• Tidak ada hasil yang ditemukan

Assessment Of Fuse Deposition Modeling (FDM) Machine And 3D Modeling Machine.

N/A
N/A
Info
Unduh - Bebas
Protected

Academic year: 2017

Membagikan "Assessment Of Fuse Deposition Modeling (FDM) Machine And 3D Modeling Machine."

Copied!
24
0
0

Memuat.... (Lihat teks lengkap sekarang)

Unduh sekarang ( 24 Halaman )

Teks penuh

(1)
(2)
(3)
(4)
(5)
(6)
(7)

Vl

ABSTRACT

Development in Rapid Prototyping Technology is increasing due to high

requirement for better quality, durability and manufacturability. Rapid prototyping

technology is one of the alternative processes that have received considerable

attention from industry recently. In industry, the process is potential to be as an

option to developed prototyping model before produced a real product. This report

overviews the state of the Assessment of the FDM machine with the 3D modeling

Machine. The assessment both of the machines provided the comparison of build

time, surface finish and accuracy of the machine. This report also has briefly about

the rapid prototyping process and techniques providing the Steriolithograpy

machine, 3d printing, FDM machine and 3D modeling machine. This report also

explains about the experimental work for assessment of Rapid prototyping machine,

(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
(24)

Referensi

Unduh sekarang ( PDF - 24 Halaman - 4.23 MB )

Garis besar

Assessment Of Fuse Deposition Modeling (FDM) Machine And 3D Modeling Machine.

Dokumen terkait

3D Simulation Of 2-Stroke And 4-Stroke Engine.

This project will be very useful product to be used in every Sekolah Menengah Teknik all over Malaysia as a new learning method to attract students' interest to the

THE DEVELOMPENT OF TECHNOLOGY APPLICATION BASED MATHEMATICS LEARNING TOOLS ON REAL NUMBERS OPERATIONS AT THE VOCATIONAL SCHOOL OF TECHNOLOGY AND ENGINEERING.

1. This research and development project using modified Four-D model had successfully produced a prototype of learning tools for teaching technology based mathematics in

FINANCIAL ASSESSMENT OF ALCO ENGINE RESTORATION.

Crude oil produced from several PT. XYZ fields in Riau will be sent to Gathering Stations and then collected to Dumai storage tank before lifted to Offtakers. It came from domestic

Where To Find Good Quality Low Cost Electronics Computer Products

A good option would be to buy your technology products of the Internet by using an electronics or computer product price comparison guide before you make a purchase.. This is a

MODELING SATISFACTION AND BEHAVIORAL INTENTION OF MALAYSIAN FINE DINING RESTAURANTS CONSUMERS

This study examined a mediating model of the relationship between the restaurant service/product dimensions, marketing dimension centred on customer- based brand equity constructs,

Parameter optimization of fused deposition modeling process for 3D printed prosthetic socket using PCR-TOPSIS method

Thus, this research studied on the optimization of printing parameters including infill percentage, layer height and nozzle diameter to obtain satisfactory 3D printed socket in terms of

Optimization of the 3D Printing Parameters on Dimensional Accuracy and Surface Finishing for New Polyamide 6 and Its Composite Used in Fused Deposition Modeling (FDM) Process

Optimization of the 3D Printing Parameters on Dimensional Accuracy and Surface Finishing for New Polyamide 6 and Its Composite Used in Fused Deposition Modeling FDM Process Tuan

Tracking of 2D or 3D Irregular Movement by a Family of Unscented Kalman Filters

Multiple Object Tracking in Real Data In this section we report on the performance of UKF- supported tracking for multiple larvae using the 2DT model, and for multiple pedestrians in