Failure Analysis Of Conductive Paint Coating Using Electrochemistry Method.
Teks penuh
Dokumen terkait
Manufacturing works common issues in machining process that combines coating with cutting tool is the need for accurate and convenient models in order to minimize the risks
Based on Table 10, it can be concluded that the max feature with the highest accuracy is 8,000 for manual labeling data and 10,000 for system labeling data which will then become
Discussion In accordance with the result above, it was clearly proved that role play is effective technique which could be applied in order to improve students’ speaking skill and
2.The accuracy results of KNN 6 Label using TF-IDF In Figure 2, it can be observed that the highest accuracy is obtained from the data splitting of 80:20, which is 58%.. Previous
From the results of testing the thickness of the galvanic layer using a microntest thickness test tool on each carbon steel specimen, it can be seen that the highest average thickness
After obtaining the highest RPN value from the results of the FMEA-AHP calculation, it is known that the failure mode that has the most potential to cause the weld joint to be rejected
Based on the obtained data, the highest percentage of positive sentiment was for Ganjar Pranowo - Mahfud MD at 69.16%, and the highest negative sentiment was for Prabowo Subianto -
The results of this study are 1 the failure that occurs in this superheater pipe is the occurrence of corrosion and leakage, 2 after heat treatment with a temperature of 8500C on the
