• Tidak ada hasil yang ditemukan

Effect different limb of transformer core assemble on performance

N/A
N/A
Info
Unduh - Bebas
Protected

Academic year: 2024

Membagikan "Effect different limb of transformer core assemble on performance"

Copied!
1
0
0

Memuat.... (Lihat teks lengkap sekarang)

Unduh sekarang ( 1 Halaman )

Teks penuh

(1)

Key Engineering Materials, vol.594-595, 2014, pages 1136-1140

Effect different limb of transformer core assemble on performance

Abstract

This paper described the performance of transformer affected by different limb assembling.

The experiment that used to investigate core is no-load, short circuit and load test to find the core loss, copper loss, flux leakage at corner joint and limb and total harmonic distortion of the flux at flux density range from 0.2 T to 1.6 T, 50 Hz. From the result of this investigation shows the core loss of transformer assembled with 2 limbs is 18.45% and 32.21% better than the transformer assembled with 3 and 5 limbs respectively at a flux density of 1.6T, 50 Hz. To increase the numbers of core limb assemble will reduce the efficiency of transformer.

Keywords; 3%SiFe, Copper Loss, Core Loss, Flux Density, Limb

Referensi

Unduh sekarang ( PDF - 1 Halaman - 129.90 KB )

Dokumen terkait

Effect of irrigating fluid temperature on core body temperature during transurethral resection of the prostate

The age, resection time, weight of resected prostate, amount of irrigating fluid used, temperature in the operating theatre, core body temperature at beginning and at conclusion

Effect Of Coating Thickness On Roof Top Thermal Performance.

Therefore the objectives in this study are to study the effect of coating thickness on thermal resistance properties such as change in temperature and heat

Effect of Lubrication Environments on Wear Performance of Ball Bearing Materials.

With further increase in load, speed and distance; frictional heating may occur under air lubrication due to the interaction of the asperities of two contact surfaces

The Effect of Edm Die-sinking Parameters on Material Removal Rate of Beryllium Copper Using Full Factorial Method.

Therefore, a comprehensive study It was known that Beryllium Copper (BeCu) is used in using design of experiment (DOE) of the effect of EDM mould and die making for its high strength

Performance Evaluation of Quine-McCluskey Method on Multi-core CPU

Cache Performance Table II shows the cache load misses of L1 data cache and the corresponding miss rate for the original Quine-McCluskey method and for our proposal evaluated in a

The Effect of Core Values Akhlak Effectiveness on Employee Performance at Indonesian Sharia Bank in Bandung City

From the description of the discussion above, the results of this study provide empirical evidence that the effectiveness of the core values of AKHLAK as a basic value in the

Effect of Three Different Core Materials on Masking Ability of a Zirconia Ceramic Farhad Tabatabaian

2: Tested substrates from left to right: zirconia ceramic, non-precious gold alloy, nickel-chromium alloy and white substrate of posterior zirconia restorations on a metal post and

The Effect of Lecturers Teaching Performance on Students Satisfaction in a University

The analysis shows that both individually and together, lecturers performance that consists of learning preparation, preliminary learning activities, core learning activities, and final