• Tidak ada hasil yang ditemukan

The properties of epoxy resin coated silica fillers composites

N/A
N/A
Info
Unduh - Bebas
Protected

Academic year: 2024

Membagikan "The properties of epoxy resin coated silica fillers composites"

Copied!
1
0
0

Memuat.... (Lihat teks lengkap sekarang)

Unduh sekarang ( 1 Halaman )

Teks penuh

(1)

Materials Letters, vol. 61(11-12), 2007, pages 2156-2158

The properties of epoxy resin coated silica fillers composites

Abstract

Epoxy resin coated silica fillers composites with high percentage of filler loading, such as 80 to 95 vol.%

are able to be produced by a mechanical mixing technique. The advantages of high filler loading of theses materials are noted from the thermal and flexural modulus. Apparently, the materials exhibit low coefficient of thermal expansion (CTE) at as low as or below 10 ppm/°C and high flexural modulus of above 20 GPa. In general, these promising characteristics fulfill the requirement to be used as substrate materials in electronic packaging applications.

Keywords — Ceramic filler, electronic packaging, epoxy, polymer

Referensi

Unduh sekarang ( PDF - 1 Halaman - 56.75 KB )

Dokumen terkait

Development Of CNT/SiO2 Fillers Reinforced Polyester Hybrid Composites.

Prior to the analysis of tribological properties of the hybrid polyester composites, the interaction between fillers added and matrix material are determined through

Effect Of Nano Calcium Carbonate On Epoxy Composite Reinforced Recycle Rubber.

Different weight percentage of nano calcium carbonate will give different mechanical properties to the epoxy composite.. The reinforcement of elastomers by particulate

The Mechanical Properties And Morphology Study Of The Silica-Reinforced Polyethylene (PE) Composites.

Sukacita dimaklumkan bahawa tesis yang tersebut di atas bertajuk TROPERTIES AND MORPHOLOGY STUDY OF THE SILICA- REINFORCED POLYETHYLENE (PE) COMPOSITES" mohon

MORPHOLOGICAL AND MECHANICAL PROPERTIES OF MT. KELUD VOLCANIC ASH REINFORCED POLYESTER AND EPOXY COMPOSITES | Pratiwi | Jurnal Teknik Mesin 1189 3045 1 PB

size on mechanical properties of polymeric composites with micro and nano particles in Composites Science and Technology Journal, pages 1941–1952. Volcanic ash as flux

Enhancing mode I and II interlaminar fracture toughness of carbon fiber-filled epoxy-based composites using both rice husk silica and silk fibroin electrospun nanofibers

Enhancing mode I and II interlaminar fracture toughness of carbon fiber-filled epoxy-based composites using both rice husk silica and silk fibroin electrospun nanofibers Quang-Vu

epoxy resin: fabrication and mechanical properties

Silane coupling agent with amine group grafted nano/micro- glass fi ber as novel toughener for epoxy resin: fabrication and mechanical properties Cuong Manh Vua, Quang-Vu Bachb, Le Xuan

Fabrication of adduct filled glass fiber/epoxy resin laminate composites and their physical characteristics

Effect of the SH.EG0.7 adduct on the mechanical and dielectric properties of the glass fiber-reinforced epoxy composite The epoxy resin modified with 10 phr SH.EG0.7 adduct was used as

Perbedaan Defleksi Kawat Ortodonti Nikel-Titanium dan NiTi Epoxy Resin Coated pada Perendaman dalam Saliva Buatan dan Minuman Berkarbonas

Kesimpulan dari penelitian ini yaitu terjadi penurunan gaya defleksi pada kawat Nikel-Titanium dan kawat NiTi epoxy resin coated setelah direndam dengan minuman berkarbonasi dan kawat