “Weld integrity and performance” (1997)
76
[49] Blodgett, O.W., Weld. Innovation Q., 2(3): (1985)
[50] S. C. Ernst, W.A. Baeslack III and J.C Lippold, Welding Journal, Vol. 68, No. 10, p.
418, (1989)
[51] W.A Baeslack III, W.P. Lata and S.L. West, Welding Journal, Vol. 67, No. 4, p.77, (1988)
[52] Cieslak , M. J.. The welding and solidification metallurgy of Alloy 625 ,Welding Journal , 70 : 49 s – 56 s. (1991)
[53] J.N. DuPONT, A.R. MARDER, Dilution in Single Pass Arc Welds, Download PDF Metallurgical and Materials Transactions B, Vol. 27, issue. 3, pp481-489 (1996) [54] Kotecki, D. J., Weld Dilution and Martensite Appearance in Dissimilar Metal Welding, IIW Document II-C-195-00, (2000)
[55] John C. Lippold, Welding metallurgy and weldability, ISBN 978-1-118-23070-1, 14p, (2015)
[56] Estes, C. L., and Turner, P.W., Weld. J., 43: 541s, (1964) [57] Dudas, J. H., and Collins, F. R., Weld. J., 45: 241s, (1966)
[58] J.N. DuPONT, C.V. ROBINO, J.R. MICHAEL, M.R. NOTIS, and A.R. MARDER,
Solidification of Nb-Bearing Superalloys: Part I. Reaction Sequences, METALLURGICAL AND MATERIALS TRANSACTIONS A, VOLUME 29A (1998)
[59] Cieslak , M. J.. The welding and solidifi cation metallurgy of Alloy 625 ,Welding Journal , 70 : 49 s – 56 s. (1991)
[60] 안용수, 윤병현, 이창희. 특집 : 철강 및 비철합금의 고온균열 현상 ; Ni계 초내열합금의 응고균열 ( The Solidification Cracking of Nb-containing Ni-base
77
Superalloy ). 대한용접·접합학회지, 17(5), 20-28. (1999)
[61] G. A. Knorovsky et al. : "Inconel 718: A solidification diagram" Metall. Trans. A Vol.
20A, No. 10, pp.2149-2158, (1989)
[62] DuPont , J. N. , Robino , C. V. , and Marder , A. R.. Solidifi cation of Nb-Bearing Superalloys: Part II. Pseudo Ternary Solidifi cation Surfaces , Metallurgical and Material Transactions A , 29A : pp.2797 – 2806. (1998)
[63] B. Radhakrishnan et al. : "solidification of the nickel-base superalloy 718 : A phase diagram approach" Metall. Trans. A. Vol. 20A. No.12, pp.2866-2868 (1989)
[64] 우인수, 강정윤, 西本和俊. Ni기 초내열합금 용접부의 고온균열에 관한 연구 (Ⅰ) -
용접금속의 응고균열 감수성에 미치는 Fe의 영향 - ( A Study on Hot Cracking in Ni- Base Superalloy Welds (Ⅰ) - Effect of Fe Contents on Solidification Cracking
Susceptibility in Weld Metal ). 대한용접·접합학회지, 19(6), 46-53. (2001)
[65] J.N. DuPont, C.V. Robino, and A.R. Marder: Metall. Mater. Trans. A, vol. 29A, pp.
2797-2806. (1998)
[66] J.N. DuPont, C.V. Robino, and A.R. Marder: Acta Mater., vol.46, pp. 4781-90. (1998) [67] DuPont , J. N. , Robino , C. V. , and Marder , A. R.. Solidification of Nb-Bearing Superalloys: Part II. Pseudo Ternary Solidification Surfaces , Metallurgical and Material Transactions A , 29A : pp.2797 – 2806. (1998)
[68] Hiroshi OHTANI, Mitsuhiro HASEBE and Taiji NISHIZA WA, Calculation of Fe-C, Co- C and Ni-C Phase Diagrams, Transactions ISIJ, VoL 24, (1984)