• Tidak ada hasil yang ditemukan

General properties of kaolin geopolymers

N/A
N/A
Protected

Academic year: 2024

Membagikan "General properties of kaolin geopolymers"

Copied!
1
0
0

Teks penuh

(1)

General properties of kaolin geopolymers

Abstract

This paper reported the properties of kaolin geopolymers in term of the bulk density, compressive strength, qualitative observation and SEM analysis of the kaolin geopolmers.

Kaolin geopolymers were synthesized through the activation of kaolin with mixture of 8 M NaOH solution and Na2SiO3 solution at kaolin/activator ratio of 1.00 and Na2SiO3/NaOH ratio of 0.32.

The kaolin geopolymers were cured at 60 °C up to 3 days. Results showed kaolin geopolymers has bulk density in range of 1483 kg/m3-1605 kg/m3. The kaolin geopolymers have good volume stability in water. Compressive strength improved with increasing ageing. However, the strength development is very slow probably because of the limitation of the structure of kaolinite with low surface area and limited substitution of other element during reaction. Microstructures of kaolin geopolymers showed the formation of geopolymer gel and denser structure.

Keywords

Bulk density; Compressive strength; Geopolymers; Kaolin; Microstructure; Volume stability

Referensi

Dokumen terkait

The amount 10 phr of filler loading is reported to be the optimum value for the increasing properties of latex products such as crosslink density, tensile strength and

The main goal were to analyses mechanical properties (compressive strength, flexural strength and modulus of elasticity) of self- compacting concrete mix and to

The main goal were to analyses mechanical properties (compressive strength, flexural strength and modulus of elasticity) of self- compacting concrete mix and to determine

Quartz-added geopolymers displayed higher compressive strength values than that of corundum-added geopolymers due to a better reactivity shown by quartz crystalline phase. Values

Testing the physical properties consist of water content and density, while testing the mechanical properties of bamboo consists of flexural strength, tensile strength,

In this study, slump, density and compressive strength test has been used to investigate the effect of the addition of B4C on the physical and mechanical properties of radiation

ABSTRACT The objectives of this study were to compare the microhardness, flexural strength and compressive strength of a new bulk-fill composite SonicFill™ to a conventional nanohybrid

The properties of geopolymer brick/IBS brick were analyzed in term of compressive strength, water absorption and density at different aging period, which is 1st, 3rd, 7th, 28th and 60th