Improve Manufacturing Process By Using Line Balancing To Reduce Cycle Time.
Bebas
24
0
0
Teks penuh
Dokumen terkait
The title of this project “Poka Yoke jig implementation to improve productivity at manufacturing industry”, Poka Yoke process function is to avoid problems during
Particularly, by reducing the cycle (takt) time through equalizing the loads on the workstations [15] where each of stations on the line are ideally should receive an equal
To analyze the production line, we use a develop simulation tool, called Fact- Model, to modeling the production line (with the graph of critical path network and working time) and the
In addition, witness simulation software will be used as the line balancing tool will be used to improve the production line.. 1.5
The production line balancing method is used to balance the cycle time in the manufacturing industry.. The result of balancing this production line can result in a higher level
This paper addresses the development of a design support tool based on mathematical model related to cycle time, modeling a multi-stage, multi-product production line system and it
c Observing The result of learning process to improve the student’s speaking performance by using cooperative learning strategy in cycle 1 was rising than before.. It can be seen from
ASSEMBLY LINE OPTIMIZATION USING LINE BALANCING APPROACH TO REDUCE TAKT TIME AND LEAD TIME IN ELECTRICAL COMPANY Page 89 of 101 Ivander Arisito Sudarnoto cases," International Journal
