INFLUENCE OF VOLUME AND ANGLE ATTACK OF PELTON TURBINE BUCKET ON THE EFFICIENCY OF MICRO HYDRO.
Teks penuh
Gambar
Dokumen terkait
When a micro-hydro power location is available which has a large water discharge and a low head, then the use of the model propeller turbine is most appropriate to achieve
Figure 3 shows the relation between water discharge (Q) and turbine rotation speed (n ) for all values of turbine shaft slope ( è ).. Figure 3 shows that turbine rotational
Mechanical components micro hydro power plant consists of blade of screw turbine, housing turbine and frame holder of screw turbine. The component of screw turbines are
Table 2 shows the amount of change of the percentage of the turbine rotation speed when changing the direction of the wind, and therefore the percentage of change of the efficiency
The research related to the configuration of the new Savonius wind turbine with slotted blades to improve the effect of torque performance and wind turbine generator power by varying
The purpose of this research is to modify the pump as a turbine for a micro-hydro power plant which can be used by students of the Mechanical Engineering Study Program, the University
In this study, a comparison of the number of turbine blades was carried out using the Computational Fluid Dynamics CFD method, three models are 11, 13, and 15 blade impeller turbines
2021 Invelox wind turbine Ducted wind turbine The angle of exit diffuser and throat section velocity Experimental analysis Efficiency and rotor torque 6 Abolfazl
