• Tidak ada hasil yang ditemukan

A brief review of layered rock salt cathode materials for lithium ion batteries

N/A
N/A
Protected

Academic year: 2024

Membagikan "A brief review of layered rock salt cathode materials for lithium ion batteries"

Copied!
1
0
0

Teks penuh

(1)

A brief review of layered rock salt cathode materials for lithium ion batteries

Abstract

Nowadays, many researchers have been studying on the layered rock salt-type structure as cathode materials for the lithium ion batteries. LiCoO2 is the most commonly use cathode material but Co is costly and toxic. Thus, alternative cathode materials which are cheaper, safer and having higher capacity are required. Replacing Co with Ni offered higher energy density battery but it raised interlayer mixing or cation disorder that impedes electrochemical properties of batteries. This paper has reviewed some recent research works that have been done to produce better and safer cathode materials from the structural perspective.

Keywords

Cathode materials; Interlayer mixing; Layered rock salt; Lithium ion batteries

Referensi

Dokumen terkait

IIT Hyderabad to collaborate on development of lithium ion batteries for electric vehicles The Indian Institute of Technology, Hyderabad, in collaboration with ItsEV Inc, plans to

Commercial LIBs employed a graphite anode, an electrolyte based on a lithium salt and a carbonate solvent, and a LiCoO2 cathode, resulting in a gravimetric energy density of about 190

Commercially used LiCoO2 and LiNiO2 are layered structure, LiMn2O4 is spinel structure and LiFePO4 is known for Olivine structure.4 The layered cathode materials such as LiMO2 is

13 1.3 Polymeric Binders in Lithium Ion Batteries 1.3.1 Introduction of polymeric binders Although remarkable improvements in the electrochemical performance of Si-based anodes

32 Recently, Lithium bisoxalatoborate LiBOB additive was also investigated to form stable surface film and serve as a sort of anion receptor on the high voltage LiNi0.5Mn1.5O4

Well-dispersed sulfur anchored on interconnected polypyrrole nano fi ber network as high performance cathode for lithium-sulfur batteries Fuxing Yina,b, Xinyi Liua,b,c, Yongguang

Abstract:New porous activated carbons with a high surface area as an anode material for lithium-ion batteries LIBs were synthesized by a one-step, sustainable, and environmentally

24 Uniform and thin gel-like polymer separator for three-dimensional 3D lithium-ion batteries Akylbek Adi1,2, Almagul Mentbayeva1,3, Kuralay Korzhynbayeva1,3, Zhumabay Bakenov1,2,3