• Tidak ada hasil yang ditemukan

Optimasi Hidrolisis Selulosa dari Tandan Kosong Kelapa Sawit menjadi Selulosa Mikrokristal dan Aplikasi sebagai Pengisi pada Komposit Polimer Termoplastik Pati Singkong

N/A
N/A
Protected

Academic year: 2017

Membagikan "Optimasi Hidrolisis Selulosa dari Tandan Kosong Kelapa Sawit menjadi Selulosa Mikrokristal dan Aplikasi sebagai Pengisi pada Komposit Polimer Termoplastik Pati Singkong"

Copied!
12
0
0

Teks penuh

(1)

DAFTAR PUSTAKA

Abdelmouleh, M., S. Boufi, M.N. Belgacem, A. Dufresne dan A. Gandini. “Modification of Cellulose Fibers with Functionalized Silanes: Effect of The Fiber Treatment on The Mechanical Performances of Cellulose – Thermoset Composites”. Journal of Applied Polymer Science. Vol. 98. 2005. Hal. 974 – 984.

Abdul Azis, A., B. Mohammadiah dan Rosnah Mat Soom. “Preparation of Alpha Cellulose from Palm Fruit Mesocarp”. Proceeding of the 14th Malaysian Biochemical Society Conference. 1989.

Adel, Abeer M., Zeinab H. Abd El-Wahab, Atef A. Ibrahim dan Mona T. Al-Shemy. “Characterization of Microcrystalline Cellulose prepared from Lignocellulosic Materials. Part I : Acid Catalyzed Hydrolysis”. Bioresources Technology. Vol. 101. 2010. Hal. 4446 – 4455.

Adel, Abeer M., Zeinab H. Abd El-Wahab, Atef A. Ibrahim dan Mona T. Al-Shemy. “Characterization of Microcrystalline Cellulose prepared from Lignocellulosic Materials. Part II : Physicochemichal Properties”. Carbohydrate Polymers Journal. Vol. 83. 2011. Hal. 676 – 687

Angellier, H., Boisseau S. Molina, P. Dole dan A. Dufresne. “Thermoplastic – waxy Maize Starch Nanocrystal Nanocomposites”. Biomacromolecules. Vol. 7. 2006. Hal. 531 – 539.

Azubuike, Chukwuemeka P., Jimson O. Odulaja dan Augustine O. Okhamafe. “Physicotechnical, Spectroscopic and Thermogravimetric Properties of Powdered Cellulose and Microcrystalline Cellulose derived from Groundnut Shells”. Journal Excipients and Food Chemistry. Vol. 3. No. 3. 2012. Hal. 106 – 115.

Azubuike, Chukwuemeka P. dan Augustine O. Okhamafe. “Physicochemical, Spectroscopic and Thermal Properties of Microcrystalline Cellulose derived from Corn Cobs”. International Journal of Recycling of Organic Waste in Agriculture. Vol. 1. No. 9. 2012.

(2)

Battista, O.A. dan Patricia A. Smith. http://www.google.com/patents/US2978446. Google Patents. 20 September 2013.

Bergo, P.V.A., R.A. Carvalho, P.J.A. Sobral, R.M.C. dos Santos, F.B.R. da Silva, J.M. Prison, J. Solorza Feria dan A.M.Q.B. Habitante. “Physical Properties of Edible Films based on Cassava Starch as affected by The Plasticizer Concentration”. Packaging Technology and Science. Vol. 21. No. 2. 2007. Hal. 85 – 89.

Bhimte, Nitin A. dan Pralhad T. Tayade. “Evaluation of Microcrystalline Cellulose prepared from Sisal Fibers as a Tablet Excipient : A Technical Note”. AAPS PharmSciTech. Vol. 8. No. 1. 2007.

Bourtoom, Thawien. “Plasticizer Effect on the Properties of Biodegradable Blend Film from Rice Starch Chitosan”. Songklanakarin Journal Science Technology. Vol. 30. 2008. Hal. 149 – 165.

Brown, G.M dan F. Ellyin. “Assesing The Predictive Capability of Two Phase Models for The Mechanical Behavior of Alumina/Epoxy Nanocomposites”. Journal of Applied Polymer Science. Vol. 98. 2005. Hal. 869 – 879.

Cao, X., Y. Chen, P.R. Chang, A.D. Muir dan G. Falk. “Starch-based Nanocomposites Reinforced with Flax Cellulose Nanocrystals”. Express Polymer Letters. Vol. 2. No. 7. 2008. Hal. 502 – 510.

Chauhan, Yuvraj P., R.S. Sapkal, V.S. Sapkal dan G.S. Zamre. “Microcrystalline Cellulose from Cotton Rags (Waste from Garment and Hosiery Industries”. International Journal Chemistry and Science. Vol. 7. No. 2. 2009. Hal. 681 – 688.

Chuayjuljit, S., S. Su-uthai dan S. Charuchinda. “Poly (vinyl chloride) Film Filled with Microcrystalline Cellulose prepared from Cotton Fabric Waste : Properties and Biodegradability Study”. Journal of the International Solid Wastes & Public Cleansing Association, ISWA. Vol. 28. No. 2. 2010 Hal. 109 – 117.

Ciolacu, Diana, Florin Ciolacu dan Valentin I. Popa. “ Amorphous Cellulose – Structure and Characterization”. Cellulose Chemistry and Technology. Vol. 45. 2011. Hal. 13 – 21.

(3)

Da Rz, A.L., A.J.F. Carvalho, A. Gandini dan A.A.S. Curvelo. “The Effect of Plasticizers on Thermoplastic Starch Compositions obtained by Melt Processing”. Carbohydrate Polymers. Vol. 63. 2006. Hal. 417 – 424.

Das, Kunal, Dipa Ray, N.R. Bandyopadhyay. Tony Ghosh, Amar K. Mohanty dan Manjusri Misra. “A Study of the Mechanical, Thermal and Morphological Properties of Microcrystalline Cellulose Particles Prepared from Cotton Slivers using Different Acid Concentrations”. Cellulose. Vol. 16. 2009. Hal. 783 – 793.

Dufresne, Alain. “Processing of Polymer Nanocomposites Reinforced with Polysaccharide Nanocrystals”. Molecules. Vol. 15. 2010. Hal. 4111 – 4128.

Dufresne, A., Daniele Dupeyre dan Michel R. Vignon. “Cellulose Microfibrils from Potato Tuber Cells : Processing and Characterization of Starch – Cellulose Microfibril Composites”. Journal of Applied Polymer Science. Vol. 76. 2000. Hal. 2080 – 2092.

Dufresne, A dan M.R. Vignon. “Improvement of Starch Film Performances using Cellulose Microfibrils”. Macromolecules. Vol. 31. 1998. Hal. 2693 – 2696.

Eichhorn, S.J., A. Dufresne, M. Aranguren, N.E. Marcovich, J.R. Capadona, S.J. Rowan, C. Weder, W. Thielemans, M. Roman, S. Renneckar, W. Gindl, S. Veigel, J. Keckes, H. Yano, K. Abe, M. Nogi, A.N. Nakagaito, A. Mangalam, J. Simonsen, A.S. Benight, A. Bismarck, L.A. Berglund dan T. Peijs. “Review: Current International Research into Cellulose Nanofibres and nanocomposites”. Journal of Material Science. Vol. 45. 2010. Hal. 1 – 33.

Ejikeme, Paul Madus. “Investigation of the Physicochemical Properties of Microcrystalline Cellulose from Agricultural Wastes I : Orange Mesocarp”. Cellulose. Vol. 15. 2008. Hal. 141 – 147.

El-Sakhawy, Mohamed dan Mohammad L. Hassan. “Physical and Mechanical Properties of Microcrystalline Cellulose Prepared from Agricultural Residues”. Carbohydrate Polymers. Vol. 67. 2007. Hal. 1 – 10.

(4)

Gehlen, Marcelo H. “Kinetics of Autocatalytic Acid Hydrolysis of Cellulose with Crystalline and Amorphous Fractions”. Cellulose. Vol. 17. 2010. Hal. 245 – 252.

Haafiz, M.K. Mohamad, S.J. Eichhorn, Azman Hassan dan M. Jawaid. “Isolation and Characterization of Mycrocrystalline Cellulose from Oil Palm Biomass Residue”. Carbohydrate Polymers. Vol. 93. 2013. Hal. 628 – 634.

Haafiz, M.K. Mohamad, Azman Hassan, Zainoha Zakaria, I.M. Inuwa, M.S. Islam dan M. Jawaid. “Properties of Polylactic Acid Composites reinforced with Oil Palm Biomass Microcrystalline Cellulose”. Carbohydrate Polymers. Vol. 98. 2013. Hal. 139 – 145.

Halasz, Katalin, Levente Csoka dan Rita Rakosa. “Application of Nano and Micro Sized Cellulose Crystals in Poly (lactic) acid”. International Scientific Conference on Sustainable Development & Ecological Footprint. 2012.

Halim, Auzal, Elfi Sahlan Ben dan Ermi Sulastri. “Pembuatan Mikrokristalin Selulosa dari Jerami Padi (Oryza sativa linn) dengan Variasi Waktu Hidrolisa”. Jurnal Sains dan Teknologi Farmasi Jurusan Farmasi FMIPA Universitas Andalas. Vol. 7. No. 2. 2002. Hal. 80 – 87.

Hanna, Milford, Gerald Biby dan Vesselin Miladinov. “Production of Microcrystalline Cellulose by Reactive Extrusion”. Industrial Agricultural Products Center – Publication & Information. 2001.

Hemanth, L.R., Rashmi S. Hulagurmath, R. Suresh, Roopa L. Farshi dan S.H. Kavitha. “Development of Microcrystalline Cellulose from Groundnut Shells for Cadmium Degradation”. Biotechnology Bioinformatics Bioengineering. Vol. 1. No. 3. 2011. Hal. 375 – 380.

Herawati, Heni. “Karakterisasi Pola Gelatinisasi Tapioka dengan mempergunakan Alat Microwave”. Prosiding PPI Standarisasi. 2010. Hal. 1 – 9.

Hiemenz, PC dan R. Rajagopalan. Principles of Colloid and Surface Science. CRC Press. New York. 1997.

Hotle, B.T., J.M. Considine, M.J. Wald, R.E. Rowlands dan K.T. Turner. “Effects of Thermal Aging on Mechanical Performance of Paper”. Proceeding of the Xith International Congress and Exposition. 2008.

(5)

Propagation”. Composites Science and Technology. Vol. 66. 2006. Hal. 2743 – 2757.

Hulleman, S.H.D., Frank H.P. Janssen dan Herman Feil. “The Role of Water during the Plasticization of Native Starches”. Polymer. Vol. 39. 1998. Hal. 2034 – 2048.

Hulleman, S.H.D, M.G. Kalisvaart, F.H.P. Janssen, H. Feil dan J.F.G Vliegenthart. “Origins of B-type Crystallinity in Glycerol – plasticized, Compression – moulded Potato Starches”. Carbohydrate Polymers. Vol. 39. 1999. Hal. 351 – 360.

Hunter, RJ. Foundations of Colloid Science. Oxford University Press. Oxford. 2001.

Ibrahim, Maha M., Waleed K. El-Zawawy, Yvonne Juttke, Andreas Koschella dan Thomas Heinze. “Cellulose and Microcrystalline Cellulose from Rice Straw and Banana Plant Waste : Preparation and Characterization”. Cellulose. 2013.

Ilindra, Ambuj dan J.D. Dhake. “Microcrystalline Cellulose from Bagasse and Rice Straw”. Indian Journal of Chemical Technology. Vol. 15. 2008. Hal. 497 – 499.

Iriawan, Nur dan Septin Puji Astuti. Mengolah Data Statistik dengan Mudah menggunakan Minitab 14. Edisi I. Yogyakarta. CV. Andi Offset. 2006. Hal. 296 – 308.

Jahan, M. Sarwar, Abrar Saeed, Zhibin He dan Yonghao Ni. “Jute as A Raw Material for the Preparation of Microcrystalline Cellulose”. Cellulose. Vol. 18. No. 2. 2011. Hal. 451 – 459.

Jansen, L.P.B.M dan L. Moscicki. “Thermoplastic Starch as Packaging Material”. Acta Science Polymer Technica Agraria. Vol. 5. 2006. Hal. 19 – 25.

Jeefferie, A.R., O. Nurul Fariha, A.R. Mohd. Warikh, M.Y. Yuhazri, Haeryip Sihombing dan J. Ramli. “Preliminary Study on the Physical and Mechanical Properties of Tapioca Starch/Sugarcane Fiber Cellulose Composite”. ARPN Journal of Engineering and Applied Sciences. Vol. 6. No. 4. 2011. Hal. 7 – 15.

(6)

John, Maya Jacob dan Sabu Thomas. “Biofibres and Biocomposites”. Carbohydrate Polymers. Vol. 71. 2008. Hal. 343 – 364.

Jose, Jasmin P, Sant Kumar Malhotra, Sabu Thomas, Kuruvilla Joseph, Koichi Goda dan Meyyarappallil Sadasivan Sreekala. “Advances in Polymer Composites : Macro- and Microcomposites – State of the Art, New Challenges and Opportunities”. Polymer Composites. Vol. 1. 2012. Hal. 3 – 15.

Kampeerapappun, Piyaporn, Kawee Srikulkit dan Duanghathai Pentrakoon. “Preparation of Cassava Starch/Montmorillonite Nanocomposite Film”. Journal Science Research Chulalongkorn University. Vol. 29. No. 2. 2004. Hal. 183 – 197.

Keshk, Sherif M.A.S dan Mohammad Abu Haija. “A New Method for Producing Microcrystalline Cellulose from Gluconacetobacter xylinus and Kenaf”. Carbohydrate Polymers. Vol. 84. 2011. Hal. 1301 – 1305.

Khalil, H.P.S. Abdul, A.H. Bhat dan A.F. Ireana Yusra. “Green Composites from Sustainable Cellulose Nanofibrils : A Review”. Carbohydrate Polymers. Vol. 87. 2012. Hal. 963 – 979.

Laka, Marianna dan Svetlana Chernyavskaya. “Obtaining Microcystalline Cellulose from Softwood and Hardwood Pulp”. BioResources. Vol. 2. No. 3. 2007. Hal. 583 – 589.

Leblanc, N. R. Saiah, E. Beucher dan R. Gattin. “Structural Investigation and Thermal Stabililty of New Extruded Wheat Flour based Polymeric Materials”. Carbohydrate Polymers. Vol 73. 2008. Hal. 548 – 557.

Li, Guo Mei dan Luo Cang Xue. “Optimization of the Preparation of Microcrystalline Cellulose from Apple Pomace”. Food Science. Vol. 32. No. 4. 2011. Hal. 54 – 58.

Liu, Dagang, Tuhua Zhong, Peter R. Chang, Kaifu Li dan Qinglin Wu. “Starch Composites Reinforced by Bamboo Crystals”. Bioresources Technology. Vol.101. 2010. Hal. 2529 – 2536.

(7)

Ma, Xiaofei, Peter R. Chang, Jiugao Yu dan Peilin Lu. “Electrically Conductive Carbon Black (CB)/Glycerol Plasticized-Starch (GPS) Composites Prepared by Microwave Radiation”. Starch. Vol. 60. No. 7. 2008. Hal. 373 – 375.

Mali, S., L.S. Sakanaka, F. Yamashita dan M.V.E. Grosmenn. “Water Sorption and Mechanical Properties of Cassava Starch Films and their Relation to Plasticizing Effect”. Carbohydrate Polymers. Vol. 60. 2005. Hal. 283.

Mason, R.L., R.F. Gunst, dan J.L. Hess. Statistical Design and Analysis of Experiments with Applications to Engineering and Science. 2nd Edition. John Wiley & Sons, Inc. United States of America. 2003.

Montgomery, Douglas C. Design and Analysis of Experiments. 5th Edition. John Wiley & Sons, Inc. United States of America. 2001. Hal. 427 – 499.

Nada, Abd_allah M.A., Mohamed Y. El-Kady, Essam S. Abd El-Sayed dan Fatma M. Amine. “Preparation and Characterization of Microcrystalline Cellulose (MCC)”. BioResources. Vol. 4. No. 4. 2009. Hal 1359 – 1371.

Nafchi, Abdorreza Mohammadi, Mahdiyeh Moradpour, Maliheh Saeidi dan Abd Karim Alias. “Review Thermoplastic Starches : Properties, Challenges and Prospect”. Starch. Vol. 65. 2013. Hal. 61 – 72.

Navia, Diana Paola dan Hector Samuel Villada. www.intechopen.com. Intech. 16 Juli 2013.

Nguyen, Xuan Truong. “Process for Preparing Microcrystalline Cellulose”. International Paper Company. 2006.

O’Connor, R.T., E.F. DuPre dan D. Mitcham. “Applications of Infrared Absorption Spectroscopy to Investigation of Cotton and Modified Cotton”. Textile Research Journal. Vol. 28. No. 5. 1958. Hal. 382 – 392.

Ohimain, Elijah I., Sylvester C. Izah dan Francis A.U. Obieze. “Material – mass Balance of Smallholder Oil Palm Processing in the Niger Delta, Nigeria”. Advance Journal of Food Science and Technology. Vol. 5. No. 3. 2013. Hal. 289 – 294.

(8)

Oyeniyi, Y.J. dan O.A. Itiola. “The Physicochemical Characteristic of Microcrystalline Cellulose Derived from Sawdust, Agricultural Waste Products”. International Journal of Pharmacy and Pharmaceutical Sciences. Vol. 4. No. 1. 2012.

Park, Sunkyu, John O. Baker, Michael E. Himmel, Philip A. Parilla dan David K. Johnson. “Cellulose Crystallinity Index: Measurement Techniques and Their Impact on Interpreting Cellulase Performance”. Biotechnology for Biofuels. Vol. 3. No. 10. 2010.

Pasaribu, Farida Arriany. “Peranan Gliserol sebagai Plastisiser dalam Film Pati Jagung dengan Pengisi Serbuk Halus Tongkol Jagung”. Tesis. Universitas Sumatera Utara. 2009.

Pavia, Donald L., Gary M. Lampman dan George S. Kriz. Introduction to Spectroscopy. 3rd Edition. John Wiley & Sons, Inc. United States of America. 2001. Hal. 13 – 101.

Picker-Freyer, K.M. “An Insight into the Process of Tablet Formation of Microcrystalline Cellulose : Structural Changes on An Nanoscale Level”. Journal of Thermal Analysis and Calorimetry. Vol. 89. 2007. Hal. 745 – 748.

Piyada, K., Waranyou S. dan Thawien W. “Mechanical, Thermal and Structural Properties of Rice Starch Films Reinforced with Rice Starch Nanocrystals”. International Food Research Journal. Vol. 20. No. 1. 2013. Hal. 439 – 449.

Prachayawarakorn, J. P. Sangnitidej dan P. Boonpasith. “Properties of Thermoplastic Rice Starch Composites Reinforced by Cotton Fiber or Low-Density Polyethylene”. Carbohydrate Polymers. Vol. 81. 2010. Hal. 425 – 433.

Sihna, R.S. dan M. Okamoto. “Polymer/Layered Silicate Nanocomposites: A Review from Preparation to Processing”. Progress in Polymer Science. Vol. 28. 2003. Hal. 1539 – 1641.

Siquiera, Gilberto, Julien Bras dan Alain Dufresne. “Cellulosic Bionanocomposites : A Review of Preparation, Properties and Applications”. Polymers. Vol. 2. 2010. Hal. 728 – 765.

(9)

Soom, Rosnah Mat, Astimar Abd Aziz, Wan Hasamudin Wan Hassan dan Ab Gapor Md Top. “Solid-state Characteristics of Microcrystalline Cellulose from Oil Palm Empty Fruit Bunch Fibre”. Journal of Oil Palm Research. Vol. 21. 2009. Hal. 613 – 620.

Soom, Rosnah Mat, Astimar Abd Aziz dan Wan Hasamudin Wan Hassan. “A Method of Producing Microcrystalline Cellulose from Biomass”. World Intellectual Property Organization. 2012.

Sorbal, P.J.A., F.C. Menegalli, M.D. Hubinger dan M.A. Rogues. “Mechanical, Water Vapour Barrier and Thermal Properties of Gelatin based Edible Film”. Food Hydro. Colloid. Vol. 15. No. 6. Hal. 423 – 432.

Souza, A.C., R. Benze, E.S. Ferrao, C. Ditchfield, A.C.V. Coelho dan C.C. Tadini. “Cassava Starch Biodegradable Films : Influence of Glycerol and Clay Nanoparticles Content on Tensile and Barrier Properties and Glass Transition Temperature”. LWT – Food Science and Technology. Vol. 46. 2012. Hal. 110 – 117.

Spagnola, C., F.H.A. Rodriguesa, A.G.B. Pereira, A.R. Fajardoa, A.F. Rubira dan E.C. Muniz. “Superabsorbent Hydrogel Composite made of Cellulose Nanofibrils and Chitosan-Graft-Poly(Acrylic Acid)”. Carbohydrate Polymers. Vol. 87. 2012. Hal. 2038 – 2045.

Srithongkham, Saniwan, Lalita Vivitchanont dan Chularat Krongtaew. “Starch/Cellulose Biocomposites Prepared by High – Shear Homogenization/Compression Molding”. Journal of Materials Science and Engineering. Vol. 2. No. 4. 2012. Hal. 213 – 222.

Stephens, C.H., P.M. Whitmore, H.R. Morris dan M.E. Bier. “Hydrolysis of the Amorphous Cellulose in Cotton – based Paper”. Biomacromolecules. Vol. 9. 2008. Hal. 1093 – 1099.

Stupinska, Halina, Edward Iller, Zbigniew Zimek, Dariusz Wawro, Danuta Ciechanska, Ewa Kopania, Jaroslaw Palenik, Slawomir Milezarek, Wlodzimierz Steplewski dan Grazyna Krzyzanowska. “An Environment – Friendly Method to Prepare Microcrystalline Cellulose”. Fibres and Textiles in Eastern Europe. Vol. 15. No. 5 – 6. 2007. Hal. 167 – 172.

(10)

Sun, Yong, Lu Lin, Haibo Deng, Jiazhe Li, Beihai He, Runchang Sun dan Pingkai Ouyang. “Structural Changes of Bamboo Cellulose in Formic Acid”. BioResources. Vol. 3. No. 2. 2008. Hal. 297 – 315.

Suvachitanont, S. dan P. Ratanapan. “Evaluation of Microcrystalline Cellulose from Corn Cob for Development to the Pharmaceutical Industry”. Proceeding of TIChE International Conference. 2011.

Takagi, H. “Biodegradation Behaviour of Starch based “Green” Composites reinforced by Manila Hamp Fibres”. Proceeding of 3rd International Conference on Eco – composites. Vol. V6. 2006. Hal. 1 – 14.

Takagi, H. dan A. Asano. “Effects of Processing Conditions on Flexural Properties of Cellulose Nanofibre Reinforced “Green” Composites”. Composites Part A : Applied Science and Manufacturing. Vol. 39. No.4. 2008. Hal. 685 – 689.

Takagi, H dan Y. Ichihara. “Effect of Fibre Length on Mechanical Properties of “Green” Composites using A Starch based Resin and Short Bamboo Fibres”. Japan Society of Mechanical Engineers International Journal Series A. Vol. 47. No. 4. 2004. Hal. 551 – 555.

Terinte, Nicoleta, Roger Ibbett dan Kurt Christian Schuster. “Overview on Native Cellulose and Microcrystalline Cellulose I Structure Studied by X-ray diffraction (WAXD) : Comparison between Measurement Techniques”. Lenzinger Berichte. Vol. 89. 2011. Hal. 118 – 131.

Uyigue, L dan O.O. Okwonna. “Conversion of Post-Consumer (or Waste) Printer’s Paper Grades into Microcrystalline Cellulose Powder”. Journal of Emerging Trends in Engineering and Applied Science (JETEAS). Vol. 4. No. 1. 2013. Hal. 126 – 132.

Van Soest, J.J.G, S.H.D. Hulleman, D. De Wit dan J.F.G. Vliegenthart. “Crystallinity in Starch Bioplastics”. Industrial Crops and Products. Vol. 5. 1996. Hal. 11 – 22.

Wang, Dan, Shi-bin Shang, Zhan-qian Song dan Myoung-Ku Lee. “Evaluation of Microcrystalline Cellulose prepared from Kenaf Fibers”. Journal of Industrial and Engineering Chemistry. Vol. 16. 2010. Hal. 152 – 156.

(11)

Wetzel, B., F. Haupert dan M.Q. Zhang. “Epoxy Nanocomposites with High Mechanical and Tribological Performance”. Composite Science Technology. 63. 2003. Hal. 2055 – 2067.

Willet, J.L. dan W.M. Doane. “Effect of Moisture Content on Tensile Properties of Starch/Poly(hydroxyester ether) Composite Materials”. Polymer. Vol. 43. 2002. Hal. 4413 – 4420.

Wittaya, Thawien. “Microcomposites of Rice Starch Film Reinforced with Microcrystalline Cellulose from Palm Pressed Fiber”. International Food Research Journal. Vol.16. 2009. Hal. 493 – 500.

Wittaya, Thawien. “Influence of Type and Concentration of Plasticizers on the Properties of Edible Film from Mung Bean Proteins”. KMTL Science and Technology Journal. Vol. 13. No. 1. 2013. Hal. 51 – 58.

Wu, Jen-Sen, Hsiu-O Ho dan Ming-Thau Sheu. “A Statistical Design to evaluate the Influence of Manufacturing Factors and Material Properties on the Mechanical Performances of Microcrystalline Cellulose”. Powder Technology. Vol. 118. 2001. Hal. 219 – 228.

Wu, Q. dan L. Zhang. “Preparation and Characterization of Thermoplastic Starch Mixed with Waterborne Polyurethane”. Industrial and Engineering Chemistry Research. Vol. 40. 2001. Hal 558 – 564.

Xiang, Q., Y.Y. Lee, P.O. Petterson dan R.W. Torget. “Heterogeneous Aspects of Acid Hydrolysis of α - cellulose”. Applied Biochemistry and Biotechnology. Vol. 105 – 108. 2003. Hal. 505 – 514.

Xiang, Q. J.S. Kim dan Y,Y, Lee. “A Comprehensive Kinetic Model for Dilute Acid Hydrolysis of Cellulose”. Applied Biochemistry and Biotechnology. Vol. 105 – 108. 2003. Hal. 337 – 352.

Yu, Long, Katherine Dean dan Lin Li. “Polymer Blends and Composites from Renewable Resources”. Progress in Polymer Science Journal. Vol. 31. 2006. Hal. 576 – 602.

(12)

Yusmarlela. “Studi Pemanfaatan Plastisiser Gliserol dalam Film Pati Ubi dengan Pengisi Serbuk Batang Ubi Kayu”. Tesis. Universitas Sumatera Utara. 2009.

Referensi

Dokumen terkait

[r]

Saat Ini pemakaian jasa internet sebagai sarana untuk memperoleh informasi tentang musik semakin banyak digunakan,karena jangkauannya yang luas, internet sangat ideal bila

Sehingga interaksi yang terjadi lebih up to date, karena di dalam aplikasi ini memberikan kemudahan bagi server untuk mengolah data dan informasi baru dengan cepat. Dari

Pejabat Pengadaan Barang / Jasa Bidang Sumber Daya Air Dinas Pekerjaan Umum dan ESDM Kabupaten

[r]

Belajar mengajar adalah suatu kegiatan yang bersifat edukatif. Nilai edukatif mewarnai interaksi yang terjadi antar guru dan anak didik. Interaksi yang bersifat edukatif

Peserta didik belajar lagi Peserta didik ikut sertifikasi tingkat derajat Tutor mengajar & membimbing sesuai kompe-tensi PESERTA DIDIK Tutor menguji peserta

Sholikhah, Pusparani dan Khakim Ghozali, (2009), “Rancang Bangun Sistem Informasi Penerimaan Siswa Baru Online”, Jurnal Fakultas Teknologi Informasi, Institut Teknologi