• Tidak ada hasil yang ditemukan

Application of Particle Swarm Optimization Method for Batik Production Process

N/A
N/A
Info
Unduh - Bebas
Protected

Academic year: 2017

Membagikan "Application of Particle Swarm Optimization Method for Batik Production Process"

Copied!
5
0
0

Memuat.... (Lihat teks lengkap sekarang)

Unduh sekarang ( 5 Halaman )

Teks penuh

Loading

Gambar

Fig. 2 shows the concept of optimization using PSO. The modified velocity of each particle is calculated based on the personal initial velocity,
Fig. 2. The concept of optimization using PSO.
Table II shows the raw material, process time, and energy in batik process production before

Referensi

Unduh sekarang ( PDF - 5 Halaman - 4.05 MB )

Dokumen terkait

A Comparative Study Of Hybridization Method Of Particle Swarm Optimization (PSO) Family For Network Reconfiguration.

minimum power loss and best computing time performances. Moreover , the impact of the performances of the PSO Family algorithms on the total cost saves also have not

Application of Particle Swarm Optimization in Optimizing Stereo Matching Algorithm’s Parameters for Star Fruit Inspection System.

The hardware setup consists of several components: vision housing structure, camera holder, camera, conveyor, conveyor structure, vision housing, lamp, mirror, slider,

An Experimental Study of the Application of Gravitational Search Algorithm in Solving Route Optimization Problem for Holes Drilling Process.

(2004) Optimal path for automated drilling operations by a new Heuristic approach using particle swarm optimization, International Journal of Production research,

Process simulation, optimization and economic valuation of waste tyre pyrolysis for fuel production.

According to Alsaleh and Sattler 2014, tyre pyrolysis process is strongly driven by the reactor type used, reactor temperature, heating rate, particle size, feedstock composition,

Application of porous titanium in prosthesis production using a moldless process: Evaluation of physical and mechanical properties with various particle sizes, shapes, and mixing ratios

www.elsevier.com/locate/jmbbm Available online at www.sciencedirect.com Research Paper Application of porous titanium in prosthesis production using a moldless process: Evaluation of

View of Stowage Planning System for Ferry Ro-Ro Ships Using Particle Swarm Optimization Method

312 INTENSIF: Jurnal Ilmiah Penelitian dan Penerapan Teknologi Sistem Informasi This study aims to implement the Particle Swarm Optimization method in automating stowage arrangements in

The Optimization Problem of Batik Cloth Production with Fuzzy Multi-Objective Linear Programming and Application of Branch and Bound Method

Conclusion The optimization problem of batik cloth production at Rumah Batik Mentari is analyzed through the Fuzzy Multi Objective Linear Programming FMOLP model by considering two

Optimization of Process Parameters for A Wind Turbine in A Ducting System Through The Taguchi-Pareto-DEMATEL Method

2021 Invelox wind turbine Ducted wind turbine The angle of exit diffuser and throat section velocity Experimental analysis Efficiency and rotor torque 6 Abolfazl