• Tidak ada hasil yang ditemukan

Automatic Switch Controller.

N/A
N/A
Protected

Academic year: 2017

Membagikan "Automatic Switch Controller."

Copied!
24
0
0

Teks penuh

(1)
(2)
(3)
(4)
(5)
(6)
(7)

vii

ABSTRACT

This system is designed to control the usage of electricity for a particular room. The system is either to switch ON or OFF the lamp and air-conditioner automatically due to existence of people going in or out from the room. The detector employs an infrared detector for detecting the number of persons entering and leaving the room. Then, the PIC will act as a counter to count the number of people in the room and will display it through LCD display. When the system senses the existence of people in the room, it will automatically turns the light and air-conditioner ON. In other word, it detects the existences of people in the room and avoids the problem of having a manual switch controller where people maybe forget to switch OFF the light and it may lead to electrical wastes.

(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
(24)

Referensi

Dokumen terkait

presence of mail with ease without going to the post box regularly and to check it. Sometimes, people tend to forget to pick up letters or maybe just do not

Therefore, the “Automatic Traffic Light Controller for Ambulance” is used to help the ambulance crossing the traffic light during emergency situation.. Automatic traffic

This Automatic Railway Gate Controller system was operated after signal received from the ZigBee Transmitter then the ZigBee Receiver will remain train is coming at

The information that will be focused on this chapter is about some reference circuit of automatic controlled room temperature and its main components that to be used...

conditioner size, room size and type of controller that been used. Besides,

The switch position on 1, the Simulink design without a controller, with a conventional PID controller (PID-konv), with a Matlab Auto tuning PID controller