• Tidak ada hasil yang ditemukan

The study of forming and properties of hydrogel fibers

N/A
N/A
Protected

Academic year: 2025

Membagikan "The study of forming and properties of hydrogel fibers"

Copied!
1
0
0

Teks penuh

(1)

Project The study of forming and properties of hydrogel fibers

Author Mr.Chayapol Sungsrima

Mr.Netiphong Boonngon Miss Massirin Kruawan

Major Department of textile chemical engeneering Advisor Associate Professor Dr.Boonsri Kusuktham Academic Year 2018

Abstract

This research studied of the forming and properties of hydrogel fibers. The objectives were to study the forming of the hydrogel fibers mixed with bromothymol blue and methyl red indicator and to study the properties of the hydrogel fibers.

The hydrogel fibers was synthesized from the polymerization reaction between 2-hydroxyethyl methacrylate and diallyldimethyl ammonium chloride by using potassium per sulfate as initiator, N,N,N',N' –tetratetramethylethylenediamine as accelerator and N,N’-methylenebisacrylamide as a cross-linked.

The results showed that the hydrogel fibers mixed with bromothymol blue

indicater had the color change property better than methyl red indicator.

The 2-hydroxy ethyl methacrylate hydrogel fibers mixed with diallyldimethyl ammonium chloride had the water absorption property, elongation and recovery from blending better than unmodified one. The factor effecting the properties of the fibers was the diallyldimethyl ammonium chloride content.

Keywords hydrogel, methyl red indicator, bromothymol blueIndicator, Diallyldimethyl ammonium chloride

Referensi

Dokumen terkait

The objectives of this study were to characterize the spent tea leave fibers in terms of its physical, chemical, and thermal properties as well as the rate of heat

The destructive testing methods that will be used for testing of the sample is impact test, flexural test, hardness test and tensile test for determine the mechanical properties of

One of the major objective of this study is to analyze the distribution of some soil chemical properties (water holding capacity, salinity, total dissolved salts,

Effect of Vinyl Silane content on the mechanical properties of composite UP/BFs 100/90 products The improvement of mechanical properties when coupling agent was used, could be

ÖćøýċÖþćÿöïĆêĉìćÜÖúĒúąÿŠüîñÿöìćÜđÙöĊ×ĂÜøĂ÷đßČęĂöđĀúĘÖøćÜøëĕô Study of Mechanical Properties and Chemical Composition of Railway Weld Joint ßîĉêøćǰéĞćøÜÖĉÝ1, ĔĀöŠǰîšĂ÷óĉìĆÖþŤ2*,

The magnetic properties such as saturation magnetization Ms, remanence magnetization Mr, coercive field Hc, effective anisotropy constant Keff, anisotropy field Ha, and squareness

[23] Broom grass Water retting for 4 hours, extraction of fiber manually, then the fibers are dried 7 days, oven 70°C for 2 hours [17] Corn husks Water retting, corn husks

We studied how adding DPF and r-PET fibers to UP/r-PET/DPF composites affected their flexural, morphological, thermal, dynamical mechanical, and water uptake properties.. Further, we