MODUL 3
Sentral SPC
Sentral SPC
TUJUAN
TUJUAN
Memahami arsitektur sentral SPC digital,
Memahami arsitektur sentral SPC digital,
bagian-bagian/komponen dan fungsi
bagian-bagian/komponen dan fungsi
masing-komponen
masing-komponen
Memahami prinsip kerja sentral SPC digital
Memahami prinsip kerja sentral SPC digital
dalam proses panggilan (call processing)
1.
2.
3.
3.
Sentral Telepon Digital EWSD
Sentral Telepon Digital EWSD
Hardware Structure
Divided into 4 functions :
–
Access
unit (Access Unit)
–
Switching
Unit
(SN=Switching Network)
– Common Channel
signalling Network
Control
–
Control
Unit (CP =
Coordination Processor)
Common Channel Signalling
•
As an interface between
subscriber line or trunk
with central (Exchange)
•
Consists of :
– Digital Line Unit (DLU)
– Line Trunk Group (LTG)
A.
• As connector between analog or digital device(antara perangkat analog
atau digital yang berada di luar sentral EWSD dengan Switching Network.
• Pada LTG dapat terpasang saluran pelanggan, Trunk dan Digital Switch
Board (DSB)
• Sentral EWSD mempunyai 4 macam (tipe) LTG
–
LTGA
• Digunakan untuk saluran pelanggan analog
• Tiap unit LTGA mempunyai 8 buah LTU (Line Trunk Unit) • Kapasitas tiap unit LTGA : 256 port pelanggan
–
LTG B
• Merupakan terminasi ke :
– DLU (Digital Line Unit) untuk mencatu pelanggan (analog/digital).
– DSB (Digital Switch Board) untuk layanan khusus (special service) melalui operator seperti
layanan informasi nomor telepon/billing, sambungan interlokal/internasional, pengaduan gangguan dll.
• Kapasitas tiap unit LTGB = 4 sistem PCM30 (= 4x30 kanal voice)
– Untuk aplikasi DLU : maksimal dapat melayani hingga 952 pelanggan analog – Untuk aplikasi DSB : dapat dipasang 30 terminal/meja operator (switchboard)
–
LTG C
• Merupakan saluran sirkit trunk digital 4 DIU (Digital Interface Unit)
• Dapat dihubungkan dengan 120 trunk digital
–
LTG D
• Digunakan untuk trunk digital internasional menggunakan transmisi sateli, dilengkapi echo canceller
1)
Consists of :
• Group Prosesor (GP)
– Set the signalling Procedures – Set the SLC and LTG
– Supervision, Metering for call processing – Organize and process data exchange with CP – Scanning LTG ports
• Line Trunk Unit (LTU)
– Costumize subscriber line/trunk with LTG
• Digital Interface Unit (DIU)
– Connector EWSD with PCM transmission System
• Group Switch (GS)
– Connector for Functional units in LTG subscriber
• Speech Multiplexer (SPMX)
– Connector for Functional units in LTG Trunk connector
• Signalling Unit (SU)
– For Signalling process trunk and Subscriber
• Link Interface Unit (LIU)
– Mengadakan cross office check – Syncronization bits received SN
– Adjusting (menyesuaikan) clock with CCG
a)
Digital Line Unit
Digital Line Unit
•
As a analog, digital, and PABX
As a analog, digital, and PABX
termination subscriber line.
termination subscriber line.
•
Maximum capacity 9
Maximum capacity 9
52
52
subscribers
subscribers
linked to EWSD central
linked to EWSD central
office via 4 x PCM highway (120
office via 4 x PCM highway (120
Channels)
Channels)
2 LTG
2 LTG
for increased
availability
•
Can be placed one location with a
main or as a remote central
•
DLU Units :
DLU Units :
– Subscriber Line Module Analog Subscriber Line Module Analog (SLMA)
(SLMA)
– Subscriber Line Modul Digital (SLMD)Subscriber Line Modul Digital (SLMD)
– Ring Generator dan Metering Ring Generator dan Metering Generator (RGMG)
Generator (RGMG)
– Digital Interface Unit for DLU (DIUD)Digital Interface Unit for DLU (DIUD)
– Digital Line Unit Control (DLUC)Digital Line Unit Control (DLUC)
– Test Unit (TU)Test Unit (TU)
– Emergency Module for Pushbutton Emergency Module for Pushbutton Subscriber (EMSP)
Subscriber (EMSP)
– External Alarm Set (ALEX)External Alarm Set (ALEX)
2)
• SN merupakan bagian yang bertugas melaksanakan proses
penyambungan saluransaluran yang terhubung padanya
• Ada 2 prinsip penyambungan yang digunakan : time
switching dan space switching
• SN terdiri dari 3 modul switching :
– Time Stage Module (TSM), parameter 4/4
input,4/4
output
– Space Stage Module (SSM), parameter 16/16
– Space Stage Module (SSM),parameter 8/15
input, 15/8
output
– SN
DE3 : 4 TSM dan 1 SSM didupliksdi SN0 dan SN
1
, kapasitas
pelanggan : 300
0
pelanggan dan 1500 trunk
– SN
DE4 :16 TSM dan 4 SSM, kapasitas pelanggan : 1200
0
pelanggan dan 7500 trunk
– SN
DE5 : 16 TSM yang tergabung dalam satu Time Stage,
kapasitas pelanggan : 100.00
0
pelanggan dan 60.00 trunk
– Time Stage
Group (TSG) dan satu Space Stage Group (SSG)
yang merupakan gabungan dari 16 SSM 8/15 dan 15 SSM 16/16,
B.
a)
a)
Tipetipe SN
Tipetipe SN
i.
i.
SN DE3
SN DE3
ii.
ii.
SN DE4
SN DE4
iii.
iii.
SN DE4
SN DE4
Fungsi CP :
– Analizing number ruting and zoning – Operation and maintenance Exchange – Routing for call processing
– Giving alternatif route
– Analizing and send message for line/trunk – Trafik measurement
– Data Billing
– Menyekat peralatan yang rusak
Functional Units
– Siemen Switching Processor (SSP):
• Processing Unit (PU) • Memory Unit (MU)
• Input/Output Processor (IOP)
– Message Buffer (MB)
• Sebagai interface peripheral processor (GP, DLUC, SGC) dengan PU
– Central Clock Generator (CCG)
• Pengmbangkit clock sentral