Modeling of the Thermomechanical Behavior, Damage, and Fracture of High
22.5 Conclusions
Acknowledgements The authors gratefully acknowledge the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) for funding the research in the framework of the Collaborative Research Center “TRIP-Matrix-Composite”, (project number 54473466—SFB 799, subproject C5).
In addition the authors thank the involved staff from SFB 799 and from the Institute of Mechanics and Fluid Dynamics (TU Freiberg) as well as Dr. Uwe Mühlich for their collaboration and numerous fruitful discussions.
References
1. H. Biermann, U. Martin, C.G. Aneziris, A. Kolbe, A. Müller, W. Schärfl, M. Hermann, Adv.
Eng. Mater.11, 1000 (2009)
2. D. Ehinger, L. Krüger, U. Martin, C. Weigelt, C.G. Aneziris, Steel Res. Int.82, 1048 (2011) 3. D. Ehinger, L. Krüger, U. Martin, C. Weigelt, C.G. Aneziris, Int. J. Solids Struct.66, 207 (2015) 4. C. Weigelt, C.G. Aneziris, H. Berek, D. Ehinger, U. Martin, Adv. Eng. Mater.14(1–2), 53
(2012)
5. A. Jahn, A. Kovalev, A. Weiß, S. Wolf, L. Krüger, P.R. Scheller, Steel Res. Int.82, 39 (2011) 6. S. Martin, S. Wolf, U. Martin, L. Krüger, Solid State Phenomen.172–174, 172 (2011) 7. M. Linderov, C. Segel, A. Weidner, H. Biermann, A. Vinogradov, Mat. Sci. Eng. A597, 183
(2014)
8. C. Ullrich, S. Martin, C. Schimpf, A. Stark, N. Schell, D. Rafaja, Adv. Eng. Mater.21(5), 1801101 (2019)
9. S. Prüger, A. Seupel, M. Kuna, Int. J. Plast.55, 182 (2014)
10. S. Wolf, S. Martin, L. Krüger, U. Martin, Mat. Sci. Eng. A594, 72 (2014)
11. A. Seupel, R. Eckner, A. Burgold, M. Kuna, L. Krüger, Mat. Sci. Eng. A662, 342 (2016) 12. A. Seupel, M. Kuna, inProceedings of the 14th International Conference on Computational
Plasticity - Fundamentals and Applications, COMPLAS 2017(2017), pp. 576–587 13. M.P. Miller, D.L. McDowell, Int. J. Plast.12(9), 875 (1996)
14. J. Serri, M. Martiny, G. Ferron, Int. J. Mech. Sci.47(6), 884 (2005)
15. I. Papatriantafillou, M. Agoras, M. Aravas, G. Haidemenopoulos, Comput. Method. Appl. M.
195, 5094 (2006)
16. L. Mehlhorn, S. Prüger, S. Soltysiak, U. Mühlich, M. Kuna, Steel Res. Int.82(9), 1022 (2011) 17. S. Prüger, L. Mehlhorn, S. Soltysiak, M. Kuna, Comp. Mater. Sci.64, 273 (2012)
18. S. Prüger, L. Mehlhorn, U. Mühlich, M. Kuna, Adv. Eng. Mater.15(7), 542 (2013)
19. A. Burgold, M. Kuna, S. Prüger, Procedia Mater. Sci.3(0), 461 (2014). 20th European Con- ference on Fracture
20. A. Burgold, M. Kuna, S. Prüger, Eng. Fract. Mech.138, 169 (2015) 21. M. Kuna, A. Burgold, S. Prüger, Int. J. Fract.193, 171 (2015)
22. S. Prüger, Thermomechanische Modellierung der dehnungsinduzierten Phasenumwand- lung und der asymmetrischen Verfestigung in einem TRIP-Stahlguss. Ph.D. thesis, TU Bergakademie Freiberg (2016). (in German)
23. S. Forest, J. Eng. Mech.135(3), 117 (2009) 24. P. Germain, SIAM J. Appl. Mech.25(3), 556 (1973)
25. B.D. Coleman, W. Noll, Arch. Ration. Mech. An.13(1), 167 (1963)
26. J. Lemaitre, J.L. Chaboche,Mechanics of solid materials(Cambridge University Press, 1998) 27. H. Hallberg, P. Håkansson, M. Ristinmaa, Int. J. Plasticity23, 1213 (2007)
28. J. Lemaitre, Nucl. Eng. Des.80, 233 (1984)
29. H. Xiao, O.T. Bruhns, A. Meyers, Acta Mech.124, 89 (1997) 30. H. Xiao, O.T. Bruhns, A. Meyers, Acta Mech.138, 31 (1999)
31. A. Eshraghi, K.D. Papoulia, H. Jahed, J. Appl. Mech.80(2), 021027 1 (2013)
32. E. Diamantopoulou, W. Liu, C. Labergere, H. Badreddine, K. Saanouni, P. Hu, Int. J. Damage Mech.26(2), 314 (2017)
33. R.H.J. Peerlings, R. de Borst, W.A.M. Brekelmans, J.H.P. de Vree, Int. J. Numer. Meth. Eng.
39, 3391 (1996)
34. A. Seupel, G. Hütter, M. Kuna, Eng. Fract. Mech.199, 41 (2018) 35. A. Seupel, M. Kuna, Int. J. Damage Mech.28(8), 1261 (2019) 36. I. Tamura, Met. Sci.16, 245 (1982)
37. G.B. Olson, M. Cohen, Metall. Trans. A6A, 791 (1975)
38. R.G. Stringfellow, D.M. Parks, G.B. Olson, Acta Metall. Mater.40(7), 1703 (1992) 39. Y. Tomita, T. Iwamoto, Int. J. Mech. Sci.37(12), 1295 (1995)
40. T. Iwamoto, T. Tsuta, Y. Tomita, Int. J. Mech. Sci.40, 173 (1998)
41. U. Ahrens, Beanspruchungsabhängiges Umwandlungsverhalten und Umwandlungsplastizität niedrig legierter Stähle mit unterschiedlich hohen Kohlenstoffgehalten. Ph.D. thesis, TU Pader- born (2003). (in German)
42. K. Nagayama, T. Terasaki, K. Tanaka, F.D. Fischer, T. Antretter, G. Cailletaud, F. Azzouz, Mat.
Sci. Eng. A308, 25 (2001)
43. F.D. Fischer, G. Reisner, E. Werner, K. Tanaka, G. Cailletaud, T. Antretter, Int. J. Plast.16, 723 (2000)
44. M. Berveiller, F.D. Fischer (eds.),Mechanics of Solids with Phase Changes(Springer, 1997) 45. R. Mahnken, A. Schneidt, T. Antretter, Int. J. Plast.25, 183 (2009)
46. R. Mahnken, A. Schneidt, Arch. Appl. Mech.80, 229 (2010)
47. S. Prüger, M. Kuna, S. Wolf, L. Krüger, Steel Res. Int.82(9), 1070 (2011)
48. R. Zaera, J.A. Rodríguez-Martínez, A. Casado, J. Fernández-Sáez, A. Rusinek, R. Pesci, Int.
J. Plast.29, 77 (2012)
49. H. Hallberg, P. Håkansson, M. Ristinmaa, Int. J. Solids Struct.47(11–12), 1580 (2010) 50. A. Seupel, M. Kuna, Appl. Mech. Mater.784, 484 (2015)
51. S. Martin, Deformationsmechanismen bei verschiedenen Verformungstemperaturen in austeni- tischem TRIP/TWIP-Stahl. Ph.D. thesis, TU Bergakademie Freiberg (2013). (in German) 52. S. Prüger, M. Kuna, Proc. Appl. Math. Mech.11, 425 (2011)
53. S. Prüger, M. Kuna, K. Nagel, H. Biermann, Computational Plasticity XI Fundamentals and Applications 869–881 (2011)
54. P.P. Castañeda, P. Suquet, Adv. Appl. Mech.34, 172 (1997)
55. F. Lani, Q. Furnémont, T.V. Rompaey, F. Delanney, P.J. Jaques, T. Pardoen, Acta Mater.55, 3695–3705 (2007)
56. J.R. Rice, D.M. Tracey, J. Mech. Phys. Solids17, 201 (1969) 57. A.L. Gurson, J. Eng. Mater. Technol.44, 2 (1977)
58. M. Kuna, S. Wippler, Eng. Fract. Mech.77, 3635 (2010) 59. N. Aravas, Int. J. Numer. Meth. Eng.24, 1395 (1987) 60. A.C.F. Cocks, J. Mech. Phys. Solids37(6), 693 (1989) 61. J. Besson, Int. J. Damage Mech.19, 3 (2010)
62. D. Kulawinski, S. Ackermann, A. Seupel, T. Lippmann, S. Henkel, M. Kuna, A. Weidner, H.
Biermann, Mat. Sci. Eng. A642, 317 (2015)
63. S. Wolf, Temperatur- und dehnratenabhängiges Werkstoffverhalten einer hochlegierten CrMnNi-TRIP/TWIP-Stahlgusslegierung unter einsinniger Zug- und Druckbeanspruchung.
Ph.D. thesis, TU Bergakademie Freiberg (2012). (in German) 64. A.M. Beese, D. Mohr, Acta Mater.59, 2589 (2011)
65. C. Garion, B. Skoczen, Int. J. Damage Mech.12, 313 (2003)
66. S.W. Yoo, C.S. Lee, W.S. Park, M.H. Kim, J.M. Lee, Comp. Mater. Sci.50, 2014 (2011) 67. C.S. Lee, B.M. Yoo, M.H. Kim, J.M. Lee, Int. J. Damage Mech.22(1), 95 (2012) 68. J. Lian, M. Sharaf, F. Archie, S. Münstermann, Int. J. Damage Mech.22(2), 188 (2013) 69. J. Mediavilla, R.H.J. Peerlings, M.G.D. Geers, Comput. Method. Appl. M.195, 4617 (2006) 70. B. Vandoren, A. Simone, Comput. Method. Appl. M.332, 644 (2018)
71. L. Krüger, S. Wolf, U. Martin, P. Scheller, A. Jahn, A. Weiß, DYMAT 1069–1074 (2009) 72. L. Krüger, S. Wolf, S. Martin, U. Martin, A. Jahn, A. Weiß, P.R. Scheller, Steel Res. Int.32(8),
1087 (2011)
73. R. Zaera, J.A. Rodríguez-Martínez, D. Rittel, Int. J. Plast.40, 185 (2013)
74. J. Hutchinson, J. Mech. Phys. Solids16(1), 13 (1968) 75. J.R. Rice, G.F. Rosengren, J. Mech. Phys. Solids16, 1 (1968) 76. R. McMeeking, J. Mech. Phys. Solids25(5), 357 (1977) 77. H. Yuan, G. Lin, A. Cornec, Int. J. Fract.71(3), 273 (1995)
78. R.G. Stringfellow, Mechanics of Strain-Induced Transformation Toughening in Metastable Austenitic Steels. Ph.D. thesis, Massachusetts Institute of Technology (1990)
79. G. Hütter, L. Zybell, U. Mühlich, M. Kuna, Comp. Mater. Sci.80, 61 (2013)
80. M.E. Gurtin,Configurational Forces as Basic Concepts of Continuum Physics(Springer, New York, 2000)
81. R. Kienzler, G. Herrmann,Mechanics in Material Space(Springer, Berlin Heidelberg, 2000) 82. G.A. Maugin,Configurational forces: thermomechanics, physics, mathematics, and numerics
(CRC Press, 2011)
83. T. Nguyen, S. Govindjee, P. Klein, H. Gao, J. Mech. Phys. Solids53(1), 91 (2005) 84. B. Näser, M. Kaliske, R. Müller, Comput. Mech.40(6), 1005 (2007)
85. N. Simha, F. Fischer, G. Shan, C. Chen, O. Kolednik, J. Mech. Phys. Solids56(9), 2876 (2008) 86. O. Kolednik, R. Schöngrundner, F. Fischer, Int. J. Fract.187(1), 77 (2014)
87. A. Burgold, S. Henkel, S. Roth, M. Kuna, H. Biermann, Mater. Test.60(4), 341 (2018) 88. S. Henkel, D. Holländer, M. Wünsche, H. Theilig, P. Hübner, H. Biermann, S. Mehringer, Eng.
Fract. Mech.77(11), 2077 (2010)
89. A. Burgold, S. Roth, M. Kuna, Advances in Fracture and Damage Mechanics XVII 167–172 (2018)
90. S. Roth, G. Hütter, M. Kuna, Int. J. Fract.188(1), 23 (2014)
91. S. Roth, Entwicklung und Implementierung zyklischer Kohäsivzonenmodelle zur Simulation von Werkstoffermüdung. Ph.D. thesis, TU Bergakademie Freiberg (2015). URLhttp://nbn- resolving.de/urn:nbn:de:bsz:105-qucosa-209735. (in German)
92. X.P. Xu, A. Needleman, Modell. Simul. Mater. Sci. Eng.1(2), 111 (1993)
93. M. Hauser, M. Wendler, S.G. Chowdhury, A. Weiß, J. Mola, Mater. Sci. Tech.31(12), 1473 (2015)
94. G. Hütter, T. Linse., U. Mühlich, M. Kuna, Int. J. Solids Struct.50, 662 (2013) 95. T. Linse, G. Hütter, M. Kuna, Eng. Fract. Mech.95, 13 (2012)
Open Access This chapter is licensed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.
The images or other third party material in this chapter are included in the chapter’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the chapter’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.