Electrosynthesised NiSe2 Thin Films For Photoelectrochemical (PEC) Applications.
Bebas
24
0
0
Teks penuh
Dokumen terkait
Subsequently, Raman microprobe measurements were used to study the changes in the Raman scattering modes of KNN thin films prepared with different yttrium
/ Synthesis and Study of ZnO Thin Films Using CVD J Nanostruct 121: 1-11, Winter 2022 Sensitivity Measurement of Waveguide Sensor To investigate the response of the waveguide sensor
The memory effect can be observed from the current – voltage characteristics of metal – insulator – metal MIM structure reversely changes between the high resistance state HRS and the
Equation 1.3 shows a modified form of the diode equation that can be used to account for the effect of increased surface area on device performance: Voc= nkBT q ln Jph γJo 1.3
Structural properties characterized using x-ray diffraction and microscopy techniques, Apparent densities of the prepared MTO ceramics measured by using Archimedes's method, Dielectric
And then, the sample Cylindrical micellar block copolymer patterned Au nanosheet coated on Si substrate was immersed in 1wt% of Titanium precursor solution for loading titanium ions to
The flake like crystallite morphology observed in CIS thin films under the optimized processing conditions was found to yield enhanced cathodic photoresponse under solar simulated light
Perovskite films using PbI2 films deposited with higher substrate temperatures 150 ºC possess large grain size and pinhole-free morphology, and these films show very high absorption
