Bab ini membahas tentang kesimpulan yang diperoleh berdasar pengolahan data dan pembahasan mengenai Thermal GCC, Panel dinding komposit berbahan dasar sekam padi dan kertas HVS dengan skrin dari serat
fiber. Pemberian saran dimaksudkan untuk pengembangan penelitian lebih lanjut.
5.1 SIMPULAN
Berdasarkan penelitian yang telah dilakukan maka dapat diambil kesimpulan sebagai berikut:
1. Interaksi antar faktor tidak berpengaruh terhadap kekuatan bending dan impak Komposit Thermal GCC.
2. Nilai konduktivitas panas yang dimiliki Thermal GCC memiliki sifat hambat panas dibanding dengan kayu mahoni berdasar rata-rata kekuatan bending tertinggi 0,338 W/m0C mampu menghambat panas sebesar 23,550C/W sedangkan rata-rata kekuatan impak tertinggi memiliki konduktivitas panas 0,482 W/m0C mampu menghambat panas 24,780C/W.
3. Komposit Thermal GCC sangat mungkin menjadi papan penghambat panas yang handal dan murah karena diproduksi dari bahan-bahan limbah yang tak terpakai, dikarenakan memiliki nilai kekuatan impak dan bening yang sesuai sesuai dengan standar.
5.2 SARAN
Saran yang dapat diberikan berdasarkan hasil penelitian ini adalah diharapkan produk komposit Thermal GCC ini didaftarkan pada balai inkubator teknologi untuk pengembangan komersialisasi. Sehingga diharapkan komposit sandwich ini dapat digunakan secara massal, dapat menjaring tenaga kerja, serta limbah sekam padi dan kertas HVS dapat ditangani dengan baik.
Amarullah, Amir. 2010, “Luas Hutan Indonesia Semakin Berkurang”,
http://www.vivanews.com, 28 Agustus 2014
Anonim, 2004, “Pengolahan Tepung Tapioka”. http://www.bi.go.id/web/id/, 28 Agustus 2014
Anonim, 2004, http://Agribisnis.bi.go.id, 3 0 Agustus 2014 Anonim, 2010, http://cafepojok.com, 29 Agustus 2014`
ASTM D 1037, “Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials”, Philadelphia, PA: American Society for Testing and Materials
ASTM D 5942-96, “Standard Test Methods for Determinating Charpy Impact Strength of Plastics”, New York, NY: American Society for Testing and Materials
Balitbang. (2013), “Laporan Akuntabilitas Kinerja Pusat Penelitian dan Pengembangan Tanaman Pangan”. Jakarta : Kementrian Pertanian.
Gibson, O. F., 1994, ” Principle of Composite Materials Mechanics”, McGraw- Hill Inc., New York, USA.
Nugroho, Ipudatu. Y. A., 2011. “Thermal GCC (Green Core Composite), Panel Dinding Komposit Penghambat Panas Berbahan Dasar Limbah Sekam Padi Dan Kertas Hvs Sebagai Solusi Peningkatan Kualitas Lingkungan Dalam Ruangan Dan Penanganan Limbah Gabah Kering Dan Kertas”. Surakarta: Universitas Sebelas Maret.
Kementerian Pertanian, “Pengembangan Usaha Pengolahan Tepung Tapioka”, Jakarta, 2005
Kuru, George. 2005, “Penilaian FAO Mengenai Permintaan Kayu dan Penawaran (Penyediaan) Kayu di Indonesia”, FAO, New York. Schwartz, M.M., 1984, “Composite Materials Handbook”, McGraw-Hill Inc, New York.
Prasad C.S., Maiti K,N,, Venugopal R., (2001),
JUDUL:
THERMAL GCC (GREEN CORE COMPOSITE), PANEL DINDING KOMPOSIT PENGHAMBAT PANAS BERBAHAN DASAR LIMBAH SEKAM PADI DAN KERTAS HVS SEBAGAI SOLUSI PENINGKATAN KUALITAS LINGKUNGAN DALAM RUANGAN DAN
PENANGANAN LIMBAH GABAH KERING DAN KERTAS
OLEH :
Silvester Adi Surya Herjuna (I0311031 / 2011)
Asal Universitas :
UNIVERSITAS SEBELAS MARET
Karya tersebut tidak sedang diikut sertakan dalam kompetisi yang lain maupun pernah memenangkan perlombaan sejenis serta telah memenuhi kaidah tata cara maupun norma penulisan yang berlaku, dan karya ini adalah hasil karya kami sendiri, dan semua sumber baik yang dikutip maupun dirujuk telah kami nyatakan dengan benar
Surakarta, 01 Mei 2015 Yang Membuat Pernyataan
Ketua TIM
(Silvester A.S. Herjuna) NIM I0311031
Tempat, Tanggal Lahir : Jenis Kelamin : Alamat : No. Telepon : Email : Klaten, 24 November 1993 L
Jalan Merbabu 4 Nusukan, Solo
+62 271 647069
silvester@ft.uns.ac.id
Pendidikan Formal
1999 - 2005: SD Kanisius Keprabon 02 Surakarta 2005 - 2008: SMPN 1 Surakarta
2008 - 2011: SMAN 4 Surakarta
2011 – now : S-1 Industrial Engineering in Sebelas Maret University, Surakarta
Pengalaman Organisasi
2009 – 2010: Chairman in Department of Creative at OSIS SMAN 4 Surakarta 2009 – 2011: Editor in chief at SMAN 4’s Magazine
2010 – 2011: Vice President of Schools Magazine Forum in Surakarta (FORMASTA)
2011 – 2012: Research and Development of Industrial Engineering Student Associations (HMTI) UNS
2011 – 2013: Department of Communication and Information at BEM FT UNS 2012 – 2014: Department of Communication and Information at SIM UNS
Penghargaan
2011 : Finalist of Nanoversion Competition (ITS) 2012 : Finalist of Goship Competition (UAJY) 2013 : Finalist of ACCOUNTS Competition (Unand) 2013 : Finalist of YORECO Competition (UNP) 2014 : 3rd of YORECO Competition (UNP)
- Pengaruh Pancasila di Indonesia saat ini (2012) - Ketidakadilan di Indonesia (2012)
- Pemanfaatan Sampah Biomassa dalam Penanganan Sampah di Solo (2014) - Aplikasi Sistem Rantai Pasok untuk Meningkatkan Produktivitas
Budidaya Udang (2014)
Dr. Wahyudi Sutopo, S.T., M.Si.
Office :
Laboratory of Logistics System and Business,
Department of Industrial Engineering, Sebelas Maret University Jalan Ir. Sutami No. 36ª, Kentingan, Surakarta, 57126, INDONESIA Tel/Fax. : (+62)(271) 632110,
Mobile : (+62) 815 487 47464,
E-mail : wahyudisutopo@gmail.com and sutopo@uns.ac.id.
A. Education:
1. Doctor (Dr.) of Supply Chain Management, Bandung Institute of Technology, Sept. 2009.
2. Master in Management Studies (M.Si.), University of Indonesia, Aug. 2004. 3. Bachelor Degree in Industrial Engineering (S.T.), Bandung Institute of
Technology, Sept. 1999.
B. Employment:
1. Assistant Professor, Department of Industrial Engineering, Sebelas Maret University, April 2008 – present.
2. Lecturer, Department of Industrial Engineering, Sebelas Maret University, August 2006 – March 2008.
3. Assistant Lecturer, Department of Industrial Engineering, Sebelas Maret University, December 2003 – July 2006.
4. Visiting Lecturer on Industrial Management Course, Department of Chemical Engineering, Sebelas Maret University, 2005 – 2007.
5. Part-time Lecturer, Pratama Mulia Polytechnic, Surakarta, 2004 – 2007. 6. Part-time Lecturer, Industrial Engineering Department, Krisnadwipayana
University, Jakarta, 2001 – 2002.
7. Product Planner Section Head, Creation Centre Division, PT. Panasonic Manufacturing Indonesia, Jakarta, 2002 – 2003.
8. Product Engineer–Refrigerator Division, PT. Panasonic Gobel, Jakarta, 2000– 2002.
C. Research Interest:
Supply chain design and performance evaluation, Logistics Management, Inventory and Distribution, Engineering Economy and Cost Analysis, and Industrial Engineering Education
1. Cost Analysis and Estimation, 2005-2008,
2. Written and Professional Communication, 2004 -2008, 3. Management, 2005-2007,
5. Financial Management, elective course 2004-2007,
6. Performance Measurement System, elective course 2005-2008.
D. Refereed Journal Articles (International):
Sutopo, W., Nur Bahagia, S., Cakravastia, A. and Arisamadhi, TMA., (2010), Price Stabilization Using Buffer Stocks in Duopoly-Like Market with Consider Expectation of Stakeholders, ASOR Bulletin,
Vol. 29, No.4, pp. 60-72, (ISSN0812-860X | eISSN1446-6678). Sutopo, W., Nur Bahagia, S., Cakravastia, A. and Arisamadhi, TMA., (2009), A Dynamic Buffer Stocks Model for Stabilizing Price of Staple Food with Volatility Target, The International Journal of Logistics and Transport (IJLT), Vol. 3, No.
2, pp. 149-160 (ISSN 1906-0521).
E. Refereed Proceedings (International Conferences):
1. Sutopo, W., Nur Bahagia, S., Cakravastia, A. and Arisamadhi, TMA. , (2010), A Buffer Stocks Model for Stabilizing Price of Staple Food with Considering Non Speculative Wholesaler, Accepted in Proceedings of the 2010 International Conference of Manufacturing Engineering and Engineering Management (ICMEEM),(ISBN: 978-988-17012-9-9), June 30- July 02, 2010, London, UNITED KINGDOM.
2. Sutopo, W. Putra, B, and Wiyono, DS., (2010), An Interactive Web-based
Application as Educational Tool for SCM Course by Using FOSS, Proceedings of the International Conference on Open Source for Higher Education (ICOSic), p.p.
55 –60, (ISBN 979-498-560-0), March 15, 2010, Surakarta, INDONESIA.
3. Sutopo, W., Nur Bahagia, S., Cakravastia, A. and Arisamadhi, TMA. , (2009), A Buffer Stocks Model for Stabilizing Price in Duopoly-Like Market, Proceedings of the 2nd Asia Pacific Conference on Manufacturing System (APCOMS) Conference,
p.p. IV.9 –IV.16, (ISBN 0854-431X), November 4th-5th 2009, Yogyakarta, INDONESIA.
4. Sutopo, W., Nur Bahagia, S., Cakravastia, A. and Arisamadhi, TMA., (2009), A
Buffer Stocks Model For Stabilizing Price With Considering The Expectation Stakeholders In The Staple-Food Distribution System, Proceedings 20th National Conference of Australian
Gold Coast, AUSTRALIA.
5. Sutopo, W. and Nur Bahagia, S., (2008), An Inventory Model for Deteriorating Commodity under Stock Dependent Selling Rate,
Proceedings of the 9th Asia Pacific Industrial Engineering and
Management Systems (APIEMS) Conference, pp. 1152-1159
(ISBN 978-979-18925-0-6), December 3-5, 2008, Bali, INDONESIA.